@@ -1803,8 +1803,8 @@ config DEBUG_UART_VIRT
default 0xfedc0000 if DEBUG_EP93XX
default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1
default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
- default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
- default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
+ default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
+ default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
default 0xfef36000 if DEBUG_HIGHBANK_UART
default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
@@ -45,21 +45,21 @@
* it can be used with the low-level debug code.
*/
#define IXP4XX_PERIPHERAL_BASE_PHYS 0xC8000000
-#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFEF00000)
+#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFEC00000)
#define IXP4XX_PERIPHERAL_REGION_SIZE 0x00013000
/*
* PCI Config registers
*/
#define IXP4XX_PCI_CFG_BASE_PHYS 0xC0000000
-#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFEF13000)
+#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFEC13000)
#define IXP4XX_PCI_CFG_REGION_SIZE 0x00001000
/*
* Expansion BUS Configuration registers
*/
#define IXP4XX_EXP_CFG_BASE_PHYS 0xC4000000
-#define IXP4XX_EXP_CFG_BASE_VIRT 0xFEF14000
+#define IXP4XX_EXP_CFG_BASE_VIRT 0xFEC14000
#define IXP4XX_EXP_CFG_REGION_SIZE 0x00001000
#define IXP4XX_EXP_CS0_OFFSET 0x00
@@ -120,6 +120,7 @@
#define IXP4XX_SSP_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000)
+/* The UART is explicitly put in the beginning of fixmap */
#define IXP4XX_UART1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
#define IXP4XX_UART2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
#define IXP4XX_PMU_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
@@ -9,8 +9,12 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/ixp4xx-regs.h>
+/*
+ * These are the only fixed phys to virt mappings we ever need
+ * we put it right after the UART mapping at 0xffc80000-0xffc81fff
+ */
+#define IXP4XX_EXP_CFG_BASE_PHYS 0xC4000000
+#define IXP4XX_EXP_CFG_BASE_VIRT 0xFEC14000
static struct map_desc ixp4xx_of_io_desc[] __initdata = {
/*
UART1, UART2 and the expansion bus config registers are the only registers mapped in a fixed location when using device tree. For device tree we also want to get rid of the custom <mach/io.h> for IXP4xx. So we need to undefine CONFIG_NEED_MACH_IO_H. Doing that activates the fixed mapping of the PCI IO space to PCI_IO_VIRT_BASE which is hardcoded to 0xFEE00000 and this would collide with the old fixed mappings. Move the fixed virtual IO base address from 0xFEF00000 to 0xFEC00000 in order to avoid the collision. For the OF-only boot path let's even cut the reliance on <mach/io.h> and just hardcode the one single virtbase we need apart from the UART, which is hardcoded in Kconfig.debug. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Zoltan HERPAI <wigyori@uid0.hu> Cc: Raylynn Knight <rayknight@me.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1->v2: - Instead of handling the UART and expansion ports separately just move all peripherals from 0xfef00000 to 0xfec00000. - Stay out of the fixmap area, that area has special uses. PCI maintainers: this patch is mostly FYI, will be merged through ARM SoC --- arch/arm/Kconfig.debug | 4 ++-- arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h | 7 ++++--- arch/arm/mach-ixp4xx/ixp4xx-of.c | 8 ++++++-- 3 files changed, 12 insertions(+), 7 deletions(-)