diff mbox series

[v9,18/26] PCI: pciehp: Trigger a domain rescan on hp events when enabled movable BARs

Message ID 20201218174011.340514-19-s.miroshnichenko@yadro.com
State New
Headers show
Series PCI: Allow BAR movement during boot and hotplug | expand

Commit Message

Sergei Miroshnichenko Dec. 18, 2020, 5:40 p.m. UTC 
With movable BARs, hot-adding a device is not a local event for its bridge,
but it affects the whole RC: BARs and bridge windows can be substantially
rearranged. So instead of trying to fit the new devices into pre-allocated
reserved gaps, initiate a full domain rescan.

The pci_rescan_bus() covers all the operations of the replaced functions:
 - assigning new bus numbers, as the pci_hp_add_bridge() does it;
 - allocating BARs -- pci_assign_unassigned_bridge_resources();
 - configuring MPS settings -- pcie_bus_configure_settings();
 - binding devices to their drivers -- pci_bus_add_devices().

Signed-off-by: Sergei Miroshnichenko <s.miroshnichenko@yadro.com>
---
 drivers/pci/hotplug/pciehp_pci.c | 5 +++++
 1 file changed, 5 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index d17f3bf36f70..6d4c1ef38210 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -58,6 +58,11 @@  int pciehp_configure_device(struct controller *ctrl)
 		goto out;
 	}
 
+	if (pci_can_move_bars) {
+		pci_rescan_bus(parent);
+		goto out;
+	}
+
 	for_each_pci_bridge(dev, parent)
 		pci_hp_add_bridge(dev);