Message ID | 20200930153519.7282-16-kishon@ti.com |
---|---|
State | New |
Headers | show |
Series | Implement NTB Controller using multiple PCI EP | expand |
Hi Kishon, > Subject: [PATCH v7 15/18] NTB: Add support for EPF PCI-Express Non- > Transparent Bridge > > From: Kishon Vijay Abraham I <kishon@ti.com> > > Add support for EPF PCI-Express Non-Transparent Bridge (NTB) device. > This driver is platform independent and could be used by any platform which > have multiple PCIe endpoint instances configured using the pci-epf-ntb driver. > The driver connnects to the standard NTB sub-system interface. The EPF NTB > device has configurable number of memory windows (Max 4), configurable > number of doorbell (Max 32), and configurable number of scratch-pad > registers. > > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > --- > drivers/ntb/hw/Kconfig | 1 + > drivers/ntb/hw/Makefile | 1 + > drivers/ntb/hw/epf/Kconfig | 6 + > drivers/ntb/hw/epf/Makefile | 1 + > drivers/ntb/hw/epf/ntb_hw_epf.c | 755 > ++++++++++++++++++++++++++++++++ > 5 files changed, 764 insertions(+) > create mode 100644 drivers/ntb/hw/epf/Kconfig create mode 100644 > drivers/ntb/hw/epf/Makefile create mode 100644 > drivers/ntb/hw/epf/ntb_hw_epf.c > > diff --git a/drivers/ntb/hw/Kconfig b/drivers/ntb/hw/Kconfig index > e77c587060ff..c325be526b80 100644 > --- a/drivers/ntb/hw/Kconfig > +++ b/drivers/ntb/hw/Kconfig > @@ -2,4 +2,5 @@ > source "drivers/ntb/hw/amd/Kconfig" > source "drivers/ntb/hw/idt/Kconfig" > source "drivers/ntb/hw/intel/Kconfig" > +source "drivers/ntb/hw/epf/Kconfig" > source "drivers/ntb/hw/mscc/Kconfig" > diff --git a/drivers/ntb/hw/Makefile b/drivers/ntb/hw/Makefile index > 4714d6238845..223ca592b5f9 100644 > --- a/drivers/ntb/hw/Makefile > +++ b/drivers/ntb/hw/Makefile > @@ -2,4 +2,5 @@ > obj-$(CONFIG_NTB_AMD) += amd/ > obj-$(CONFIG_NTB_IDT) += idt/ > obj-$(CONFIG_NTB_INTEL) += intel/ > +obj-$(CONFIG_NTB_EPF) += epf/ > obj-$(CONFIG_NTB_SWITCHTEC) += mscc/ > diff --git a/drivers/ntb/hw/epf/Kconfig b/drivers/ntb/hw/epf/Kconfig new > file mode 100644 index 000000000000..6197d1aab344 > --- /dev/null > +++ b/drivers/ntb/hw/epf/Kconfig > @@ -0,0 +1,6 @@ > +config NTB_EPF > + tristate "Generic EPF Non-Transparent Bridge support" > + depends on m > + help > + This driver supports EPF NTB on configurable endpoint. > + If unsure, say N. > diff --git a/drivers/ntb/hw/epf/Makefile b/drivers/ntb/hw/epf/Makefile new > file mode 100644 index 000000000000..2f560a422bc6 > --- /dev/null > +++ b/drivers/ntb/hw/epf/Makefile > @@ -0,0 +1 @@ > +obj-$(CONFIG_NTB_EPF) += ntb_hw_epf.o > diff --git a/drivers/ntb/hw/epf/ntb_hw_epf.c > b/drivers/ntb/hw/epf/ntb_hw_epf.c new file mode 100644 index > 000000000000..0a144987851a > --- /dev/null > +++ b/drivers/ntb/hw/epf/ntb_hw_epf.c > @@ -0,0 +1,755 @@ ...... > +static int ntb_epf_init_pci(struct ntb_epf_dev *ndev, > + struct pci_dev *pdev) > +{ > + struct device *dev = ndev->dev; > + int ret; > + > + pci_set_drvdata(pdev, ndev); > + > + ret = pci_enable_device(pdev); > + if (ret) { > + dev_err(dev, "Cannot enable PCI device\n"); > + goto err_pci_enable; > + } > + > + ret = pci_request_regions(pdev, "ntb"); > + if (ret) { > + dev_err(dev, "Cannot obtain PCI resources\n"); > + goto err_pci_regions; > + } > + > + pci_set_master(pdev); > + > + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)); > + if (ret) { > + ret = dma_set_mask_and_coherent(dev, > DMA_BIT_MASK(32)); > + if (ret) { > + dev_err(dev, "Cannot set DMA mask\n"); > + goto err_dma_mask; > + } > + dev_warn(&pdev->dev, "Cannot DMA highmem\n"); > + } > + > + ndev->ctrl_reg = pci_iomap(pdev, 0, 0); The second parameter of pci_iomap should be ndev->ctrl_reg_bar instead of the hardcode value 0, right? > + if (!ndev->ctrl_reg) { > + ret = -EIO; > + goto err_dma_mask; > + } > + > + ndev->peer_spad_reg = pci_iomap(pdev, 1, 0); pci_iomap(pdev, ndev->peer_spad_reg_bar, 0); > + if (!ndev->peer_spad_reg) { > + ret = -EIO; > + goto err_dma_mask; > + } > + > + ndev->db_reg = pci_iomap(pdev, 2, 0); pci_iomap(pdev, ndev->db_reg_bar, 0); Best Regards Sherry
Hi Sherry, On 09/11/20 3:07 pm, Sherry Sun wrote: > Hi Kishon, > >> Subject: [PATCH v7 15/18] NTB: Add support for EPF PCI-Express Non- >> Transparent Bridge >> >> From: Kishon Vijay Abraham I <kishon@ti.com> >> >> Add support for EPF PCI-Express Non-Transparent Bridge (NTB) device. >> This driver is platform independent and could be used by any platform which >> have multiple PCIe endpoint instances configured using the pci-epf-ntb driver. >> The driver connnects to the standard NTB sub-system interface. The EPF NTB >> device has configurable number of memory windows (Max 4), configurable >> number of doorbell (Max 32), and configurable number of scratch-pad >> registers. >> >> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> >> --- >> drivers/ntb/hw/Kconfig | 1 + >> drivers/ntb/hw/Makefile | 1 + >> drivers/ntb/hw/epf/Kconfig | 6 + >> drivers/ntb/hw/epf/Makefile | 1 + >> drivers/ntb/hw/epf/ntb_hw_epf.c | 755 >> ++++++++++++++++++++++++++++++++ >> 5 files changed, 764 insertions(+) >> create mode 100644 drivers/ntb/hw/epf/Kconfig create mode 100644 >> drivers/ntb/hw/epf/Makefile create mode 100644 >> drivers/ntb/hw/epf/ntb_hw_epf.c >> >> diff --git a/drivers/ntb/hw/Kconfig b/drivers/ntb/hw/Kconfig index >> e77c587060ff..c325be526b80 100644 >> --- a/drivers/ntb/hw/Kconfig >> +++ b/drivers/ntb/hw/Kconfig >> @@ -2,4 +2,5 @@ >> source "drivers/ntb/hw/amd/Kconfig" >> source "drivers/ntb/hw/idt/Kconfig" >> source "drivers/ntb/hw/intel/Kconfig" >> +source "drivers/ntb/hw/epf/Kconfig" >> source "drivers/ntb/hw/mscc/Kconfig" >> diff --git a/drivers/ntb/hw/Makefile b/drivers/ntb/hw/Makefile index >> 4714d6238845..223ca592b5f9 100644 >> --- a/drivers/ntb/hw/Makefile >> +++ b/drivers/ntb/hw/Makefile >> @@ -2,4 +2,5 @@ >> obj-$(CONFIG_NTB_AMD) += amd/ >> obj-$(CONFIG_NTB_IDT) += idt/ >> obj-$(CONFIG_NTB_INTEL) += intel/ >> +obj-$(CONFIG_NTB_EPF) += epf/ >> obj-$(CONFIG_NTB_SWITCHTEC) += mscc/ >> diff --git a/drivers/ntb/hw/epf/Kconfig b/drivers/ntb/hw/epf/Kconfig new >> file mode 100644 index 000000000000..6197d1aab344 >> --- /dev/null >> +++ b/drivers/ntb/hw/epf/Kconfig >> @@ -0,0 +1,6 @@ >> +config NTB_EPF >> + tristate "Generic EPF Non-Transparent Bridge support" >> + depends on m >> + help >> + This driver supports EPF NTB on configurable endpoint. >> + If unsure, say N. >> diff --git a/drivers/ntb/hw/epf/Makefile b/drivers/ntb/hw/epf/Makefile new >> file mode 100644 index 000000000000..2f560a422bc6 >> --- /dev/null >> +++ b/drivers/ntb/hw/epf/Makefile >> @@ -0,0 +1 @@ >> +obj-$(CONFIG_NTB_EPF) += ntb_hw_epf.o >> diff --git a/drivers/ntb/hw/epf/ntb_hw_epf.c >> b/drivers/ntb/hw/epf/ntb_hw_epf.c new file mode 100644 index >> 000000000000..0a144987851a >> --- /dev/null >> +++ b/drivers/ntb/hw/epf/ntb_hw_epf.c >> @@ -0,0 +1,755 @@ > ...... >> +static int ntb_epf_init_pci(struct ntb_epf_dev *ndev, >> + struct pci_dev *pdev) >> +{ >> + struct device *dev = ndev->dev; >> + int ret; >> + >> + pci_set_drvdata(pdev, ndev); >> + >> + ret = pci_enable_device(pdev); >> + if (ret) { >> + dev_err(dev, "Cannot enable PCI device\n"); >> + goto err_pci_enable; >> + } >> + >> + ret = pci_request_regions(pdev, "ntb"); >> + if (ret) { >> + dev_err(dev, "Cannot obtain PCI resources\n"); >> + goto err_pci_regions; >> + } >> + >> + pci_set_master(pdev); >> + >> + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)); >> + if (ret) { >> + ret = dma_set_mask_and_coherent(dev, >> DMA_BIT_MASK(32)); >> + if (ret) { >> + dev_err(dev, "Cannot set DMA mask\n"); >> + goto err_dma_mask; >> + } >> + dev_warn(&pdev->dev, "Cannot DMA highmem\n"); >> + } >> + >> + ndev->ctrl_reg = pci_iomap(pdev, 0, 0); > > The second parameter of pci_iomap should be ndev->ctrl_reg_bar instead of the hardcode value 0, right? > >> + if (!ndev->ctrl_reg) { >> + ret = -EIO; >> + goto err_dma_mask; >> + } >> + >> + ndev->peer_spad_reg = pci_iomap(pdev, 1, 0); > > pci_iomap(pdev, ndev->peer_spad_reg_bar, 0); > >> + if (!ndev->peer_spad_reg) { >> + ret = -EIO; >> + goto err_dma_mask; >> + } >> + >> + ndev->db_reg = pci_iomap(pdev, 2, 0); > > pci_iomap(pdev, ndev->db_reg_bar, 0); Good catch. Will fix it and send. Thank you for reviewing. Regards, Kishon
Hi Kishon, > Subject: Re: [PATCH v7 15/18] NTB: Add support for EPF PCI-Express Non- > Transparent Bridge > > Hi Sherry, > > On 09/11/20 3:07 pm, Sherry Sun wrote: > > Hi Kishon, > > > >> Subject: [PATCH v7 15/18] NTB: Add support for EPF PCI-Express Non- > >> Transparent Bridge > >> > >> From: Kishon Vijay Abraham I <kishon@ti.com> > >> > >> Add support for EPF PCI-Express Non-Transparent Bridge (NTB) device. > >> This driver is platform independent and could be used by any platform > >> which have multiple PCIe endpoint instances configured using the pci-epf- > ntb driver. > >> The driver connnects to the standard NTB sub-system interface. The > >> EPF NTB device has configurable number of memory windows (Max 4), > >> configurable number of doorbell (Max 32), and configurable number of > >> scratch-pad registers. > >> > >> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > >> --- > >> drivers/ntb/hw/Kconfig | 1 + > >> drivers/ntb/hw/Makefile | 1 + > >> drivers/ntb/hw/epf/Kconfig | 6 + > >> drivers/ntb/hw/epf/Makefile | 1 + > >> drivers/ntb/hw/epf/ntb_hw_epf.c | 755 > >> ++++++++++++++++++++++++++++++++ > >> 5 files changed, 764 insertions(+) > >> create mode 100644 drivers/ntb/hw/epf/Kconfig create mode 100644 > >> drivers/ntb/hw/epf/Makefile create mode 100644 > >> drivers/ntb/hw/epf/ntb_hw_epf.c > >> > >> diff --git a/drivers/ntb/hw/Kconfig b/drivers/ntb/hw/Kconfig index > >> e77c587060ff..c325be526b80 100644 > >> --- a/drivers/ntb/hw/Kconfig > >> +++ b/drivers/ntb/hw/Kconfig > >> @@ -2,4 +2,5 @@ > >> source "drivers/ntb/hw/amd/Kconfig" > >> source "drivers/ntb/hw/idt/Kconfig" > >> source "drivers/ntb/hw/intel/Kconfig" > >> +source "drivers/ntb/hw/epf/Kconfig" > >> source "drivers/ntb/hw/mscc/Kconfig" > >> diff --git a/drivers/ntb/hw/Makefile b/drivers/ntb/hw/Makefile index > >> 4714d6238845..223ca592b5f9 100644 > >> --- a/drivers/ntb/hw/Makefile > >> +++ b/drivers/ntb/hw/Makefile > >> @@ -2,4 +2,5 @@ > >> obj-$(CONFIG_NTB_AMD) += amd/ > >> obj-$(CONFIG_NTB_IDT) += idt/ > >> obj-$(CONFIG_NTB_INTEL) += intel/ > >> +obj-$(CONFIG_NTB_EPF) += epf/ > >> obj-$(CONFIG_NTB_SWITCHTEC) += mscc/ diff --git > >> a/drivers/ntb/hw/epf/Kconfig b/drivers/ntb/hw/epf/Kconfig new file > >> mode 100644 index 000000000000..6197d1aab344 > >> --- /dev/null > >> +++ b/drivers/ntb/hw/epf/Kconfig > >> @@ -0,0 +1,6 @@ > >> +config NTB_EPF > >> + tristate "Generic EPF Non-Transparent Bridge support" > >> + depends on m > >> + help > >> + This driver supports EPF NTB on configurable endpoint. > >> + If unsure, say N. > >> diff --git a/drivers/ntb/hw/epf/Makefile > >> b/drivers/ntb/hw/epf/Makefile new file mode 100644 index > >> 000000000000..2f560a422bc6 > >> --- /dev/null > >> +++ b/drivers/ntb/hw/epf/Makefile > >> @@ -0,0 +1 @@ > >> +obj-$(CONFIG_NTB_EPF) += ntb_hw_epf.o > >> diff --git a/drivers/ntb/hw/epf/ntb_hw_epf.c > >> b/drivers/ntb/hw/epf/ntb_hw_epf.c new file mode 100644 index > >> 000000000000..0a144987851a > >> --- /dev/null > >> +++ b/drivers/ntb/hw/epf/ntb_hw_epf.c > >> @@ -0,0 +1,755 @@ > > ...... > >> +static int ntb_epf_init_pci(struct ntb_epf_dev *ndev, > >> + struct pci_dev *pdev) > >> +{ > >> + struct device *dev = ndev->dev; > >> + int ret; > >> + > >> + pci_set_drvdata(pdev, ndev); > >> + > >> + ret = pci_enable_device(pdev); > >> + if (ret) { > >> + dev_err(dev, "Cannot enable PCI device\n"); > >> + goto err_pci_enable; > >> + } > >> + > >> + ret = pci_request_regions(pdev, "ntb"); > >> + if (ret) { > >> + dev_err(dev, "Cannot obtain PCI resources\n"); > >> + goto err_pci_regions; > >> + } > >> + > >> + pci_set_master(pdev); > >> + > >> + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)); > >> + if (ret) { > >> + ret = dma_set_mask_and_coherent(dev, > >> DMA_BIT_MASK(32)); > >> + if (ret) { > >> + dev_err(dev, "Cannot set DMA mask\n"); > >> + goto err_dma_mask; > >> + } > >> + dev_warn(&pdev->dev, "Cannot DMA highmem\n"); > >> + } > >> + > >> + ndev->ctrl_reg = pci_iomap(pdev, 0, 0); > > > > The second parameter of pci_iomap should be ndev->ctrl_reg_bar instead > of the hardcode value 0, right? > > > >> + if (!ndev->ctrl_reg) { > >> + ret = -EIO; > >> + goto err_dma_mask; > >> + } > >> + > >> + ndev->peer_spad_reg = pci_iomap(pdev, 1, 0); > > > > pci_iomap(pdev, ndev->peer_spad_reg_bar, 0); > > > >> + if (!ndev->peer_spad_reg) { > >> + ret = -EIO; > >> + goto err_dma_mask; > >> + } > >> + > >> + ndev->db_reg = pci_iomap(pdev, 2, 0); > > > > pci_iomap(pdev, ndev->db_reg_bar, 0); > > Good catch. Will fix it and send. Thank you for reviewing. You're welcome. By the way, since I've studied VOP(virtio over pcie) before, and only recently learned about NTB related code. I have some questions about NTB. For NTB, in order to make two(or more) different systems to communicate with each other, seems at least three boards are required(two host boards and one board with multiple EP instances as bridge), right? But for VOP, only two boards are needed(one board as host and one board as card) to realize the communication between the two systems, so my question is what are the advantages of using NTB? Because I think the architecture of NTB seems more complicated. Many thanks! Best regards Sherry > > Regards, > Kishon
Hi Sherry, On 10/11/20 7:55 am, Sherry Sun wrote: > Hi Kishon, > >> Subject: Re: [PATCH v7 15/18] NTB: Add support for EPF PCI-Express Non- >> Transparent Bridge >> >> Hi Sherry, >> >> On 09/11/20 3:07 pm, Sherry Sun wrote: >>> Hi Kishon, >>> >>>> Subject: [PATCH v7 15/18] NTB: Add support for EPF PCI-Express Non- >>>> Transparent Bridge >>>> >>>> From: Kishon Vijay Abraham I <kishon@ti.com> >>>> >>>> Add support for EPF PCI-Express Non-Transparent Bridge (NTB) device. >>>> This driver is platform independent and could be used by any platform >>>> which have multiple PCIe endpoint instances configured using the pci-epf- >> ntb driver. >>>> The driver connnects to the standard NTB sub-system interface. The >>>> EPF NTB device has configurable number of memory windows (Max 4), >>>> configurable number of doorbell (Max 32), and configurable number of >>>> scratch-pad registers. >>>> >>>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> >>>> --- >>>> drivers/ntb/hw/Kconfig | 1 + >>>> drivers/ntb/hw/Makefile | 1 + >>>> drivers/ntb/hw/epf/Kconfig | 6 + >>>> drivers/ntb/hw/epf/Makefile | 1 + >>>> drivers/ntb/hw/epf/ntb_hw_epf.c | 755 >>>> ++++++++++++++++++++++++++++++++ >>>> 5 files changed, 764 insertions(+) >>>> create mode 100644 drivers/ntb/hw/epf/Kconfig create mode 100644 >>>> drivers/ntb/hw/epf/Makefile create mode 100644 >>>> drivers/ntb/hw/epf/ntb_hw_epf.c >>>> >>>> diff --git a/drivers/ntb/hw/Kconfig b/drivers/ntb/hw/Kconfig index >>>> e77c587060ff..c325be526b80 100644 >>>> --- a/drivers/ntb/hw/Kconfig >>>> +++ b/drivers/ntb/hw/Kconfig >>>> @@ -2,4 +2,5 @@ >>>> source "drivers/ntb/hw/amd/Kconfig" >>>> source "drivers/ntb/hw/idt/Kconfig" >>>> source "drivers/ntb/hw/intel/Kconfig" >>>> +source "drivers/ntb/hw/epf/Kconfig" >>>> source "drivers/ntb/hw/mscc/Kconfig" >>>> diff --git a/drivers/ntb/hw/Makefile b/drivers/ntb/hw/Makefile index >>>> 4714d6238845..223ca592b5f9 100644 >>>> --- a/drivers/ntb/hw/Makefile >>>> +++ b/drivers/ntb/hw/Makefile >>>> @@ -2,4 +2,5 @@ >>>> obj-$(CONFIG_NTB_AMD) += amd/ >>>> obj-$(CONFIG_NTB_IDT) += idt/ >>>> obj-$(CONFIG_NTB_INTEL) += intel/ >>>> +obj-$(CONFIG_NTB_EPF) += epf/ >>>> obj-$(CONFIG_NTB_SWITCHTEC) += mscc/ diff --git >>>> a/drivers/ntb/hw/epf/Kconfig b/drivers/ntb/hw/epf/Kconfig new file >>>> mode 100644 index 000000000000..6197d1aab344 >>>> --- /dev/null >>>> +++ b/drivers/ntb/hw/epf/Kconfig >>>> @@ -0,0 +1,6 @@ >>>> +config NTB_EPF >>>> + tristate "Generic EPF Non-Transparent Bridge support" >>>> + depends on m >>>> + help >>>> + This driver supports EPF NTB on configurable endpoint. >>>> + If unsure, say N. >>>> diff --git a/drivers/ntb/hw/epf/Makefile >>>> b/drivers/ntb/hw/epf/Makefile new file mode 100644 index >>>> 000000000000..2f560a422bc6 >>>> --- /dev/null >>>> +++ b/drivers/ntb/hw/epf/Makefile >>>> @@ -0,0 +1 @@ >>>> +obj-$(CONFIG_NTB_EPF) += ntb_hw_epf.o >>>> diff --git a/drivers/ntb/hw/epf/ntb_hw_epf.c >>>> b/drivers/ntb/hw/epf/ntb_hw_epf.c new file mode 100644 index >>>> 000000000000..0a144987851a >>>> --- /dev/null >>>> +++ b/drivers/ntb/hw/epf/ntb_hw_epf.c >>>> @@ -0,0 +1,755 @@ >>> ...... >>>> +static int ntb_epf_init_pci(struct ntb_epf_dev *ndev, >>>> + struct pci_dev *pdev) >>>> +{ >>>> + struct device *dev = ndev->dev; >>>> + int ret; >>>> + >>>> + pci_set_drvdata(pdev, ndev); >>>> + >>>> + ret = pci_enable_device(pdev); >>>> + if (ret) { >>>> + dev_err(dev, "Cannot enable PCI device\n"); >>>> + goto err_pci_enable; >>>> + } >>>> + >>>> + ret = pci_request_regions(pdev, "ntb"); >>>> + if (ret) { >>>> + dev_err(dev, "Cannot obtain PCI resources\n"); >>>> + goto err_pci_regions; >>>> + } >>>> + >>>> + pci_set_master(pdev); >>>> + >>>> + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)); >>>> + if (ret) { >>>> + ret = dma_set_mask_and_coherent(dev, >>>> DMA_BIT_MASK(32)); >>>> + if (ret) { >>>> + dev_err(dev, "Cannot set DMA mask\n"); >>>> + goto err_dma_mask; >>>> + } >>>> + dev_warn(&pdev->dev, "Cannot DMA highmem\n"); >>>> + } >>>> + >>>> + ndev->ctrl_reg = pci_iomap(pdev, 0, 0); >>> >>> The second parameter of pci_iomap should be ndev->ctrl_reg_bar instead >> of the hardcode value 0, right? >>> >>>> + if (!ndev->ctrl_reg) { >>>> + ret = -EIO; >>>> + goto err_dma_mask; >>>> + } >>>> + >>>> + ndev->peer_spad_reg = pci_iomap(pdev, 1, 0); >>> >>> pci_iomap(pdev, ndev->peer_spad_reg_bar, 0); >>> >>>> + if (!ndev->peer_spad_reg) { >>>> + ret = -EIO; >>>> + goto err_dma_mask; >>>> + } >>>> + >>>> + ndev->db_reg = pci_iomap(pdev, 2, 0); >>> >>> pci_iomap(pdev, ndev->db_reg_bar, 0); >> >> Good catch. Will fix it and send. Thank you for reviewing. > > You're welcome. > By the way, since I've studied VOP(virtio over pcie) before, and only recently learned > about NTB related code. I have some questions about NTB. > > For NTB, in order to make two(or more) different systems to communicate with each other, > seems at least three boards are required(two host boards and one board with multiple EP > instances as bridge), right? right, this series is about creating NTB bridge by configuring multiple EP instances in an SoC, however there are also dedicated HW NTB switches (internally they might as well use multiple EP instances). > But for VOP, only two boards are needed(one board as host and one board as card) to realize the > communication between the two systems, so my question is what are the advantages of using NTB? NTB is a bridge that facilitates communication between two different systems. So it by itself will not be source or sink of any data unlike a normal EP to RP system (or the VOP) which will be source or sink of data. > Because I think the architecture of NTB seems more complicated. Many thanks! yeah, I think it enables a different use case all together. Consider you have two x86 HOST PCs (having RP) and they have to be communicate using PCIe. NTB can be used in such cases for the two x86 PCs to communicate with each other over PCIe, which wouldn't be possible without NTB. Regards, Kishon
On Tue, Nov 10, 2020 at 3:20 PM Kishon Vijay Abraham I <kishon@ti.com> wrote: > On 10/11/20 7:55 am, Sherry Sun wrote: > > But for VOP, only two boards are needed(one board as host and one board as card) to realize the > > communication between the two systems, so my question is what are the advantages of using NTB? > > NTB is a bridge that facilitates communication between two different > systems. So it by itself will not be source or sink of any data unlike a > normal EP to RP system (or the VOP) which will be source or sink of data. > > > Because I think the architecture of NTB seems more complicated. Many thanks! > > yeah, I think it enables a different use case all together. Consider you > have two x86 HOST PCs (having RP) and they have to be communicate using > PCIe. NTB can be used in such cases for the two x86 PCs to communicate > with each other over PCIe, which wouldn't be possible without NTB. I think for VOP, we should have an abstraction that can work on either NTB or directly on the endpoint framework but provide an interface that then lets you create logical devices the same way. Doing VOP based on NTB plus the new NTB_EPF driver would also work and just move the abstraction somewhere else, but I guess it would complicate setting it up for those users that only care about the simpler endpoint case. Arnd
Hi Sherry, Arnd, On 10/11/20 8:29 pm, Arnd Bergmann wrote: > On Tue, Nov 10, 2020 at 3:20 PM Kishon Vijay Abraham I <kishon@ti.com> wrote: >> On 10/11/20 7:55 am, Sherry Sun wrote: > >>> But for VOP, only two boards are needed(one board as host and one board as card) to realize the >>> communication between the two systems, so my question is what are the advantages of using NTB? >> >> NTB is a bridge that facilitates communication between two different >> systems. So it by itself will not be source or sink of any data unlike a >> normal EP to RP system (or the VOP) which will be source or sink of data. >> >>> Because I think the architecture of NTB seems more complicated. Many thanks! >> >> yeah, I think it enables a different use case all together. Consider you >> have two x86 HOST PCs (having RP) and they have to be communicate using >> PCIe. NTB can be used in such cases for the two x86 PCs to communicate >> with each other over PCIe, which wouldn't be possible without NTB. > > I think for VOP, we should have an abstraction that can work on either NTB > or directly on the endpoint framework but provide an interface that then > lets you create logical devices the same way. > > Doing VOP based on NTB plus the new NTB_EPF driver would also > work and just move the abstraction somewhere else, but I guess it > would complicate setting it up for those users that only care about the > simpler endpoint case. I'm not sure if you've got a chance to look at [1], where I added support for RP<->EP system both running Linux, with EP configured using Linux EP framework (as well as HOST ports connected to NTB switch, patches 20 and 21, that uses the Linux NTB framework) to communicate using virtio over PCIe. The cover-letter [1] shows a picture of the two use cases supported in that series. [1] -> http://lore.kernel.org/r/20200702082143.25259-1-kishon@ti.com Thank You, Kishon
Hi Kishon, > Subject: Re: [PATCH v7 15/18] NTB: Add support for EPF PCI-Express Non- > Transparent Bridge > > Hi Sherry, Arnd, > > On 10/11/20 8:29 pm, Arnd Bergmann wrote: > > On Tue, Nov 10, 2020 at 3:20 PM Kishon Vijay Abraham I <kishon@ti.com> > wrote: > >> On 10/11/20 7:55 am, Sherry Sun wrote: > > > >>> But for VOP, only two boards are needed(one board as host and one > >>> board as card) to realize the communication between the two systems, > so my question is what are the advantages of using NTB? > >> > >> NTB is a bridge that facilitates communication between two different > >> systems. So it by itself will not be source or sink of any data > >> unlike a normal EP to RP system (or the VOP) which will be source or sink > of data. > >> > >>> Because I think the architecture of NTB seems more complicated. Many > thanks! > >> > >> yeah, I think it enables a different use case all together. Consider > >> you have two x86 HOST PCs (having RP) and they have to be communicate > >> using PCIe. NTB can be used in such cases for the two x86 PCs to > >> communicate with each other over PCIe, which wouldn't be possible > without NTB. > > > > I think for VOP, we should have an abstraction that can work on either > > NTB or directly on the endpoint framework but provide an interface > > that then lets you create logical devices the same way. > > > > Doing VOP based on NTB plus the new NTB_EPF driver would also work and > > just move the abstraction somewhere else, but I guess it would > > complicate setting it up for those users that only care about the > > simpler endpoint case. > > I'm not sure if you've got a chance to look at [1], where I added support for > RP<->EP system both running Linux, with EP configured using Linux EP > framework (as well as HOST ports connected to NTB switch, patches 20 and > 21, that uses the Linux NTB framework) to communicate using virtio over > PCIe. > I saw your patches at [1], here you take a rpmsg as an example to communicate between two SoCs using PCIe RC<->EP and HOST1-NTB-HOST2 for different usercases. The VOP code works under the PCIe RC<->EP framework, which means that we can also make VOP works under the Linux NTB framework, just like the rpmsg way you did here, right? Best regards Sherry > The cover-letter [1] shows a picture of the two use cases supported in that > series. > > [1] -> > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flore.ke > rnel.org%2Fr%2F20200702082143.25259-1- > kishon%40ti.com&data=04%7C01%7Csherry.sun%40nxp.com%7C5d8b7 > 3a4b72947bea65d08d8858f5091%7C686ea1d3bc2b4c6fa92cd99c5c301635%7 > C0%7C0%7C637406197865119992%7CUnknown%7CTWFpbGZsb3d8eyJWIjoi > MC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C100 > 0&sdata=iRrBvQ9xjoOUYU%2FDidMLZZpW6XuU4ITVXFDA%2B%2F4rJFU > %3D&reserved=0 > > Thank You, > Kishon
Hi Sherry, On 11/11/20 8:19 am, Sherry Sun wrote: > Hi Kishon, > >> Subject: Re: [PATCH v7 15/18] NTB: Add support for EPF PCI-Express Non- >> Transparent Bridge >> >> Hi Sherry, Arnd, >> >> On 10/11/20 8:29 pm, Arnd Bergmann wrote: >>> On Tue, Nov 10, 2020 at 3:20 PM Kishon Vijay Abraham I <kishon@ti.com> >> wrote: >>>> On 10/11/20 7:55 am, Sherry Sun wrote: >>> >>>>> But for VOP, only two boards are needed(one board as host and one >>>>> board as card) to realize the communication between the two systems, >> so my question is what are the advantages of using NTB? >>>> >>>> NTB is a bridge that facilitates communication between two different >>>> systems. So it by itself will not be source or sink of any data >>>> unlike a normal EP to RP system (or the VOP) which will be source or sink >> of data. >>>> >>>>> Because I think the architecture of NTB seems more complicated. Many >> thanks! >>>> >>>> yeah, I think it enables a different use case all together. Consider >>>> you have two x86 HOST PCs (having RP) and they have to be communicate >>>> using PCIe. NTB can be used in such cases for the two x86 PCs to >>>> communicate with each other over PCIe, which wouldn't be possible >> without NTB. >>> >>> I think for VOP, we should have an abstraction that can work on either >>> NTB or directly on the endpoint framework but provide an interface >>> that then lets you create logical devices the same way. >>> >>> Doing VOP based on NTB plus the new NTB_EPF driver would also work and >>> just move the abstraction somewhere else, but I guess it would >>> complicate setting it up for those users that only care about the >>> simpler endpoint case. >> >> I'm not sure if you've got a chance to look at [1], where I added support for >> RP<->EP system both running Linux, with EP configured using Linux EP >> framework (as well as HOST ports connected to NTB switch, patches 20 and >> 21, that uses the Linux NTB framework) to communicate using virtio over >> PCIe. >> > > I saw your patches at [1], here you take a rpmsg as an example to communicate between > two SoCs using PCIe RC<->EP and HOST1-NTB-HOST2 for different usercases. > The VOP code works under the PCIe RC<->EP framework, which means that we can also > make VOP works under the Linux NTB framework, just like the rpmsg way you did here, right? Does VOP really work with EP framework? At-least whatever is in upstream doesn't seem to indicate so. The NTB framework lets one host with RP port to communicate with another host with RP port. The EP Framework lets one device with EP port to communicate with a host with RP port. Rest of the trick should be how you tie them together. PCIe framework creates "pci_device" for each of the devices it enumerates. NTB framework works on this pci_device to communicate with the remote host using PCIe bridge. The remote host will use NTB framework as well. So depends on what interfaces VOP device provides you can use either NTB framework or EP framework. If it's going to connect two different devices in turn creating pci_device on each of the systems, then you can use NTB framework. Regards Kishon
Hi Kishon, > Subject: Re: [PATCH v7 15/18] NTB: Add support for EPF PCI-Express Non- > Transparent Bridge > > Hi Sherry, > > On 11/11/20 8:19 am, Sherry Sun wrote: > > Hi Kishon, > > > >> Subject: Re: [PATCH v7 15/18] NTB: Add support for EPF PCI-Express > >> Non- Transparent Bridge > >> > >> Hi Sherry, Arnd, > >> > >> On 10/11/20 8:29 pm, Arnd Bergmann wrote: > >>> On Tue, Nov 10, 2020 at 3:20 PM Kishon Vijay Abraham I > >>> <kishon@ti.com> > >> wrote: > >>>> On 10/11/20 7:55 am, Sherry Sun wrote: > >>> > >>>>> But for VOP, only two boards are needed(one board as host and one > >>>>> board as card) to realize the communication between the two > >>>>> systems, > >> so my question is what are the advantages of using NTB? > >>>> > >>>> NTB is a bridge that facilitates communication between two > >>>> different systems. So it by itself will not be source or sink of > >>>> any data unlike a normal EP to RP system (or the VOP) which will be > >>>> source or sink > >> of data. > >>>> > >>>>> Because I think the architecture of NTB seems more complicated. > >>>>> Many > >> thanks! > >>>> > >>>> yeah, I think it enables a different use case all together. > >>>> Consider you have two x86 HOST PCs (having RP) and they have to be > >>>> communicate using PCIe. NTB can be used in such cases for the two > >>>> x86 PCs to communicate with each other over PCIe, which wouldn't be > >>>> possible > >> without NTB. > >>> > >>> I think for VOP, we should have an abstraction that can work on > >>> either NTB or directly on the endpoint framework but provide an > >>> interface that then lets you create logical devices the same way. > >>> > >>> Doing VOP based on NTB plus the new NTB_EPF driver would also work > >>> and just move the abstraction somewhere else, but I guess it would > >>> complicate setting it up for those users that only care about the > >>> simpler endpoint case. > >> > >> I'm not sure if you've got a chance to look at [1], where I added > >> support for RP<->EP system both running Linux, with EP configured > >> using Linux EP framework (as well as HOST ports connected to NTB > >> switch, patches 20 and 21, that uses the Linux NTB framework) to > >> communicate using virtio over PCIe. > >> > > > > I saw your patches at [1], here you take a rpmsg as an example to > > communicate between two SoCs using PCIe RC<->EP and HOST1-NTB- > HOST2 for different usercases. > > The VOP code works under the PCIe RC<->EP framework, which means that > > we can also make VOP works under the Linux NTB framework, just like the > rpmsg way you did here, right? > > Does VOP really work with EP framework? At-least whatever is in upstream > doesn't seem to indicate so. > We did write a pci_epf driver to support VOP, looks like pci-epf-test.c, and it works well. So certainly VOP can work with EP framework. But it's a pity that the VOP related codes has been deleted before we send the pci_epf_vop driver patches to upstream. > The NTB framework lets one host with RP port to communicate with another > host with RP port. > > The EP Framework lets one device with EP port to communicate with a host > with RP port. > > Rest of the trick should be how you tie them together. > > PCIe framework creates "pci_device" for each of the devices it enumerates. > NTB framework works on this pci_device to communicate with the remote > host using PCIe bridge. The remote host will use NTB framework as well. > > So depends on what interfaces VOP device provides you can use either NTB > framework or EP framework. If it's going to connect two different devices in > turn creating pci_device on each of the systems, then you can use NTB > framework. > Thanks for your detailed explanation! It is clear. I think maybe VOP is suitable for the basic PCIe framework instead of NTB. Best regards Sherry > Regards > Kishon
On Tue, Nov 10, 2020 at 4:42 PM Kishon Vijay Abraham I <kishon@ti.com> wrote: > On 10/11/20 8:29 pm, Arnd Bergmann wrote: > > On Tue, Nov 10, 2020 at 3:20 PM Kishon Vijay Abraham I <kishon@ti.com> wrote: > >> On 10/11/20 7:55 am, Sherry Sun wrote: > > > >>> But for VOP, only two boards are needed(one board as host and one board as card) to realize the > >>> communication between the two systems, so my question is what are the advantages of using NTB? > >> > >> NTB is a bridge that facilitates communication between two different > >> systems. So it by itself will not be source or sink of any data unlike a > >> normal EP to RP system (or the VOP) which will be source or sink of data. > >> > >>> Because I think the architecture of NTB seems more complicated. Many thanks! > >> > >> yeah, I think it enables a different use case all together. Consider you > >> have two x86 HOST PCs (having RP) and they have to be communicate using > >> PCIe. NTB can be used in such cases for the two x86 PCs to communicate > >> with each other over PCIe, which wouldn't be possible without NTB. > > > > I think for VOP, we should have an abstraction that can work on either NTB > > or directly on the endpoint framework but provide an interface that then > > lets you create logical devices the same way. > > > > Doing VOP based on NTB plus the new NTB_EPF driver would also > > work and just move the abstraction somewhere else, but I guess it > > would complicate setting it up for those users that only care about the > > simpler endpoint case. > > I'm not sure if you've got a chance to look at [1], where I added > support for RP<->EP system both running Linux, with EP configured using > Linux EP framework (as well as HOST ports connected to NTB switch, > patches 20 and 21, that uses the Linux NTB framework) to communicate > using virtio over PCIe. > > The cover-letter [1] shows a picture of the two use cases supported in > that series. > > [1] -> http://lore.kernel.org/r/20200702082143.25259-1-kishon@ti.com No, I missed, that, thanks for pointing me to it! This looks very promising indeed, I need to read up on the whole discussion there. I also see your slides at [1] that help do explain some of it. I have one fundamental question that I can't figure out from the description, maybe you can help me here: How is the configuration managed, taking the EP case as an example? Your UseCase1 example sounds like the system that owns the EP hardware is the one that turns the EP into a vhost device, and creates a vhost-rpmsg device on top, while the RC side would probe the pci-vhost and then detect a virtio-rpmsg device to talk to. Can it also do the opposite, so you end up with e.g. a virtio-net device on the EP side and vhost-net on the RC? Arnd [1] https://linuxplumbersconf.org/event/7/contributions/849/attachments/642/1175/Virtio_for_PCIe_RC_EP_NTB.pdf
Hi Arnd, On 12/11/20 6:54 pm, Arnd Bergmann wrote: > On Tue, Nov 10, 2020 at 4:42 PM Kishon Vijay Abraham I <kishon@ti.com> wrote: >> On 10/11/20 8:29 pm, Arnd Bergmann wrote: >>> On Tue, Nov 10, 2020 at 3:20 PM Kishon Vijay Abraham I <kishon@ti.com> wrote: >>>> On 10/11/20 7:55 am, Sherry Sun wrote: >>> >>>>> But for VOP, only two boards are needed(one board as host and one board as card) to realize the >>>>> communication between the two systems, so my question is what are the advantages of using NTB? >>>> >>>> NTB is a bridge that facilitates communication between two different >>>> systems. So it by itself will not be source or sink of any data unlike a >>>> normal EP to RP system (or the VOP) which will be source or sink of data. >>>> >>>>> Because I think the architecture of NTB seems more complicated. Many thanks! >>>> >>>> yeah, I think it enables a different use case all together. Consider you >>>> have two x86 HOST PCs (having RP) and they have to be communicate using >>>> PCIe. NTB can be used in such cases for the two x86 PCs to communicate >>>> with each other over PCIe, which wouldn't be possible without NTB. >>> >>> I think for VOP, we should have an abstraction that can work on either NTB >>> or directly on the endpoint framework but provide an interface that then >>> lets you create logical devices the same way. >>> >>> Doing VOP based on NTB plus the new NTB_EPF driver would also >>> work and just move the abstraction somewhere else, but I guess it >>> would complicate setting it up for those users that only care about the >>> simpler endpoint case. >> >> I'm not sure if you've got a chance to look at [1], where I added >> support for RP<->EP system both running Linux, with EP configured using >> Linux EP framework (as well as HOST ports connected to NTB switch, >> patches 20 and 21, that uses the Linux NTB framework) to communicate >> using virtio over PCIe. >> >> The cover-letter [1] shows a picture of the two use cases supported in >> that series. >> >> [1] -> http://lore.kernel.org/r/20200702082143.25259-1-kishon@ti.com > > No, I missed, that, thanks for pointing me to it! > > This looks very promising indeed, I need to read up on the whole > discussion there. I also see your slides at [1] that help do explain some > of it. I have one fundamental question that I can't figure out from > the description, maybe you can help me here: > > How is the configuration managed, taking the EP case as an > example? Your UseCase1 example sounds like the system that owns > the EP hardware is the one that turns the EP into a vhost device, > and creates a vhost-rpmsg device on top, while the RC side would > probe the pci-vhost and then detect a virtio-rpmsg device to talk to. That's correct. Slide no 9 in [1] should give the layering details. > Can it also do the opposite, so you end up with e.g. a virtio-net > device on the EP side and vhost-net on the RC? Unfortunately no. Again referring slide 9 in [1], we only have vhost-pci-epf on the EP side which only creates a "vhost_dev" to deal with vhost side of things. For doing the opposite, we'd need to create virtio-pci-epf for EP side that interacts with core virtio (and also the corresponding vhost back end on PCI host). Thanks Kishon > > Arnd > > [1] https://linuxplumbersconf.org/event/7/contributions/849/attachments/642/1175/Virtio_for_PCIe_RC_EP_NTB.pdf >
On Mon, Nov 16, 2020 at 6:19 AM Kishon Vijay Abraham I <kishon@ti.com> wrote: > On 12/11/20 6:54 pm, Arnd Bergmann wrote: > > > > This looks very promising indeed, I need to read up on the whole > > discussion there. I also see your slides at [1] that help do explain some > > of it. I have one fundamental question that I can't figure out from > > the description, maybe you can help me here: > > > > How is the configuration managed, taking the EP case as an > > example? Your UseCase1 example sounds like the system that owns > > the EP hardware is the one that turns the EP into a vhost device, > > and creates a vhost-rpmsg device on top, while the RC side would > > probe the pci-vhost and then detect a virtio-rpmsg device to talk to. > > That's correct. Slide no 9 in [1] should give the layering details. > > > Can it also do the opposite, so you end up with e.g. a virtio-net > > device on the EP side and vhost-net on the RC? > > Unfortunately no. Again referring slide 9 in [1], we only have > vhost-pci-epf on the EP side which only creates a "vhost_dev" to deal > with vhost side of things. For doing the opposite, we'd need to create > virtio-pci-epf for EP side that interacts with core virtio (and also the > corresponding vhost back end on PCI host). Ok, I see. So I think this is the opposite of drivers/misc/mic and the bluefield driver were using, so we would probably end up needing both. Then again, I guess the NTB driver would give us the functionality for free, if it shows a symmetric link? Arnd
Hi Arnd, On 16/11/20 9:07 pm, Arnd Bergmann wrote: > On Mon, Nov 16, 2020 at 6:19 AM Kishon Vijay Abraham I <kishon@ti.com> wrote: >> On 12/11/20 6:54 pm, Arnd Bergmann wrote: >>> >>> This looks very promising indeed, I need to read up on the whole >>> discussion there. I also see your slides at [1] that help do explain some >>> of it. I have one fundamental question that I can't figure out from >>> the description, maybe you can help me here: >>> >>> How is the configuration managed, taking the EP case as an >>> example? Your UseCase1 example sounds like the system that owns >>> the EP hardware is the one that turns the EP into a vhost device, >>> and creates a vhost-rpmsg device on top, while the RC side would >>> probe the pci-vhost and then detect a virtio-rpmsg device to talk to. >> >> That's correct. Slide no 9 in [1] should give the layering details. >> >>> Can it also do the opposite, so you end up with e.g. a virtio-net >>> device on the EP side and vhost-net on the RC? >> >> Unfortunately no. Again referring slide 9 in [1], we only have >> vhost-pci-epf on the EP side which only creates a "vhost_dev" to deal >> with vhost side of things. For doing the opposite, we'd need to create >> virtio-pci-epf for EP side that interacts with core virtio (and also the >> corresponding vhost back end on PCI host). > > Ok, I see. So I think this is the opposite of drivers/misc/mic and > the bluefield driver were using, so we would probably end up > needing both. > > Then again, I guess the NTB driver would give us the functionality > for free, if it shows a symmetric link? Right, NTB driver would need "pci_dev" on both sides of the link. But that would also mean we cannot use pci EP framework which actually uses "pci_epf". Thanks Kishon
diff --git a/drivers/ntb/hw/Kconfig b/drivers/ntb/hw/Kconfig index e77c587060ff..c325be526b80 100644 --- a/drivers/ntb/hw/Kconfig +++ b/drivers/ntb/hw/Kconfig @@ -2,4 +2,5 @@ source "drivers/ntb/hw/amd/Kconfig" source "drivers/ntb/hw/idt/Kconfig" source "drivers/ntb/hw/intel/Kconfig" +source "drivers/ntb/hw/epf/Kconfig" source "drivers/ntb/hw/mscc/Kconfig" diff --git a/drivers/ntb/hw/Makefile b/drivers/ntb/hw/Makefile index 4714d6238845..223ca592b5f9 100644 --- a/drivers/ntb/hw/Makefile +++ b/drivers/ntb/hw/Makefile @@ -2,4 +2,5 @@ obj-$(CONFIG_NTB_AMD) += amd/ obj-$(CONFIG_NTB_IDT) += idt/ obj-$(CONFIG_NTB_INTEL) += intel/ +obj-$(CONFIG_NTB_EPF) += epf/ obj-$(CONFIG_NTB_SWITCHTEC) += mscc/ diff --git a/drivers/ntb/hw/epf/Kconfig b/drivers/ntb/hw/epf/Kconfig new file mode 100644 index 000000000000..6197d1aab344 --- /dev/null +++ b/drivers/ntb/hw/epf/Kconfig @@ -0,0 +1,6 @@ +config NTB_EPF + tristate "Generic EPF Non-Transparent Bridge support" + depends on m + help + This driver supports EPF NTB on configurable endpoint. + If unsure, say N. diff --git a/drivers/ntb/hw/epf/Makefile b/drivers/ntb/hw/epf/Makefile new file mode 100644 index 000000000000..2f560a422bc6 --- /dev/null +++ b/drivers/ntb/hw/epf/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_NTB_EPF) += ntb_hw_epf.o diff --git a/drivers/ntb/hw/epf/ntb_hw_epf.c b/drivers/ntb/hw/epf/ntb_hw_epf.c new file mode 100644 index 000000000000..0a144987851a --- /dev/null +++ b/drivers/ntb/hw/epf/ntb_hw_epf.c @@ -0,0 +1,755 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * Host side endpoint driver to implement Non-Transparent Bridge functionality + * + * Copyright (C) 2020 Texas Instruments + * Author: Kishon Vijay Abraham I <kishon@ti.com> + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/ntb.h> + +#define NTB_EPF_COMMAND 0x0 +#define CMD_CONFIGURE_DOORBELL 1 +#define CMD_TEARDOWN_DOORBELL 2 +#define CMD_CONFIGURE_MW 3 +#define CMD_TEARDOWN_MW 4 +#define CMD_LINK_UP 5 +#define CMD_LINK_DOWN 6 + +#define NTB_EPF_ARGUMENT 0x4 +#define MSIX_ENABLE BIT(16) + +#define NTB_EPF_CMD_STATUS 0x8 +#define COMMAND_STATUS_OK 1 +#define COMMAND_STATUS_ERROR 2 + +#define NTB_EPF_LINK_STATUS 0x0A +#define LINK_STATUS_UP BIT(0) + +#define NTB_EPF_TOPOLOGY 0x0C +#define NTB_EPF_LOWER_ADDR 0x10 +#define NTB_EPF_UPPER_ADDR 0x14 +#define NTB_EPF_LOWER_SIZE 0x18 +#define NTB_EPF_UPPER_SIZE 0x1C +#define NTB_EPF_MW_COUNT 0x20 +#define NTB_EPF_MW1_OFFSET 0x24 +#define NTB_EPF_SPAD_OFFSET 0x28 +#define NTB_EPF_SPAD_COUNT 0x2C +#define NTB_EPF_DB_ENTRY_SIZE 0x30 +#define NTB_EPF_DB_DATA(n) (0x34 + (n) * 4) +#define NTB_EPF_DB_OFFSET(n) (0xB4 + (n) * 4) + +#define NTB_EPF_MIN_DB_COUNT 3 +#define NTB_EPF_MAX_DB_COUNT 31 +#define NTB_EPF_MW_OFFSET 2 + +#define NTB_EPF_COMMAND_TIMEOUT 1000 /* 1 Sec */ + +enum pci_barno { + BAR_0, + BAR_1, + BAR_2, + BAR_3, + BAR_4, + BAR_5, +}; + +struct ntb_epf_dev { + struct ntb_dev ntb; + struct device *dev; + /* Mutex to protect providing commands to NTB EPF */ + struct mutex cmd_lock; + + enum pci_barno ctrl_reg_bar; + enum pci_barno peer_spad_reg_bar; + enum pci_barno db_reg_bar; + + unsigned int mw_count; + unsigned int spad_count; + unsigned int db_count; + + void __iomem *ctrl_reg; + void __iomem *db_reg; + void __iomem *peer_spad_reg; + + unsigned int self_spad; + unsigned int peer_spad; + + int db_val; + u64 db_valid_mask; +}; + +#define ntb_ndev(__ntb) container_of(__ntb, struct ntb_epf_dev, ntb) + +struct ntb_epf_data { + /* BAR that contains both control region and self spad region */ + enum pci_barno ctrl_reg_bar; + /* BAR that contains peer spad region */ + enum pci_barno peer_spad_reg_bar; + /* BAR that contains Doorbell region and Memory window '1' */ + enum pci_barno db_reg_bar; +}; + +static int ntb_epf_send_command(struct ntb_epf_dev *ndev, u32 command, + u32 argument) +{ + ktime_t timeout; + bool timedout; + int ret = 0; + u32 status; + + mutex_lock(&ndev->cmd_lock); + writel(argument, ndev->ctrl_reg + NTB_EPF_ARGUMENT); + writel(command, ndev->ctrl_reg + NTB_EPF_COMMAND); + + timeout = ktime_add_ms(ktime_get(), NTB_EPF_COMMAND_TIMEOUT); + while (1) { + timedout = ktime_after(ktime_get(), timeout); + status = readw(ndev->ctrl_reg + NTB_EPF_CMD_STATUS); + + if (status == COMMAND_STATUS_ERROR) { + ret = -EINVAL; + break; + } + + if (status == COMMAND_STATUS_OK) + break; + + if (WARN_ON(timedout)) { + ret = -ETIMEDOUT; + break; + } + + usleep_range(5, 10); + } + + writew(0, ndev->ctrl_reg + NTB_EPF_CMD_STATUS); + mutex_unlock(&ndev->cmd_lock); + + return ret; +} + +static int ntb_epf_mw_to_bar(struct ntb_epf_dev *ndev, int idx) +{ + struct device *dev = ndev->dev; + + if (idx < 0 || idx > ndev->mw_count) { + dev_err(dev, "Unsupported Memory Window index %d\n", idx); + return -EINVAL; + } + + return idx + 2; +} + +static int ntb_epf_mw_count(struct ntb_dev *ntb, int pidx) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + + if (pidx != NTB_DEF_PEER_IDX) { + dev_err(dev, "Unsupported Peer ID %d\n", pidx); + return -EINVAL; + } + + return ndev->mw_count; +} + +static int ntb_epf_mw_get_align(struct ntb_dev *ntb, int pidx, int idx, + resource_size_t *addr_align, + resource_size_t *size_align, + resource_size_t *size_max) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + int bar; + + if (pidx != NTB_DEF_PEER_IDX) { + dev_err(dev, "Unsupported Peer ID %d\n", pidx); + return -EINVAL; + } + + bar = ntb_epf_mw_to_bar(ndev, idx); + if (bar < 0) + return bar; + + if (addr_align) + *addr_align = SZ_4K; + + if (size_align) + *size_align = 1; + + if (size_max) + *size_max = pci_resource_len(ndev->ntb.pdev, bar); + + return 0; +} + +static u64 ntb_epf_link_is_up(struct ntb_dev *ntb, + enum ntb_speed *speed, + enum ntb_width *width) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + u32 status; + + status = readw(ndev->ctrl_reg + NTB_EPF_LINK_STATUS); + + return status & LINK_STATUS_UP; +} + +static u32 ntb_epf_spad_read(struct ntb_dev *ntb, int idx) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + u32 offset; + + if (idx < 0 || idx >= ndev->spad_count) { + dev_err(dev, "READ: Invalid ScratchPad Index %d\n", idx); + return 0; + } + + offset = readl(ndev->ctrl_reg + NTB_EPF_SPAD_OFFSET); + offset += (idx << 2); + + return readl(ndev->ctrl_reg + offset); +} + +static int ntb_epf_spad_write(struct ntb_dev *ntb, + int idx, u32 val) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + u32 offset; + + if (idx < 0 || idx >= ndev->spad_count) { + dev_err(dev, "WRITE: Invalid ScratchPad Index %d\n", idx); + return -EINVAL; + } + + offset = readl(ndev->ctrl_reg + NTB_EPF_SPAD_OFFSET); + offset += (idx << 2); + writel(val, ndev->ctrl_reg + offset); + + return 0; +} + +static u32 ntb_epf_peer_spad_read(struct ntb_dev *ntb, int pidx, int idx) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + u32 offset; + + if (pidx != NTB_DEF_PEER_IDX) { + dev_err(dev, "Unsupported Peer ID %d\n", pidx); + return -EINVAL; + } + + if (idx < 0 || idx >= ndev->spad_count) { + dev_err(dev, "WRITE: Invalid Peer ScratchPad Index %d\n", idx); + return -EINVAL; + } + + offset = (idx << 2); + return readl(ndev->peer_spad_reg + offset); +} + +static int ntb_epf_peer_spad_write(struct ntb_dev *ntb, int pidx, + int idx, u32 val) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + u32 offset; + + if (pidx != NTB_DEF_PEER_IDX) { + dev_err(dev, "Unsupported Peer ID %d\n", pidx); + return -EINVAL; + } + + if (idx < 0 || idx >= ndev->spad_count) { + dev_err(dev, "WRITE: Invalid Peer ScratchPad Index %d\n", idx); + return -EINVAL; + } + + offset = (idx << 2); + writel(val, ndev->peer_spad_reg + offset); + + return 0; +} + +static int ntb_epf_link_enable(struct ntb_dev *ntb, + enum ntb_speed max_speed, + enum ntb_width max_width) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + int ret; + + ret = ntb_epf_send_command(ndev, CMD_LINK_UP, 0); + if (ret) { + dev_err(dev, "Fail to enable link\n"); + return ret; + } + + return 0; +} + +static int ntb_epf_link_disable(struct ntb_dev *ntb) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + int ret; + + ret = ntb_epf_send_command(ndev, CMD_LINK_DOWN, 0); + if (ret) { + dev_err(dev, "Fail to disable link\n"); + return ret; + } + + return 0; +} + +static irqreturn_t ntb_epf_vec_isr(int irq, void *dev) +{ + struct ntb_epf_dev *ndev = dev; + int irq_no; + + irq_no = irq - pci_irq_vector(ndev->ntb.pdev, 0); + ndev->db_val = irq_no + 1; + + if (irq_no == 0) + ntb_link_event(&ndev->ntb); + else + ntb_db_event(&ndev->ntb, irq_no); + + return IRQ_HANDLED; +} + +static int ntb_epf_init_isr(struct ntb_epf_dev *ndev, int msi_min, int msi_max) +{ + struct pci_dev *pdev = ndev->ntb.pdev; + struct device *dev = ndev->dev; + u32 argument = MSIX_ENABLE; + int irq; + int ret; + int i; + + irq = pci_alloc_irq_vectors(pdev, msi_min, msi_max, PCI_IRQ_MSIX); + if (irq < 0) { + dev_dbg(dev, "Failed to get MSIX interrupts\n"); + irq = pci_alloc_irq_vectors(pdev, msi_min, msi_max, + PCI_IRQ_MSI); + if (irq < 0) { + dev_err(dev, "Failed to get MSI interrupts\n"); + return irq; + } + argument &= ~MSIX_ENABLE; + } + + for (i = 0; i < irq; i++) { + ret = devm_request_irq(&pdev->dev, pci_irq_vector(pdev, i), + ntb_epf_vec_isr, 0, "ntb_epf", ndev); + if (ret) { + dev_err(dev, "Failed to request irq\n"); + goto err_request_irq; + } + } + + ndev->db_count = irq - 1; + + ret = ntb_epf_send_command(ndev, CMD_CONFIGURE_DOORBELL, + argument | irq); + if (ret) { + dev_err(dev, "Failed to configure doorbell\n"); + goto err_configure_db; + } + + return 0; + +err_configure_db: + for (i = 0; i < ndev->db_count + 1; i++) + devm_free_irq(dev, pci_irq_vector(pdev, i), ndev); + +err_request_irq: + pci_free_irq_vectors(pdev); + + return ret; +} + +static int ntb_epf_peer_mw_count(struct ntb_dev *ntb) +{ + return ntb_ndev(ntb)->mw_count; +} + +static int ntb_epf_spad_count(struct ntb_dev *ntb) +{ + return ntb_ndev(ntb)->spad_count; +} + +static u64 ntb_epf_db_valid_mask(struct ntb_dev *ntb) +{ + return ntb_ndev(ntb)->db_valid_mask; +} + +static int ntb_epf_db_set_mask(struct ntb_dev *ntb, u64 db_bits) +{ + return 0; +} + +static int ntb_epf_mw_set_trans(struct ntb_dev *ntb, int pidx, int idx, + dma_addr_t addr, resource_size_t size) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + resource_size_t mw_size; + int bar; + + if (pidx != NTB_DEF_PEER_IDX) { + dev_err(dev, "Unsupported Peer ID %d\n", pidx); + return -EINVAL; + } + + bar = idx + NTB_EPF_MW_OFFSET; + + mw_size = pci_resource_len(ntb->pdev, bar); + + if (size > mw_size) { + dev_err(dev, "Size:%pa is greater than the MW size %pa\n", + &size, &mw_size); + return -EINVAL; + } + + writel(lower_32_bits(addr), ndev->ctrl_reg + NTB_EPF_LOWER_ADDR); + writel(upper_32_bits(addr), ndev->ctrl_reg + NTB_EPF_UPPER_ADDR); + writel(lower_32_bits(size), ndev->ctrl_reg + NTB_EPF_LOWER_SIZE); + writel(upper_32_bits(size), ndev->ctrl_reg + NTB_EPF_UPPER_SIZE); + ntb_epf_send_command(ndev, CMD_CONFIGURE_MW, idx); + + return 0; +} + +static int ntb_epf_mw_clear_trans(struct ntb_dev *ntb, int pidx, int idx) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + int ret = 0; + + ntb_epf_send_command(ndev, CMD_TEARDOWN_MW, idx); + if (ret) + dev_err(dev, "Failed to teardown memory window\n"); + + return ret; +} + +static int ntb_epf_peer_mw_get_addr(struct ntb_dev *ntb, int idx, + phys_addr_t *base, resource_size_t *size) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + u32 offset = 0; + int bar; + + if (idx == 0) + offset = readl(ndev->ctrl_reg + NTB_EPF_MW1_OFFSET); + + bar = idx + NTB_EPF_MW_OFFSET; + + if (base) + *base = pci_resource_start(ndev->ntb.pdev, bar) + offset; + + if (size) + *size = pci_resource_len(ndev->ntb.pdev, bar) - offset; + + return 0; +} + +static int ntb_epf_peer_db_set(struct ntb_dev *ntb, u64 db_bits) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + u32 interrupt_num = ffs(db_bits) + 1; + struct device *dev = ndev->dev; + u32 db_entry_size; + u32 db_offset; + u32 db_data; + + if (interrupt_num > ndev->db_count) { + dev_err(dev, "DB interrupt %d greater than Max Supported %d\n", + interrupt_num, ndev->db_count); + return -EINVAL; + } + + db_entry_size = readl(ndev->ctrl_reg + NTB_EPF_DB_ENTRY_SIZE); + + db_data = readl(ndev->ctrl_reg + NTB_EPF_DB_DATA(interrupt_num)); + db_offset = readl(ndev->ctrl_reg + NTB_EPF_DB_OFFSET(interrupt_num)); + writel(db_data, ndev->db_reg + (db_entry_size * interrupt_num) + + db_offset); + + return 0; +} + +static u64 ntb_epf_db_read(struct ntb_dev *ntb) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + + return ndev->db_val; +} + +static int ntb_epf_db_clear_mask(struct ntb_dev *ntb, u64 db_bits) +{ + return 0; +} + +static int ntb_epf_db_clear(struct ntb_dev *ntb, u64 db_bits) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + + ndev->db_val = 0; + + return 0; +} + +static const struct ntb_dev_ops ntb_epf_ops = { + .mw_count = ntb_epf_mw_count, + .spad_count = ntb_epf_spad_count, + .peer_mw_count = ntb_epf_peer_mw_count, + .db_valid_mask = ntb_epf_db_valid_mask, + .db_set_mask = ntb_epf_db_set_mask, + .mw_set_trans = ntb_epf_mw_set_trans, + .mw_clear_trans = ntb_epf_mw_clear_trans, + .peer_mw_get_addr = ntb_epf_peer_mw_get_addr, + .link_enable = ntb_epf_link_enable, + .spad_read = ntb_epf_spad_read, + .spad_write = ntb_epf_spad_write, + .peer_spad_read = ntb_epf_peer_spad_read, + .peer_spad_write = ntb_epf_peer_spad_write, + .peer_db_set = ntb_epf_peer_db_set, + .db_read = ntb_epf_db_read, + .mw_get_align = ntb_epf_mw_get_align, + .link_is_up = ntb_epf_link_is_up, + .db_clear_mask = ntb_epf_db_clear_mask, + .db_clear = ntb_epf_db_clear, + .link_disable = ntb_epf_link_disable, +}; + +static inline void ntb_epf_init_struct(struct ntb_epf_dev *ndev, + struct pci_dev *pdev) +{ + ndev->ntb.pdev = pdev; + ndev->ntb.topo = NTB_TOPO_NONE; + ndev->ntb.ops = &ntb_epf_ops; +} + +static int ntb_epf_init_dev(struct ntb_epf_dev *ndev) +{ + struct device *dev = ndev->dev; + int ret; + + /* One Link interrupt and rest doorbell interrupt */ + ret = ntb_epf_init_isr(ndev, NTB_EPF_MIN_DB_COUNT + 1, + NTB_EPF_MAX_DB_COUNT + 1); + if (ret) { + dev_err(dev, "Failed to init ISR\n"); + return ret; + } + + ndev->db_valid_mask = BIT_ULL(ndev->db_count) - 1; + ndev->mw_count = readl(ndev->ctrl_reg + NTB_EPF_MW_COUNT); + ndev->spad_count = readl(ndev->ctrl_reg + NTB_EPF_SPAD_COUNT); + + return 0; +} + +static int ntb_epf_init_pci(struct ntb_epf_dev *ndev, + struct pci_dev *pdev) +{ + struct device *dev = ndev->dev; + int ret; + + pci_set_drvdata(pdev, ndev); + + ret = pci_enable_device(pdev); + if (ret) { + dev_err(dev, "Cannot enable PCI device\n"); + goto err_pci_enable; + } + + ret = pci_request_regions(pdev, "ntb"); + if (ret) { + dev_err(dev, "Cannot obtain PCI resources\n"); + goto err_pci_regions; + } + + pci_set_master(pdev); + + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)); + if (ret) { + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)); + if (ret) { + dev_err(dev, "Cannot set DMA mask\n"); + goto err_dma_mask; + } + dev_warn(&pdev->dev, "Cannot DMA highmem\n"); + } + + ndev->ctrl_reg = pci_iomap(pdev, 0, 0); + if (!ndev->ctrl_reg) { + ret = -EIO; + goto err_dma_mask; + } + + ndev->peer_spad_reg = pci_iomap(pdev, 1, 0); + if (!ndev->peer_spad_reg) { + ret = -EIO; + goto err_dma_mask; + } + + ndev->db_reg = pci_iomap(pdev, 2, 0); + if (!ndev->db_reg) { + ret = -EIO; + goto err_dma_mask; + } + + return 0; + +err_dma_mask: + pci_clear_master(pdev); + +err_pci_regions: + pci_disable_device(pdev); + +err_pci_enable: + pci_set_drvdata(pdev, NULL); + + return ret; +} + +static void ntb_epf_deinit_pci(struct ntb_epf_dev *ndev) +{ + struct pci_dev *pdev = ndev->ntb.pdev; + + pci_iounmap(pdev, ndev->ctrl_reg); + pci_iounmap(pdev, ndev->peer_spad_reg); + pci_iounmap(pdev, ndev->db_reg); + + pci_clear_master(pdev); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); +} + +static void ntb_epf_cleanup_isr(struct ntb_epf_dev *ndev) +{ + struct pci_dev *pdev = ndev->ntb.pdev; + struct device *dev = &pdev->dev; + int i; + + ntb_epf_send_command(ndev, CMD_TEARDOWN_DOORBELL, ndev->db_count + 1); + + for (i = 0; i < ndev->db_count + 1; i++) + devm_free_irq(dev, pci_irq_vector(pdev, i), ndev); + pci_free_irq_vectors(pdev); +} + +static int ntb_epf_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + enum pci_barno peer_spad_reg_bar = BAR_1; + enum pci_barno ctrl_reg_bar = BAR_0; + enum pci_barno db_reg_bar = BAR_2; + struct device *dev = &pdev->dev; + struct ntb_epf_data *data; + struct ntb_epf_dev *ndev; + int ret; + + if (pci_is_bridge(pdev)) + return -ENODEV; + + ndev = devm_kzalloc(dev, sizeof(*ndev), GFP_KERNEL); + if (!ndev) + return -ENOMEM; + + data = (struct ntb_epf_data *)id->driver_data; + if (data) { + if (data->peer_spad_reg_bar) + peer_spad_reg_bar = data->peer_spad_reg_bar; + if (data->ctrl_reg_bar) + ctrl_reg_bar = data->ctrl_reg_bar; + if (data->db_reg_bar) + db_reg_bar = data->db_reg_bar; + } + + ndev->peer_spad_reg_bar = peer_spad_reg_bar; + ndev->ctrl_reg_bar = ctrl_reg_bar; + ndev->db_reg_bar = db_reg_bar; + ndev->dev = dev; + + ntb_epf_init_struct(ndev, pdev); + mutex_init(&ndev->cmd_lock); + + ret = ntb_epf_init_pci(ndev, pdev); + if (ret) { + dev_err(dev, "Failed to init PCI\n"); + return ret; + } + + ret = ntb_epf_init_dev(ndev); + if (ret) { + dev_err(dev, "Failed to init device\n"); + goto err_init_dev; + } + + ret = ntb_register_device(&ndev->ntb); + if (ret) { + dev_err(dev, "Failed to register NTB device\n"); + goto err_register_dev; + } + + return 0; + +err_register_dev: + ntb_epf_cleanup_isr(ndev); + +err_init_dev: + ntb_epf_deinit_pci(ndev); + + return ret; +} + +static void ntb_epf_pci_remove(struct pci_dev *pdev) +{ + struct ntb_epf_dev *ndev = pci_get_drvdata(pdev); + + ntb_unregister_device(&ndev->ntb); + ntb_epf_cleanup_isr(ndev); + ntb_epf_deinit_pci(ndev); + kfree(ndev); +} + +static const struct ntb_epf_data j721e_data = { + .ctrl_reg_bar = BAR_0, + .peer_spad_reg_bar = BAR_1, + .db_reg_bar = BAR_2, +}; + +static const struct pci_device_id ntb_epf_pci_tbl[] = { + { + PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_J721E), + .class = PCI_CLASS_MEMORY_RAM << 8, .class_mask = 0xffff00, + .driver_data = (kernel_ulong_t)&j721e_data, + }, + { }, +}; + +static struct pci_driver ntb_epf_pci_driver = { + .name = KBUILD_MODNAME, + .id_table = ntb_epf_pci_tbl, + .probe = ntb_epf_pci_probe, + .remove = ntb_epf_pci_remove, +}; +module_pci_driver(ntb_epf_pci_driver); + +MODULE_DESCRIPTION("PCI ENDPOINT NTB HOST DRIVER"); +MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>"); +MODULE_LICENSE("GPL v2");
Add support for EPF PCI-Express Non-Transparent Bridge (NTB) device. This driver is platform independent and could be used by any platform which have multiple PCIe endpoint instances configured using the pci-epf-ntb driver. The driver connnects to the standard NTB sub-system interface. The EPF NTB device has configurable number of memory windows (Max 4), configurable number of doorbell (Max 32), and configurable number of scratch-pad registers. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- drivers/ntb/hw/Kconfig | 1 + drivers/ntb/hw/Makefile | 1 + drivers/ntb/hw/epf/Kconfig | 6 + drivers/ntb/hw/epf/Makefile | 1 + drivers/ntb/hw/epf/ntb_hw_epf.c | 755 ++++++++++++++++++++++++++++++++ 5 files changed, 764 insertions(+) create mode 100644 drivers/ntb/hw/epf/Kconfig create mode 100644 drivers/ntb/hw/epf/Makefile create mode 100644 drivers/ntb/hw/epf/ntb_hw_epf.c