From patchwork Mon Mar 30 11:42:27 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jiaxun Yang X-Patchwork-Id: 1263904 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=flygoat.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=flygoat.com header.i=jiaxun.yang@flygoat.com header.a=rsa-sha256 header.s=mail header.b=MPo8AtwT; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 48rVxw66x4z9sRN for ; Mon, 30 Mar 2020 22:45:08 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729954AbgC3LpD (ORCPT ); Mon, 30 Mar 2020 07:45:03 -0400 Received: from sender3-op-o12.zoho.com.cn ([124.251.121.243]:17892 "EHLO sender3-op-o12.zoho.com.cn" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729880AbgC3LpD (ORCPT ); Mon, 30 Mar 2020 07:45:03 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; t=1585568633; s=mail; d=flygoat.com; i=jiaxun.yang@flygoat.com; h=From:To:Cc:Message-ID:Subject:Date:In-Reply-To:References:MIME-Version:Content-Transfer-Encoding:Content-Type; bh=GXfXAYVjCPbD+Vg/eJrSJpRh2VNa+H9VCUBDSBVvbLo=; b=MPo8AtwTL9ZZxu0eFKcBB16ZcZm/1DxyyffhQYkAbkJcpBQ9b6TodD45HRqP/HoC /5no5QlBuXo7OT7C/PUe2klXWj+nX3hj8PYiVOMykWZabtUCAnSDmrcjERZ+x0rvgCP FA+lBTd1TntZSdL+sTCkLhxF4/CYPeTKoAUXJ+NY= Received: from localhost.localdomain (39.155.141.144 [39.155.141.144]) by mx.zoho.com.cn with SMTPS id 1585568630662338.29926700297824; Mon, 30 Mar 2020 19:43:50 +0800 (CST) From: Jiaxun Yang To: linux-mips@vger.kernel.org Cc: Jiaxun Yang , Bjorn Helgaas , Rob Herring , Thomas Bogendoerfer , Huacai Chen , Lorenzo Pieralisi , Andrew Murray , Paul Burton , linux-pci@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Message-ID: <20200330114239.1112759-3-jiaxun.yang@flygoat.com> Subject: [PATCH 2/5] PCI: Add Loongson PCI Controller support Date: Mon, 30 Mar 2020 19:42:27 +0800 X-Mailer: git-send-email 2.26.0.rc2 In-Reply-To: <20200330114239.1112759-1-jiaxun.yang@flygoat.com> References: <20200330114239.1112759-1-jiaxun.yang@flygoat.com> MIME-Version: 1.0 X-ZohoCNMailClient: External Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org This controller can be found on Loongson-2K SoC, Loongson-3 systems with RS780E/LS7A PCH. The RS780E part of code was previously located at arch/mips/pci/ops-loongson3.c and now it can use generic PCI driver implementation. Signed-off-by: Jiaxun Yang --- drivers/pci/controller/Kconfig | 10 + drivers/pci/controller/Makefile | 1 + drivers/pci/controller/pci-loongson.c | 263 ++++++++++++++++++++++++++ 3 files changed, 274 insertions(+) create mode 100644 drivers/pci/controller/pci-loongson.c diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index 91bfdb784829..f6c3058ec4b8 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -258,6 +258,16 @@ config PCI_HYPERV_INTERFACE The Hyper-V PCI Interface is a helper driver allows other drivers to have a common interface with the Hyper-V PCI frontend driver. +config PCI_LOONGSON + tristate "LOONGSON PCI Controller" + depends on MACH_LOONGSON64 + depends on OF + depends on PCI_QUIRKS + default y + help + Say Y here if you want to enable PCI controller support on + Loongson systems. + source "drivers/pci/controller/dwc/Kconfig" source "drivers/pci/controller/mobiveil/Kconfig" source "drivers/pci/controller/cadence/Kconfig" diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile index 158c59771824..fbac4b0190a0 100644 --- a/drivers/pci/controller/Makefile +++ b/drivers/pci/controller/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o obj-$(CONFIG_VMD) += vmd.o obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o +obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW obj-y += dwc/ obj-y += mobiveil/ diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c new file mode 100644 index 000000000000..b9abb27793ab --- /dev/null +++ b/drivers/pci/controller/pci-loongson.c @@ -0,0 +1,263 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Loongson PCI Host Controller Driver + * + * Copyright (C) 2020 Jiaxun Yang + */ + +#include +#include +#include +#include +#include + +#include "../pci.h" + +/* Device IDs */ +#define DEV_PCIE_PORT_0 0x7a09 +#define DEV_PCIE_PORT_1 0x7a19 +#define DEV_PCIE_PORT_2 0x7a29 + +#define DEV_LS2K_APB 0x7a02 +#define DEV_LS7A_CONF 0x7a10 +#define DEV_LS7A_LPC 0x7a0c + +#define FLAG_CFG0 BIT(0) +#define FLAG_CFG1 BIT(1) +#define FLAG_DEV_FIX BIT(2) + +struct loongson_pci { + void __iomem *cfg0_base; + void __iomem *cfg1_base; + struct platform_device *pdev; + u32 flags; +}; + +/* Fixup wrong class code in PCIe bridges */ +static void bridge_class_quirk(struct pci_dev *dev) +{ + dev->class = PCI_CLASS_BRIDGE_PCI << 8; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_0, bridge_class_quirk); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_1, bridge_class_quirk); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_2, bridge_class_quirk); + +static void system_bus_quirk(struct pci_dev *pdev) +{ + u16 tmp; + + pdev->mmio_always_on = 1; + pdev->non_compliant_bars = 1; + /* Enable MEM & IO Decoding */ + pci_read_config_word(pdev, PCI_STATUS, &tmp); + tmp |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY; + pci_write_config_word(pdev, PCI_STATUS, tmp); +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS2K_APB, system_bus_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_CONF, system_bus_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_LPC, system_bus_quirk); + +static void loongson_mrrs_quirk(struct pci_dev *dev) +{ + struct pci_bus *bus = dev->bus; + struct pci_dev *bridge; + static const struct pci_device_id bridge_devids[] = { + { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) }, + { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) }, + { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) }, + { 0, }, + }; + + + /* look for the matching bridge */ + while (!pci_is_root_bus(bus)) { + bridge = bus->self; + bus = bus->parent; + /* + * Some Loongson PCIE ports has a h/w limitation of + * 256 bytes maximum read request size. It can't handle + * anything higher than this. So force this limit on + * any devices attached under these ports. + */ + if (pci_match_id(bridge_devids, bridge)) { + if (pcie_get_readrq(dev) > 256) { + dev_info(&dev->dev, "limiting MRRS to 256\n"); + pcie_set_readrq(dev, 256); + } + break; + } + } +} +DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk); + +static void __iomem *cfg1_map(struct loongson_pci *priv, int bus, int dev, + int func, int where) +{ + unsigned long addroff = 0x0; + + if (bus != 0) + addroff |= BIT(28); /* Type 1 Access */ + addroff |= (where & 0xff) | ((where & 0xf00) << 16); + addroff |= (bus << 16) | (dev << 11) | (func << 8); + return priv->cfg1_base + addroff; +} + +static void __iomem *cfg0_map(struct loongson_pci *priv, int bus, int dev, + int func, int where) +{ + unsigned long addroff = 0x0; + + if (bus != 0) + addroff |= BIT(24); /* Type 1 Access */ + addroff |= (bus << 16) | (dev << 11) | (func << 8) | where; + return priv->cfg0_base + addroff; +} + +void __iomem *pci_loongson_map_bus(struct pci_bus *bus, unsigned int devfn, + int where) +{ + unsigned char busnum = bus->number; + int device = PCI_SLOT(devfn); + int function = PCI_FUNC(devfn); + struct pci_host_bridge *bridge = pci_find_host_bridge(bus); + struct loongson_pci *priv = pci_host_bridge_priv(bridge); + + /* + * Do not read more than one device on the bus other than + * the host bridge. + */ + if (bus->primary != 0 && device > 0 && + priv->flags & FLAG_DEV_FIX) + return NULL; + + /* CFG0 can only access standard space */ + if (where < PCI_CFG_SPACE_SIZE && priv->flags & FLAG_CFG0 && + priv->cfg0_base) + return cfg0_map(priv, busnum, device, function, where); + + /* CFG1 can access exp space */ + if (where < PCI_CFG_SPACE_EXP_SIZE && priv->flags & FLAG_CFG1 && + priv->cfg1_base) + return cfg1_map(priv, busnum, device, function, where); + + + return NULL; +} + +static int loongson_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + u8 val; + + irq = of_irq_parse_and_map_pci(dev, slot, pin); + if (irq > 0) + return irq; + + /* Care legacy systems */ + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &val); + /* 0xff is also invalid */ + if (val == 0xff) + return 0; + + return val; +} + +/* PCI operations */ +static struct pci_ops loongson_pci_ops = { + .map_bus = pci_loongson_map_bus, + .read = pci_generic_config_read32, + .write = pci_generic_config_write32, +}; + +static const struct of_device_id loongson_pci_of_match[] = { + { .compatible = "loongson,rs780e-pci", + .data = (void *)(FLAG_CFG0), }, + { .compatible = "loongson,ls2k-pci", + .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), }, + { .compatible = "loongson,ls7a-pci", + .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), }, + {} +}; + +static int loongson_pci_probe(struct platform_device *pdev) +{ + struct loongson_pci *priv; + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct pci_host_bridge *bridge; + const struct of_device_id *match; + struct resource regs; + int err; + LIST_HEAD(res); + + if (!node) + return -ENODEV; + + bridge = devm_pci_alloc_host_bridge(dev, sizeof(*priv)); + if (!bridge) + return -ENODEV; + + priv = pci_host_bridge_priv(bridge); + priv->pdev = pdev; + + match = of_match_device(loongson_pci_of_match, &pdev->dev); + priv->flags = (unsigned long)match->data; + + err = of_address_to_resource(node, 0, ®s); + if (err) { + dev_err(dev, "missing \"reg\" property for cfg0\n"); + return err; + } + + priv->cfg0_base = devm_pci_remap_cfg_resource(dev, ®s); + if (IS_ERR(priv->cfg0_base)) + return PTR_ERR(priv->cfg0_base); + + /* CFG1 is optional */ + if (priv->flags & FLAG_CFG1) { + if (of_address_to_resource(node, 1, ®s)) + dev_info(dev, "missing \"reg\" property for cfg1\n"); + else { + priv->cfg1_base = devm_pci_remap_cfg_resource(dev, ®s); + if (IS_ERR(priv->cfg1_base)) + priv->cfg1_base = NULL; + } + } + + + err = pci_parse_request_of_pci_ranges(dev, &res, + &bridge->dma_ranges, NULL); + if (err) { + dev_err(dev, "Failed to get bridge resources\n"); + return err; + } + + list_splice_init(&res, &bridge->windows); + bridge->dev.parent = dev; + bridge->sysdata = priv; + bridge->busnr = 0; + bridge->ops = &loongson_pci_ops; + bridge->map_irq = loongson_map_irq; + + err = pci_host_probe(bridge); + if (err) + return err; + + return 0; +} + +static struct platform_driver loongson_pci_driver = { + .driver = { + .name = "loongson-pci", + .of_match_table = loongson_pci_of_match, + }, + .probe = loongson_pci_probe, +}; +builtin_platform_driver(loongson_pci_driver);