diff mbox series

[v4,1/2] PCI: xilinx-cpm: Add device tree binding for Versal CPM host bridge.

Message ID 1580215483-8835-2-git-send-email-bharat.kumar.gogada@xilinx.com
State New
Headers show
Series Adding support for Versal CPM as Root Port driver. | expand

Commit Message

Bharat Kumar Gogada Jan. 28, 2020, 12:44 p.m. UTC 
Add device tree binding documentation for Versal CPM Root Port driver.

Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
---
 .../devicetree/bindings/pci/xilinx-versal-cpm.txt  | 66 ++++++++++++++++++++++
 1 file changed, 66 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/xilinx-versal-cpm.txt
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.txt b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.txt
new file mode 100644
index 0000000..35f8556
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.txt
@@ -0,0 +1,66 @@ 
+* Xilinx Versal CPM DMA Root Port Bridge DT description
+
+Required properties:
+- #address-cells: Address representation for root ports, set to <3>
+- #size-cells: Size representation for root ports, set to <2>
+- #interrupt-cells: specifies the number of cells needed to encode an
+	interrupt source. The value must be 1.
+- compatible: Should contain "xlnx,versal-cpm-host-1.00"
+- reg: Should contain configuration space (includes bridge registers) and
+	CPM system level control and status registers, and length
+- reg-names: Must include the following entries:
+	"cfg": configuration space region and bridge registers
+	"cpm_slcr": CPM system level control and status registers
+- interrupts: Should contain AXI PCIe interrupt
+- interrupt-map-mask,
+  interrupt-map: standard PCI properties to define the mapping of the
+	PCI interface to interrupt numbers.
+- ranges: ranges for the PCI memory regions (I/O space region is not
+	supported by hardware)
+	Please refer to the standard PCI bus binding document for a more
+	detailed explanation
+- msi-map: Maps a Requester ID to an MSI controller and associated MSI
+	sideband data
+- interrupt-names: Must include the following entries:
+	"misc": interrupt asserted when legacy or error interrupt is received
+
+Interrupt controller child node
++++++++++++++++++++++++++++++++
+Required properties:
+- interrupt-controller: identifies the node as an interrupt controller
+- #address-cells: specifies the number of cells needed to encode an
+	address. The value must be 0.
+- #interrupt-cells: specifies the number of cells needed to encode an
+	interrupt source. The value must be 1.
+
+
+Refer to the following binding document for more detailed description on
+the use of 'msi-map':
+	 Documentation/devicetree/bindings/pci/pci-msi.txt
+
+Example:
+	pci@fca10000 {
+		#address-cells = <3>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		compatible = "xlnx,versal-cpm-host-1.00";
+		interrupt-map = <0 0 0 1 &pcie_intc_0 1>,
+				<0 0 0 2 &pcie_intc_0 2>,
+				<0 0 0 3 &pcie_intc_0 3>,
+				<0 0 0 4 &pcie_intc_0 4>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-parent = <&gic>;
+		interrupt-names = "misc";
+		interrupts = <0 72 4>;
+		ranges = <0x02000000 0x00000000 0xE0000000 0x0 0xE0000000 0x00000000 0x10000000>,
+			 <0x43000000 0x00000080 0x00000000 0x00000080 0x00000000 0x00000000 0x80000000>;
+		msi-map = <0x0 &its_gic 0x0 0x10000>;
+		reg = <0x6 0x00000000 0x0 0x1000000>,
+		      <0x0 0xFCA10000 0x0 0x1000>;
+		reg-names = "cfg", "cpm_slcr";
+		pcie_intc_0: pci-interrupt-controller {
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller ;
+		};
+	};