Message ID | 1572922092-12323-3-git-send-email-yoshihiro.shimoda.uh@renesas.com |
---|---|
State | Superseded |
Delegated to: | Lorenzo Pieralisi |
Headers | show |
Series | [v3,1/2] Revert "PCI: rcar: Fix missing MACCTLR register setting in rcar_pcie_hw_init()" | expand |
Hi Shimoda-san, On Tue, Nov 5, 2019 at 3:48 AM Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> wrote: > According to the R-Car Gen2/3 manual, "Be sure to write the initial > value (= H'80FF 0000) to MACCTLR before enabling PCIETCTLR.CFINIT". > To avoid unexpected behaviors, this patch fixes it. Note that > the SPCHG bit of MACCTLR register description said "Only writing 1 > is valid and writing 0 is invalid" but this "invalid" means > "ignored", not "prohibited". So, any documentation conflict doesn't > exist about writing the MACCTLR register. > > Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com> > Fixes: c25da4778803 ("PCI: rcar: Add Renesas R-Car PCIe driver") > Fixes: be20bbcb0a8c ("PCI: rcar: Add the initialization of PCIe link in resume_noirq()") > Cc: <stable@vger.kernel.org> # v5.2+ > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Thanks for your patch! > --- a/drivers/pci/controller/pcie-rcar.c > +++ b/drivers/pci/controller/pcie-rcar.c > @@ -91,8 +91,12 @@ > #define LINK_SPEED_2_5GTS (1 << 16) > #define LINK_SPEED_5_0GTS (2 << 16) > #define MACCTLR 0x011058 > +#define MACCTLR_RESERVED23_16 GENMASK(23, 16) MACCTLR_NFTS_MASK? > #define SPEED_CHANGE BIT(24) > #define SCRAMBLE_DISABLE BIT(27) > +#define LTSMDIS BIT(31) > + /* Be sure to write the initial value (H'80FF 0000) to MACCTLR */ Do we need this comment? > +#define MACCTLR_INIT_VAL (LTSMDIS | MACCTLR_RESERVED23_16) > #define PMSR 0x01105c > #define MACS2R 0x011078 > #define MACCGSPSETR 0x011084 With the above fixed: Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Hi Geert-san, Thank you for your review! > From: Geert Uytterhoeven, Sent: Tuesday, November 5, 2019 5:50 PM > > Hi Shimoda-san, > > On Tue, Nov 5, 2019 at 3:48 AM Yoshihiro Shimoda > <yoshihiro.shimoda.uh@renesas.com> wrote: > > According to the R-Car Gen2/3 manual, "Be sure to write the initial > > value (= H'80FF 0000) to MACCTLR before enabling PCIETCTLR.CFINIT". > > To avoid unexpected behaviors, this patch fixes it. Note that > > the SPCHG bit of MACCTLR register description said "Only writing 1 > > is valid and writing 0 is invalid" but this "invalid" means > > "ignored", not "prohibited". So, any documentation conflict doesn't > > exist about writing the MACCTLR register. > > > > Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com> > > Fixes: c25da4778803 ("PCI: rcar: Add Renesas R-Car PCIe driver") > > Fixes: be20bbcb0a8c ("PCI: rcar: Add the initialization of PCIe link in resume_noirq()") > > Cc: <stable@vger.kernel.org> # v5.2+ > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > > Thanks for your patch! > > > --- a/drivers/pci/controller/pcie-rcar.c > > +++ b/drivers/pci/controller/pcie-rcar.c > > @@ -91,8 +91,12 @@ > > #define LINK_SPEED_2_5GTS (1 << 16) > > #define LINK_SPEED_5_0GTS (2 << 16) > > #define MACCTLR 0x011058 > > +#define MACCTLR_RESERVED23_16 GENMASK(23, 16) > > MACCTLR_NFTS_MASK? I should have said on previous email thread [1] though, since SH7786 PCIE HW manual said NFTS (NFTS) but any R-Car SoCs' HW manual said just Reserved with H'FF, so that I prefer to describe RESERVED instead of NFTS. Do you agree? [1] https://marc.info/?l=linux-renesas-soc&m=157242422327368&w=2 > > #define SPEED_CHANGE BIT(24) > > #define SCRAMBLE_DISABLE BIT(27) > > +#define LTSMDIS BIT(31) > > + /* Be sure to write the initial value (H'80FF 0000) to MACCTLR */ > > Do we need this comment? It's a little redundant. So, I'll remove it. > > +#define MACCTLR_INIT_VAL (LTSMDIS | MACCTLR_RESERVED23_16) > > #define PMSR 0x01105c > > #define MACS2R 0x011078 > > #define MACCGSPSETR 0x011084 > > With the above fixed: > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Thanks! Best regards, Yoshihiro Shimoda
Hi Shimoda-san, On Tue, Nov 5, 2019 at 10:26 AM Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> wrote: > > From: Geert Uytterhoeven, Sent: Tuesday, November 5, 2019 5:50 PM > > On Tue, Nov 5, 2019 at 3:48 AM Yoshihiro Shimoda > > <yoshihiro.shimoda.uh@renesas.com> wrote: > > > According to the R-Car Gen2/3 manual, "Be sure to write the initial > > > value (= H'80FF 0000) to MACCTLR before enabling PCIETCTLR.CFINIT". > > > To avoid unexpected behaviors, this patch fixes it. Note that > > > the SPCHG bit of MACCTLR register description said "Only writing 1 > > > is valid and writing 0 is invalid" but this "invalid" means > > > "ignored", not "prohibited". So, any documentation conflict doesn't > > > exist about writing the MACCTLR register. > > > > > > Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com> > > > Fixes: c25da4778803 ("PCI: rcar: Add Renesas R-Car PCIe driver") > > > Fixes: be20bbcb0a8c ("PCI: rcar: Add the initialization of PCIe link in resume_noirq()") > > > Cc: <stable@vger.kernel.org> # v5.2+ > > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > > > > Thanks for your patch! > > > > > --- a/drivers/pci/controller/pcie-rcar.c > > > +++ b/drivers/pci/controller/pcie-rcar.c > > > @@ -91,8 +91,12 @@ > > > #define LINK_SPEED_2_5GTS (1 << 16) > > > #define LINK_SPEED_5_0GTS (2 << 16) > > > #define MACCTLR 0x011058 > > > +#define MACCTLR_RESERVED23_16 GENMASK(23, 16) > > > > MACCTLR_NFTS_MASK? > > I should have said on previous email thread [1] though, > since SH7786 PCIE HW manual said NFTS (NFTS) but > any R-Car SoCs' HW manual said just Reserved with H'FF, > so that I prefer to describe RESERVED instead of NFTS. > Do you agree? > > [1] > https://marc.info/?l=linux-renesas-soc&m=157242422327368&w=2 My personal stance is to make it as easy as possible for the reader of the code ("optimize for reading, not for writing"), as code is written once, but read many more times later. This is not the first time register bits were documented before, and changed to reserved later. In this case the resemblance to the SH7786 PCIe block is obvious, and the SH7786 hardware user's manual is available publicly. Gr{oetje,eeting}s, Geert
Hi Geert-san, > From: Geert Uytterhoeven, Sent: Tuesday, November 5, 2019 6:53 PM > > Hi Shimoda-san, > > On Tue, Nov 5, 2019 at 10:26 AM Yoshihiro Shimoda > <yoshihiro.shimoda.uh@renesas.com> wrote: > > > From: Geert Uytterhoeven, Sent: Tuesday, November 5, 2019 5:50 PM > > > On Tue, Nov 5, 2019 at 3:48 AM Yoshihiro Shimoda > > > <yoshihiro.shimoda.uh@renesas.com> wrote: > > > > According to the R-Car Gen2/3 manual, "Be sure to write the initial > > > > value (= H'80FF 0000) to MACCTLR before enabling PCIETCTLR.CFINIT". > > > > To avoid unexpected behaviors, this patch fixes it. Note that > > > > the SPCHG bit of MACCTLR register description said "Only writing 1 > > > > is valid and writing 0 is invalid" but this "invalid" means > > > > "ignored", not "prohibited". So, any documentation conflict doesn't > > > > exist about writing the MACCTLR register. > > > > > > > > Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com> > > > > Fixes: c25da4778803 ("PCI: rcar: Add Renesas R-Car PCIe driver") > > > > Fixes: be20bbcb0a8c ("PCI: rcar: Add the initialization of PCIe link in resume_noirq()") > > > > Cc: <stable@vger.kernel.org> # v5.2+ > > > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > > > > > > Thanks for your patch! > > > > > > > --- a/drivers/pci/controller/pcie-rcar.c > > > > +++ b/drivers/pci/controller/pcie-rcar.c > > > > @@ -91,8 +91,12 @@ > > > > #define LINK_SPEED_2_5GTS (1 << 16) > > > > #define LINK_SPEED_5_0GTS (2 << 16) > > > > #define MACCTLR 0x011058 > > > > +#define MACCTLR_RESERVED23_16 GENMASK(23, 16) > > > > > > MACCTLR_NFTS_MASK? > > > > I should have said on previous email thread [1] though, > > since SH7786 PCIE HW manual said NFTS (NFTS) but > > any R-Car SoCs' HW manual said just Reserved with H'FF, > > so that I prefer to describe RESERVED instead of NFTS. > > Do you agree? > > > > [1] > > https://marc.info/?l=linux-renesas-soc&m=157242422327368&w=2 > > My personal stance is to make it as easy as possible for the reader of > the code ("optimize for reading, not for writing"), as code is written once, > but read many more times later. > This is not the first time register bits were documented before, and changed > to reserved later. > In this case the resemblance to the SH7786 PCIe block is obvious, and > the SH7786 hardware user's manual is available publicly. Thank you for sharing your stance. I understood it. So, I'll fix it as following. Is it acceptable? #define MACCTLR_NFTS_MASK GENMASK(23, 16) /* The name is from SH7786 */ Best regards, Yoshihiro Shimoda > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like that. > -- Linus Torvalds
Hi Shimoda-san, On Tue, Nov 5, 2019 at 11:11 AM Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> wrote: > > From: Geert Uytterhoeven, Sent: Tuesday, November 5, 2019 6:53 PM > > On Tue, Nov 5, 2019 at 10:26 AM Yoshihiro Shimoda > > <yoshihiro.shimoda.uh@renesas.com> wrote: > > > > From: Geert Uytterhoeven, Sent: Tuesday, November 5, 2019 5:50 PM > > > > On Tue, Nov 5, 2019 at 3:48 AM Yoshihiro Shimoda > > > > <yoshihiro.shimoda.uh@renesas.com> wrote: > > > > > According to the R-Car Gen2/3 manual, "Be sure to write the initial > > > > > value (= H'80FF 0000) to MACCTLR before enabling PCIETCTLR.CFINIT". > > > > > To avoid unexpected behaviors, this patch fixes it. Note that > > > > > the SPCHG bit of MACCTLR register description said "Only writing 1 > > > > > is valid and writing 0 is invalid" but this "invalid" means > > > > > "ignored", not "prohibited". So, any documentation conflict doesn't > > > > > exist about writing the MACCTLR register. > > > > > > > > > > Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com> > > > > > Fixes: c25da4778803 ("PCI: rcar: Add Renesas R-Car PCIe driver") > > > > > Fixes: be20bbcb0a8c ("PCI: rcar: Add the initialization of PCIe link in resume_noirq()") > > > > > Cc: <stable@vger.kernel.org> # v5.2+ > > > > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > > > > > > > > Thanks for your patch! > > > > > > > > > --- a/drivers/pci/controller/pcie-rcar.c > > > > > +++ b/drivers/pci/controller/pcie-rcar.c > > > > > @@ -91,8 +91,12 @@ > > > > > #define LINK_SPEED_2_5GTS (1 << 16) > > > > > #define LINK_SPEED_5_0GTS (2 << 16) > > > > > #define MACCTLR 0x011058 > > > > > +#define MACCTLR_RESERVED23_16 GENMASK(23, 16) > > > > > > > > MACCTLR_NFTS_MASK? > > > > > > I should have said on previous email thread [1] though, > > > since SH7786 PCIE HW manual said NFTS (NFTS) but > > > any R-Car SoCs' HW manual said just Reserved with H'FF, > > > so that I prefer to describe RESERVED instead of NFTS. > > > Do you agree? > > > > > > [1] > > > https://marc.info/?l=linux-renesas-soc&m=157242422327368&w=2 > > > > My personal stance is to make it as easy as possible for the reader of > > the code ("optimize for reading, not for writing"), as code is written once, > > but read many more times later. > > This is not the first time register bits were documented before, and changed > > to reserved later. > > In this case the resemblance to the SH7786 PCIe block is obvious, and > > the SH7786 hardware user's manual is available publicly. > > Thank you for sharing your stance. I understood it. So, I'll fix it as following. > Is it acceptable? > > #define MACCTLR_NFTS_MASK GENMASK(23, 16) /* The name is from SH7786 */ Sounds great to me. Thanks! Gr{oetje,eeting}s, Geert
Hi Geert-san, > From: Geert Uytterhoeven, Sent: Tuesday, November 5, 2019 7:26 PM <snip> > > > > > > --- a/drivers/pci/controller/pcie-rcar.c > > > > > > +++ b/drivers/pci/controller/pcie-rcar.c > > > > > > @@ -91,8 +91,12 @@ > > > > > > #define LINK_SPEED_2_5GTS (1 << 16) > > > > > > #define LINK_SPEED_5_0GTS (2 << 16) > > > > > > #define MACCTLR 0x011058 > > > > > > +#define MACCTLR_RESERVED23_16 GENMASK(23, 16) > > > > > > > > > > MACCTLR_NFTS_MASK? > > > > > > > > I should have said on previous email thread [1] though, > > > > since SH7786 PCIE HW manual said NFTS (NFTS) but > > > > any R-Car SoCs' HW manual said just Reserved with H'FF, > > > > so that I prefer to describe RESERVED instead of NFTS. > > > > Do you agree? > > > > > > > > [1] > > > > https://marc.info/?l=linux-renesas-soc&m=157242422327368&w=2 > > > > > > My personal stance is to make it as easy as possible for the reader of > > > the code ("optimize for reading, not for writing"), as code is written once, > > > but read many more times later. > > > This is not the first time register bits were documented before, and changed > > > to reserved later. > > > In this case the resemblance to the SH7786 PCIe block is obvious, and > > > the SH7786 hardware user's manual is available publicly. > > > > Thank you for sharing your stance. I understood it. So, I'll fix it as following. > > Is it acceptable? > > > > #define MACCTLR_NFTS_MASK GENMASK(23, 16) /* The name is from SH7786 */ > > Sounds great to me. > Thanks! Thank you for the reply! I got it! Best regards, Yoshihiro Shimoda
diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c index 40d8c54..1bfec1f 100644 --- a/drivers/pci/controller/pcie-rcar.c +++ b/drivers/pci/controller/pcie-rcar.c @@ -91,8 +91,12 @@ #define LINK_SPEED_2_5GTS (1 << 16) #define LINK_SPEED_5_0GTS (2 << 16) #define MACCTLR 0x011058 +#define MACCTLR_RESERVED23_16 GENMASK(23, 16) #define SPEED_CHANGE BIT(24) #define SCRAMBLE_DISABLE BIT(27) +#define LTSMDIS BIT(31) + /* Be sure to write the initial value (H'80FF 0000) to MACCTLR */ +#define MACCTLR_INIT_VAL (LTSMDIS | MACCTLR_RESERVED23_16) #define PMSR 0x01105c #define MACS2R 0x011078 #define MACCGSPSETR 0x011084 @@ -613,6 +617,8 @@ static int rcar_pcie_hw_init(struct rcar_pcie *pcie) if (IS_ENABLED(CONFIG_PCI_MSI)) rcar_pci_write_reg(pcie, 0x801f0000, PCIEMSITXR); + rcar_pci_write_reg(pcie, MACCTLR_INIT_VAL, MACCTLR); + /* Finish initialization - establish a PCI Express link */ rcar_pci_write_reg(pcie, CFINIT, PCIETCTLR); @@ -1235,6 +1241,7 @@ static int rcar_pcie_resume_noirq(struct device *dev) return 0; /* Re-establish the PCIe link */ + rcar_pci_write_reg(pcie, MACCTLR_INIT_VAL, MACCTLR); rcar_pci_write_reg(pcie, CFINIT, PCIETCTLR); return rcar_pcie_wait_for_dl(pcie); }
According to the R-Car Gen2/3 manual, "Be sure to write the initial value (= H'80FF 0000) to MACCTLR before enabling PCIETCTLR.CFINIT". To avoid unexpected behaviors, this patch fixes it. Note that the SPCHG bit of MACCTLR register description said "Only writing 1 is valid and writing 0 is invalid" but this "invalid" means "ignored", not "prohibited". So, any documentation conflict doesn't exist about writing the MACCTLR register. Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com> Fixes: c25da4778803 ("PCI: rcar: Add Renesas R-Car PCIe driver") Fixes: be20bbcb0a8c ("PCI: rcar: Add the initialization of PCIe link in resume_noirq()") Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- drivers/pci/controller/pcie-rcar.c | 7 +++++++ 1 file changed, 7 insertions(+)