mbox series

[v4,00/10] Add PCIe support for bcm2712

Message ID 20241025124515.14066-1-svarbanov@suse.de
Headers show
Series Add PCIe support for bcm2712 | expand

Message

Stanimir Varbanov Oct. 25, 2024, 12:45 p.m. UTC 
Here is v4 of the series which aims to add support for PCIe on bcm2712 SoC
used by RPi5. Previous v3 can be found at [1].

v3 -> v4 changes include:
 - Addressed comments on the interrupt-controller driver (Thomas)
 - Moved "Reuse config structure" patch earlier in the series (Bjorn)
 - Merged "Avoid turn off of bridge reset" into "Add bcm2712 support" (Bjorn)
 - Fixed DTB warnings on broadcom/bcm2712-rpi-5-b.dtb 

For more detailed info check patches.

Comments are welcome!
~Stan

[1] https://patchwork.kernel.org/project/linux-pci/list/?series=898891

Stanimir Varbanov (10):
  dt-bindings: interrupt-controller: Add bcm2712 MSI-X DT bindings
  dt-bindings: PCI: brcmstb: Update bindings for PCIe on bcm2712
  irqchip: Add Broadcom bcm2712 MSI-X interrupt controller
  PCI: brcmstb: Reuse config structure
  PCI: brcmstb: Expand inbound window size up to 64GB
  PCI: brcmstb: Enable external MSI-X if available
  PCI: brcmstb: Add bcm2712 support
  PCI: brcmstb: Adjust PHY PLL setup to use a 54MHz input refclk
  arm64: dts: broadcom: bcm2712: Add PCIe DT nodes
  arm64: dts: broadcom: bcm2712-rpi-5-b: Enable PCIe DT nodes

 .../brcm,bcm2712-msix.yaml                    |  60 ++++
 .../bindings/pci/brcm,stb-pcie.yaml           |  21 ++
 .../boot/dts/broadcom/bcm2712-rpi-5-b.dts     |   8 +
 arch/arm64/boot/dts/broadcom/bcm2712.dtsi     | 162 +++++++++
 drivers/irqchip/Kconfig                       |  16 +
 drivers/irqchip/Makefile                      |   1 +
 drivers/irqchip/irq-bcm2712-mip.c             | 310 ++++++++++++++++++
 drivers/pci/controller/pcie-brcmstb.c         | 204 +++++++++---
 8 files changed, 735 insertions(+), 47 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2712-msix.yaml
 create mode 100644 drivers/irqchip/irq-bcm2712-mip.c