| Message ID | 20220124131118.17887-1-yangyicong@hisilicon.com |
|---|---|
| Headers | show |
| Series | Add support for HiSilicon PCIe Tune and Trace device | expand |
Hi perf, ETM and PCI related experts, a gentle ping ... appreciate for the comments. thanks. On 2022/1/24 21:11, Yicong Yang wrote: > HiSilicon PCIe tune and trace device (PTT) is a PCIe Root Complex > integrated Endpoint (RCiEP) device, providing the capability > to dynamically monitor and tune the PCIe traffic (tune), > and trace the TLP headers (trace). > > PTT tune is designed for monitoring and adjusting PCIe link parameters. > We provide several parameters of the PCIe link. Through the driver, > user can adjust the value of certain parameter to affect the PCIe link > for the purpose of enhancing the performance in certian situation. > > PTT trace is designed for dumping the TLP headers to the memory, which > can be used to analyze the transactions and usage condition of the PCIe > Link. Users can choose filters to trace headers, by either requester > ID, or those downstream of a set of Root Ports on the same core of the > PTT device. It's also supported to trace the headers of certain type and > of certain direction. > > The driver registers a PMU device for each PTT device. The trace can > be used through `perf record` and the traced headers can be decoded > by `perf report`. The perf command support for the device is also > added in this patchset. The tune can be used through the sysfs > attributes of related PMU device. See the documentation for the > detailed usage. > > Change since v2: > - address the comments from Mathieu > - rename the directory to ptt to match the function of the device > - spinoff the declarations to a separate header > - split the trace function to several patches > - some other comments. > - make default smmu domain type of PTT device to identity > Drop the RMR as it's not recommended and use an iommu_def_domain_type > quirk to passthrough the device DMA as suggested by Robin. > Link: https://lore.kernel.org/linux-pci/20211116090625.53702-1-yangyicong@hisilicon.com/ > > Change since v1: > - switch the user interface of trace to perf from debugfs > - switch the user interface of tune to sysfs from debugfs > - add perf tool support to start trace and decode the trace data > - address the comments of documentation from Bjorn > - add RMR[1] support of the device as trace works in RMR mode or > direct DMA mode. RMR support is achieved by common APIs rather > than the APIs implemented in [1]. > Link: https://lore.kernel.org/lkml/1618654631-42454-1-git-send-email-yangyicong@hisilicon.com/ > > [1] https://lore.kernel.org/linux-acpi/20210805080724.480-1-shameerali.kolothum.thodi@huawei.com/ > > Qi Liu (1): > perf tool: Add support for HiSilicon PCIe Tune and Trace device driver > > Yicong Yang (7): > hwtracing: Add trace function support for HiSilicon PCIe Tune and > Trace device > hisi_ptt: Register PMU device for PTT trace > hisi_ptt: Add support for dynamically updating the filter list > hisi_ptt: Add tune function support for HiSilicon PCIe Tune and Trace > device > docs: Add HiSilicon PTT device driver documentation > MAINTAINERS: Add maintainer for HiSilicon PTT driver > iommu/arm-smmu-v3: Make default domain type of HiSilicon PTT device to > identity > > Documentation/trace/hisi-ptt.rst | 304 +++++ > MAINTAINERS | 7 + > drivers/Makefile | 1 + > drivers/hwtracing/Kconfig | 2 + > drivers/hwtracing/ptt/Kconfig | 11 + > drivers/hwtracing/ptt/Makefile | 2 + > drivers/hwtracing/ptt/hisi_ptt.c | 1124 +++++++++++++++++ > drivers/hwtracing/ptt/hisi_ptt.h | 239 ++++ > drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 16 + > tools/perf/arch/arm/util/auxtrace.c | 56 +- > tools/perf/arch/arm/util/pmu.c | 3 + > tools/perf/arch/arm64/util/Build | 2 +- > tools/perf/arch/arm64/util/hisi_ptt.c | 195 +++ > tools/perf/util/Build | 2 + > tools/perf/util/auxtrace.c | 4 + > tools/perf/util/auxtrace.h | 1 + > tools/perf/util/hisi-ptt-decoder/Build | 1 + > .../hisi-ptt-decoder/hisi-ptt-pkt-decoder.c | 170 +++ > .../hisi-ptt-decoder/hisi-ptt-pkt-decoder.h | 28 + > tools/perf/util/hisi_ptt.c | 228 ++++ > tools/perf/util/hisi_ptt.h | 28 + > 21 files changed, 2420 insertions(+), 4 deletions(-) > create mode 100644 Documentation/trace/hisi-ptt.rst > create mode 100644 drivers/hwtracing/ptt/Kconfig > create mode 100644 drivers/hwtracing/ptt/Makefile > create mode 100644 drivers/hwtracing/ptt/hisi_ptt.c > create mode 100644 drivers/hwtracing/ptt/hisi_ptt.h > create mode 100644 tools/perf/arch/arm64/util/hisi_ptt.c > create mode 100644 tools/perf/util/hisi-ptt-decoder/Build > create mode 100644 tools/perf/util/hisi-ptt-decoder/hisi-ptt-pkt-decoder.c > create mode 100644 tools/perf/util/hisi-ptt-decoder/hisi-ptt-pkt-decoder.h > create mode 100644 tools/perf/util/hisi_ptt.c > create mode 100644 tools/perf/util/hisi_ptt.h >
HiSilicon PCIe tune and trace device (PTT) is a PCIe Root Complex integrated Endpoint (RCiEP) device, providing the capability to dynamically monitor and tune the PCIe traffic (tune), and trace the TLP headers (trace). PTT tune is designed for monitoring and adjusting PCIe link parameters. We provide several parameters of the PCIe link. Through the driver, user can adjust the value of certain parameter to affect the PCIe link for the purpose of enhancing the performance in certian situation. PTT trace is designed for dumping the TLP headers to the memory, which can be used to analyze the transactions and usage condition of the PCIe Link. Users can choose filters to trace headers, by either requester ID, or those downstream of a set of Root Ports on the same core of the PTT device. It's also supported to trace the headers of certain type and of certain direction. The driver registers a PMU device for each PTT device. The trace can be used through `perf record` and the traced headers can be decoded by `perf report`. The perf command support for the device is also added in this patchset. The tune can be used through the sysfs attributes of related PMU device. See the documentation for the detailed usage. Change since v2: - address the comments from Mathieu - rename the directory to ptt to match the function of the device - spinoff the declarations to a separate header - split the trace function to several patches - some other comments. - make default smmu domain type of PTT device to identity Drop the RMR as it's not recommended and use an iommu_def_domain_type quirk to passthrough the device DMA as suggested by Robin. Link: https://lore.kernel.org/linux-pci/20211116090625.53702-1-yangyicong@hisilicon.com/ Change since v1: - switch the user interface of trace to perf from debugfs - switch the user interface of tune to sysfs from debugfs - add perf tool support to start trace and decode the trace data - address the comments of documentation from Bjorn - add RMR[1] support of the device as trace works in RMR mode or direct DMA mode. RMR support is achieved by common APIs rather than the APIs implemented in [1]. Link: https://lore.kernel.org/lkml/1618654631-42454-1-git-send-email-yangyicong@hisilicon.com/ [1] https://lore.kernel.org/linux-acpi/20210805080724.480-1-shameerali.kolothum.thodi@huawei.com/ Qi Liu (1): perf tool: Add support for HiSilicon PCIe Tune and Trace device driver Yicong Yang (7): hwtracing: Add trace function support for HiSilicon PCIe Tune and Trace device hisi_ptt: Register PMU device for PTT trace hisi_ptt: Add support for dynamically updating the filter list hisi_ptt: Add tune function support for HiSilicon PCIe Tune and Trace device docs: Add HiSilicon PTT device driver documentation MAINTAINERS: Add maintainer for HiSilicon PTT driver iommu/arm-smmu-v3: Make default domain type of HiSilicon PTT device to identity Documentation/trace/hisi-ptt.rst | 304 +++++ MAINTAINERS | 7 + drivers/Makefile | 1 + drivers/hwtracing/Kconfig | 2 + drivers/hwtracing/ptt/Kconfig | 11 + drivers/hwtracing/ptt/Makefile | 2 + drivers/hwtracing/ptt/hisi_ptt.c | 1124 +++++++++++++++++ drivers/hwtracing/ptt/hisi_ptt.h | 239 ++++ drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 16 + tools/perf/arch/arm/util/auxtrace.c | 56 +- tools/perf/arch/arm/util/pmu.c | 3 + tools/perf/arch/arm64/util/Build | 2 +- tools/perf/arch/arm64/util/hisi_ptt.c | 195 +++ tools/perf/util/Build | 2 + tools/perf/util/auxtrace.c | 4 + tools/perf/util/auxtrace.h | 1 + tools/perf/util/hisi-ptt-decoder/Build | 1 + .../hisi-ptt-decoder/hisi-ptt-pkt-decoder.c | 170 +++ .../hisi-ptt-decoder/hisi-ptt-pkt-decoder.h | 28 + tools/perf/util/hisi_ptt.c | 228 ++++ tools/perf/util/hisi_ptt.h | 28 + 21 files changed, 2420 insertions(+), 4 deletions(-) create mode 100644 Documentation/trace/hisi-ptt.rst create mode 100644 drivers/hwtracing/ptt/Kconfig create mode 100644 drivers/hwtracing/ptt/Makefile create mode 100644 drivers/hwtracing/ptt/hisi_ptt.c create mode 100644 drivers/hwtracing/ptt/hisi_ptt.h create mode 100644 tools/perf/arch/arm64/util/hisi_ptt.c create mode 100644 tools/perf/util/hisi-ptt-decoder/Build create mode 100644 tools/perf/util/hisi-ptt-decoder/hisi-ptt-pkt-decoder.c create mode 100644 tools/perf/util/hisi-ptt-decoder/hisi-ptt-pkt-decoder.h create mode 100644 tools/perf/util/hisi_ptt.c create mode 100644 tools/perf/util/hisi_ptt.h