new file mode 100644
@@ -0,0 +1,159 @@
+/* Primary function overlay window definitions
+ * and service functions used by LPDDR chips
+ */
+#include <linux/mtd/qinfo.h>
+
+#ifndef __LINUX_MTD_PFOW_H
+#define __LINUX_MTD_PFOW_H
+
+/* PFOW registers addressing */
+/* Address of symbol "P" */
+#define PFOW_QUERY_STRING_P 0x0000
+/* Address of symbol "F" */
+#define PFOW_QUERY_STRING_F 0x0002
+/* Address of symbol "O" */
+#define PFOW_QUERY_STRING_O 0x0004
+/* Address of symbol "W" */
+#define PFOW_QUERY_STRING_W 0x0006
+/* Identification info for LPDDR chip */
+#define PFOW_MANUFACTURER_ID 0x0020
+#define PFOW_DEVICE_ID 0x0022
+/* Address in PFOW where prog buffer can can be found */
+#define PFOW_PROGRAM_BUFFER_OFFSET 0x0040
+/* Size of program buffer in words */
+#define PFOW_PROGRAM_BUFFER_SIZE 0x0042
+/* Address command code register */
+#define PFOW_COMMAND_CODE 0x0080
+/* command data register */
+#define PFOW_COMMAND_DATA 0x0084
+/* command address register lower address bits */
+#define PFOW_COMMAND_ADDRESS_L 0x0088
+/* command address register upper address bits */
+#define PFOW_COMMAND_ADDRESS_H 0x008a
+/* number of bytes to be proggrammed lower address bits */
+#define PFOW_DATA_COUNT_L 0x0090
+/* number of bytes to be proggrammed higher address bits */
+#define PFOW_DATA_COUNT_H 0x0092
+/* command execution register, the only possible value is 0x01 */
+#define PFOW_COMMAND_EXECUTE 0x00c0
+/* 0x01 should be written at this address to clear buffer */
+#define PFOW_CLEAR_PROGRAM_BUFFER 0x00c4
+/* device program/erase suspend register */
+#define PFOW_PROGRAM_ERASE_SUSPEND 0x00c8
+/* device status register */
+#define PFOW_DSR 0x00cc
+
+/* LPDDR memory device command codes */
+/* They are possible values of PFOW command code register */
+#define LPDDR_WORD_PROGRAM 0x0041
+#define LPDDR_BUFF_PROGRAM 0x00E9
+#define LPDDR_BLOCK_ERASE 0x0020
+#define LPDDR_LOCK_BLOCK 0x0061
+#define LPDDR_UNLOCK_BLOCK 0x0062
+#define LPDDR_READ_BLOCK_LOCK_STATUS 0x0065
+#define LPDDR_INFO_QUERY 0x0098
+#define LPDDR_READ_OTP 0x0097
+#define LPDDR_PROG_OTP 0x00C0
+#define LPDDR_RESUME 0x00D0
+
+/* Defines possible value of PFOW command execution register */
+#define LPDDR_START_EXECUTION 0x0001
+
+/* Defines possible value of PFOW program/erase suspend register */
+#define LPDDR_SUSPEND 0x0001
+
+/* Possible values of PFOW device status register */
+/* access R - read; RC read & clearable */
+#define DSR_DPS (1<<1) /* RC; device protect status
+ * 0 - not protected 1 - locked */
+#define DSR_PSS (1<<2) /* R; program suspend status;
+ * 0-prog in progress/completed,
+ * 1- prog suspended */
+#define DSR_VPPS (1<<3) /* RC; 0-Vpp OK, * 1-Vpp low */
+#define DSR_PROGRAM_STATUS (1<<4) /* RC; 0-successful, 1-error */
+#define DSR_ERASE_STATUS (1<<5) /* RC; erase or blank check status;
+ * 0-success erase/blank check,
+ * 1 blank check error */
+#define DSR_ESS (1<<6) /* R; erase suspend status;
+ * 0-erase in progress/complete,
+ * 1 erase suspended */
+#define DSR_READY_STATUS (1<<7) /* R; Device status
+ * 0-busy,
+ * 1-ready */
+#define DSR_RPS (0x3<<8) /* RC; region program status
+ * 00 - Success,
+ * 01-re-program attempt in region with
+ * object mode data,
+ * 10-object mode program w attempt in
+ * region with control mode data
+ * 11-attempt to program invalid half
+ * with 0x41 command */
+#define DSR_AOS (1<<12) /* RC; 1- AO related failure */
+#define DSR_AVAILABLE (1<<15) /* R; Device availbility
+ * 1 - Device available
+ * 0 - not available */
+
+/* The superset of all possible error bits in DSR */
+#define DSR_ERR 0x133A
+
+static inline void send_pfow_command(struct map_info *map,
+ unsigned long cmd_code, unsigned long adr,
+ unsigned long len, map_word *datum)
+{
+ int bits_per_chip = map_bankwidth(map) * 8;
+ int chipnum;
+ struct lpddr_private *lpddr = map->fldrv_priv;
+ chipnum = adr >> lpddr->chipshift;
+
+ map_write(map, CMD(cmd_code), map->pfow_base + PFOW_COMMAND_CODE);
+ map_write(map, CMD(adr & ((1<<bits_per_chip) - 1)),
+ map->pfow_base + PFOW_COMMAND_ADDRESS_L);
+ map_write(map, CMD(adr>>bits_per_chip),
+ map->pfow_base + PFOW_COMMAND_ADDRESS_H);
+ if (len) {
+ map_write(map, CMD(len & ((1<<bits_per_chip) - 1)),
+ map->pfow_base + PFOW_DATA_COUNT_L);
+ map_write(map, CMD(len>>bits_per_chip),
+ map->pfow_base + PFOW_DATA_COUNT_H);
+ }
+ if (datum)
+ map_write(map, *datum, map->pfow_base + PFOW_COMMAND_DATA);
+
+ /* Command execution start */
+ map_write(map, CMD(LPDDR_START_EXECUTION),
+ map->pfow_base + PFOW_COMMAND_EXECUTE);
+}
+
+static inline void print_drs_error(unsigned dsr)
+{
+ int prog_status = (dsr & DSR_RPS) >> 8;
+
+ if (!(dsr & DSR_AVAILABLE))
+ printk(KERN_NOTICE"DSR.15: (0) Device not Available\n");
+ if (prog_status & 0x03)
+ printk(KERN_NOTICE"DSR.9,8: (11) Attempt to program invalid "
+ "half with 41h command\n");
+ else if (prog_status & 0x02)
+ printk(KERN_NOTICE"DSR.9,8: (10) Object Mode Program attempt "
+ "in region with Control Mode data\n");
+ else if (prog_status & 0x01)
+ printk(KERN_NOTICE"DSR.9,8: (01) Program attempt in region "
+ "with Object Mode data\n");
+ if (!(dsr & DSR_READY_STATUS))
+ printk(KERN_NOTICE"DSR.7: (0) Device is Busy\n");
+ if (dsr & DSR_ESS)
+ printk(KERN_NOTICE"DSR.6: (1) Erase Suspended\n");
+ if (dsr & DSR_ERASE_STATUS)
+ printk(KERN_NOTICE"DSR.5: (1) Erase/Blank check error\n");
+ if (dsr & DSR_PROGRAM_STATUS)
+ printk(KERN_NOTICE"DSR.4: (1) Program Error\n");
+ if (dsr & DSR_VPPS)
+ printk(KERN_NOTICE"DSR.3: (1) Vpp low detect, operation "
+ "aborted\n");
+ if (dsr & DSR_PSS)
+ printk(KERN_NOTICE"DSR.2: (1) Program suspended\n");
+ if (dsr & DSR_DPS)
+ printk(KERN_NOTICE"DSR.1: (1) Aborted Erase/Program attempt "
+ "on locked block\n");
+}
+#endif /* __LINUX_MTD_PFOW_H */
LPDDR chips use PFOW window for sending commands, reading status and capabilites requesting. This pfow.h - contains definitions for PFOW window fileds, possible commands, error flags and some common macro function to avoid code duplications. Signed-off-by: Alexey Korolev <akorolev@infradead.org> ---