@@ -116,6 +116,7 @@ tests/ubi-tests/ubi-stress-test.sh
tests/ubifs_tools-tests/lib/common.sh
tests/ubifs_tools-tests/fsck_tests/authentication_refuse.sh
tests/ubifs_tools-tests/fsck_tests/cycle_mount_fsck_check.sh
+tests/ubifs_tools-tests/fsck_tests/powercut_fsck_mount.sh
#
# Files generated by autotools
@@ -292,7 +292,8 @@ AC_CONFIG_FILES([tests/fs-tests/fs_help_all.sh
tests/ubi-tests/ubi-stress-test.sh
tests/ubifs_tools-tests/lib/common.sh
tests/ubifs_tools-tests/fsck_tests/authentication_refuse.sh
- tests/ubifs_tools-tests/fsck_tests/cycle_mount_fsck_check.sh])
+ tests/ubifs_tools-tests/fsck_tests/cycle_mount_fsck_check.sh
+ tests/ubifs_tools-tests/fsck_tests/powercut_fsck_mount.sh])
AC_OUTPUT([Makefile])
@@ -1,4 +1,5 @@
test_SCRIPTS += \
tests/ubifs_tools-tests/lib/common.sh \
tests/ubifs_tools-tests/fsck_tests/authentication_refuse.sh \
- tests/ubifs_tools-tests/fsck_tests/cycle_mount_fsck_check.sh
+ tests/ubifs_tools-tests/fsck_tests/cycle_mount_fsck_check.sh \
+ tests/ubifs_tools-tests/fsck_tests/powercut_fsck_mount.sh
new file mode 100755
@@ -0,0 +1,144 @@
+#!/bin/sh
+# Copyright (c), 2024, Huawei Technologies Co, Ltd.
+# Author: Zhihao Cheng <chengzhihao1@huawei.com>
+#
+# Test Description:
+# For many kinds of flash, do following things
+# 1. mount UBIFS
+# 2. fsstress & powercut & unmount
+# 3. fsck UBIFS
+# 4. check UBIFS mounting result
+# Running time: 1h
+
+TESTBINDIR=@TESTBINDIR@
+source $TESTBINDIR/common.sh
+
+function run_test()
+{
+ local simulator="$1";
+ local size="$2";
+ local peb_size="$3";
+ local page_size="$4";
+ local encryption=$5;
+
+ echo "======================================================================"
+ printf "%s" "$simulator: ${size}MiB PEB size ${peb_size}KiB"
+ if [ "$simulator" = "nandsim" ]; then
+ printf " %s" "page size ${page_size}Bytes"
+ fi
+ printf " $encryption\n"
+
+ if [ "$simulator" = "nandsim" ]; then
+ $TESTBINDIR/load_nandsim.sh "$size" "$peb_size" "$page_size" || echo "cannot load nandsim";
+ mtdnum="$(find_mtd_device "$nandsim_patt")"
+ elif [ "$simulator" = "mtdram" ]; then
+ load_mtdram "$size" "$peb_size" || echo "cannot load mtdram"
+ mtdnum="$(find_mtd_device "$mtdram_patt")"
+ else
+ fatal "$simulator is not supported"
+ fi
+
+ flash_eraseall /dev/mtd$mtdnum
+ modprobe ubi mtd="$mtdnum,$page_size" || fatal "modprobe ubi fail"
+ ubimkvol -N vol_test -m -n 0 /dev/ubi$UBI_NUM || fatal "mkvol fail"
+ modprobe ubifs || fatal "modprobe ubifs fail"
+ mount_ubifs $DEV $MNT || fatal "mount ubifs fail"
+ if [[ "$encryption" == "encrypted" ]]; then
+ encryption_gen_key
+ encryption_set_key $MNT
+ fi
+
+ fsstress -d $MNT -l0 -p4 -n10000 &
+ sleep $((RANDOM % 120))
+ powercut
+
+ ps -e | grep -w fsstress > /dev/null 2>&1
+ while [ $? -eq 0 ]
+ do
+ killall -9 fsstress > /dev/null 2>&1
+ sleep 1
+ ps -e | grep -w fsstress > /dev/null 2>&1
+ done
+
+ while true
+ do
+ res=`mount | grep "$MNT"`
+ if [[ "$res" == "" ]]
+ then
+ break;
+ fi
+ umount $MNT
+ sleep 0.1
+ done
+
+ fsck.ubifs -a $DEV 2>&1 > $LOG_FILE
+ res=$?
+ cat $LOG_FILE
+ if [[ $res != $FSCK_OK ]]
+ then
+ # Powercut during layout_leb_in_gaps may change index LEBs
+ # without updating LPT.
+ log=`cat $LOG_FILE | grep "Inconsistent properties" | grep "is_idx 1"`
+ if [[ "$log" == "" ]]; then
+ fatal "fsck fail $res"
+ fi
+ if [[ $res != $FSCK_NONDESTRUCT ]]; then
+ fatal "fsck fail $res"
+ fi
+ fi
+
+ dmesg -c > /dev/null # powercut could reproduce error messages
+
+ enable_chkfs
+
+ mount_ubifs $DEV $MNT "noauthentication" "noatime"
+ res=$?
+ if [[ $res != 0 ]]
+ then
+ fatal "mount fail $res"
+ fi
+
+ if [[ "$encryption" == "encrypted" ]]; then
+ encryption_set_key $MNT
+ fi
+
+ du -sh $MNT > /dev/null # Make sure all files are accessible
+ ret=$?
+ if [[ $ret != 0 ]]; then
+ fatal "Cannot access all files"
+ fi
+ check_err_msg
+
+ umount $MNT
+ res=$?
+ if [[ $res != 0 ]]
+ then
+ fatal "unmount fail $res"
+ fi
+
+ check_err_msg
+
+ modprobe -r ubifs
+ modprobe -r ubi
+ modprobe -r $simulator
+
+ echo "----------------------------------------------------------------------"
+}
+
+check_fsstress
+start_t=$(date +%s)
+echo "Do powercut+fsck+mount test in kinds of flashes"
+for simulator in "mtdram" "nandsim"; do
+ for encryption in "encrypted" "noencrypted"; do
+ run_test "$simulator" "16" "16" "512" $encryption
+ run_test "$simulator" "64" "16" "512" $encryption
+ run_test "$simulator" "128" "64" "2048" $encryption
+ run_test "$simulator" "256" "128" "2048" $encryption
+ run_test "$simulator" "512" "128" "2048" $encryption
+ run_test "$simulator" "1024" "512" "2048" $encryption
+ done
+done
+end_t=$(date +%s)
+time_cost=$(( end_t - start_t ))
+echo "Success, cost $time_cost seconds"
+exit 0
Inject powercut while doing fsstress on mounted UBIFS for kinds of flashes (eg. nand, nor). This testcase mainly makes sure that fsck.ubifs can make UBIFS image be consistent on different flashes (eg. nand, nor). Because the min_io_size of nor flash is 1, the UBIFS image on nor flash will be different from nand flash after doing powercut, so we need make sure fsck.ubifs can handle these two types of flash. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> --- .gitignore | 1 + configure.ac | 3 +- tests/ubifs_tools-tests/Makemodule.am | 3 +- .../fsck_tests/powercut_fsck_mount.sh.in | 144 +++++++++++++++++++++ 4 files changed, 149 insertions(+), 2 deletions(-) create mode 100755 tests/ubifs_tools-tests/fsck_tests/powercut_fsck_mount.sh.in