diff mbox series

[v5,05/12] arm64: dts: broadcom: bcmbca: Add NAND controller node

Message ID 20240207202257.271784-6-william.zhang@broadcom.com
State New
Headers show
Series mtd: rawnand: brcmnand: driver and doc updates | expand

Commit Message

William Zhang Feb. 7, 2024, 8:22 p.m. UTC
Add support for Broadcom STB NAND controller in BCMBCA ARMv8 chip dts
files.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: David Regan <dregan@broadcom.com>

---

Changes in v5: None
Changes in v4:
- Move the board related dts setting from SoC dtsi to board dts

Changes in v3: None
Changes in v2:
- Add nand controller node label for 4908 so it is consistent with other
SoCs and can be referenced by board dts file

 arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi  |  4 ++--
 arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi  | 14 ++++++++++++++
 arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi | 14 ++++++++++++++
 arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi | 14 ++++++++++++++
 arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi  | 14 ++++++++++++++
 arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi  | 14 ++++++++++++++
 arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi  | 14 ++++++++++++++
 arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts  | 10 ++++++++++
 arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts  | 10 ++++++++++
 arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts | 10 ++++++++++
 arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts | 10 ++++++++++
 arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts  | 10 ++++++++++
 arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts  | 10 ++++++++++
 arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts  | 10 ++++++++++
 14 files changed, 156 insertions(+), 2 deletions(-)

Comments

Rafał Miłecki Feb. 22, 2024, 8:27 a.m. UTC | #1
On 2024-02-07 21:22, William Zhang wrote:
> diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
> b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
> index 2f124b027bbf..336016e334d9 100644
> --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
> +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
> @@ -589,7 +589,7 @@ hsspi: spi@1000 {
>  			status = "disabled";
>  		};
> 
> -		nand-controller@1800 {
> +		nand_controller: nand-controller@1800 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", 
> "brcm,brcmnand";
> @@ -597,7 +597,7 @@ nand-controller@1800 {
>  			reg-names = "nand", "nand-int-base";
>  			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "nand_ctlrdy";
> -			status = "okay";
> +			status = "disabled";
> 
>  			nandcs: nand@0 {
>  				compatible = "brcm,nandcs";

You disable NAND controller here breaking support for all dependant
devices.

I see you fix it afterwards in PATCH 06/12 but it's still a poor way of
handling such change and this issue can be hit e.g. during git bisect.

Also: given that 99% of BCM4908 devices use NAND controller can we just
save ourselves efforts and keep it enabled in .dtsi?
William Zhang Feb. 22, 2024, 4:21 p.m. UTC | #2
Hi Rafal,

On 2/22/24 00:27, Rafał Miłecki wrote:
> On 2024-02-07 21:22, William Zhang wrote:
>> diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
>> b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
>> index 2f124b027bbf..336016e334d9 100644
>> --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
>> +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
>> @@ -589,7 +589,7 @@ hsspi: spi@1000 {
>>              status = "disabled";
>>          };
>>
>> -        nand-controller@1800 {
>> +        nand_controller: nand-controller@1800 {
>>              #address-cells = <1>;
>>              #size-cells = <0>;
>>              compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", 
>> "brcm,brcmnand";
>> @@ -597,7 +597,7 @@ nand-controller@1800 {
>>              reg-names = "nand", "nand-int-base";
>>              interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
>>              interrupt-names = "nand_ctlrdy";
>> -            status = "okay";
>> +            status = "disabled";
>>
>>              nandcs: nand@0 {
>>                  compatible = "brcm,nandcs";
> 
> You disable NAND controller here breaking support for all dependant
> devices.
> 
> I see you fix it afterwards in PATCH 06/12 but it's still a poor way of
> handling such change and this issue can be hit e.g. during git bisect.
> 
> Also: given that 99% of BCM4908 devices use NAND controller can we just
> save ourselves efforts and keep it enabled in .dtsi?
> 
I was trying to fix this according to the dts convention per 
maintainers' requirement(only enable the node in the board dts, not soc 
include). We have 100% of BCMBCA devices use strap for ecc but we still 
have to put the property in board dts.
I understand if someone try to bisect the commits, it may hit the 
problem but this will be very obvious that controller is not even shown 
in the boot up so hopefully it is easy to figure out.  Anyway if 
maintainer(Minque and/or anyone from device tree side) is okay with your 
request, I can change it back to enable in the dtsi.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
index 2f124b027bbf..336016e334d9 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
@@ -589,7 +589,7 @@  hsspi: spi@1000 {
 			status = "disabled";
 		};
 
-		nand-controller@1800 {
+		nand_controller: nand-controller@1800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
@@ -597,7 +597,7 @@  nand-controller@1800 {
 			reg-names = "nand", "nand-int-base";
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "nand_ctlrdy";
-			status = "okay";
+			status = "disabled";
 
 			nandcs: nand@0 {
 				compatible = "brcm,nandcs";
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
index d658c81f7285..14b2adfb817c 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
@@ -138,6 +138,20 @@  hsspi: spi@1000 {
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
index 4f474d47022e..589b8a1efc72 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
@@ -119,6 +119,20 @@  hsspi: spi@1000 {
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
index 909f254dc47d..48d618e75866 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
@@ -137,6 +137,20 @@  hsspi: spi@1000 {
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
index 685ae32951c9..1d1303cf90f3 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
@@ -138,6 +138,20 @@  hsspi: spi@1000 {
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
index 820553ce541b..00c62c1e5df0 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
@@ -119,5 +119,19 @@  hsspi: spi@1000 {
 			num-cs = <8>;
 			status = "disabled";
 		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
index 0eb93c298297..caeaf428dc15 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
@@ -156,5 +156,19 @@  hsspi: spi@1000 {
 			num-cs = <8>;
 			status = "disabled";
 		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
index c4e6e71f6310..030ffa5364fb 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
@@ -32,3 +32,13 @@  &uart0 {
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
index e69cd683211a..4b779e6c22e1 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
@@ -32,3 +32,13 @@  &uart0 {
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
index db2c82d6dfd8..2851e8e41bf4 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
@@ -32,3 +32,13 @@  &uart0 {
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
index 25c12bc63545..17dc594fe83f 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
@@ -32,3 +32,13 @@  &uart0 {
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
index faba21f03120..34832a734734 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
@@ -32,3 +32,13 @@  &uart0 {
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
index 9808331eede2..e1396b5544b7 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
@@ -32,3 +32,13 @@  &uart0 {
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
index 1f561c8e13b0..30bbf6f2917e 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
@@ -32,3 +32,13 @@  &uart0 {
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};