@@ -118,6 +118,7 @@ tests/ubifs_repair-tests/tests/cycle_mount_repair_check.sh
tests/ubifs_repair-tests/tests/powercut_repair_mount.sh
tests/ubifs_repair-tests/tests/cycle_corrupted_repair_fault_inject.sh
tests/ubifs_repair-tests/tests/cycle_powercut_mount_repair.sh
+tests/ubifs_repair-tests/tests/random_corrupted_repair.sh
#
# Files generated by autotools
@@ -360,6 +360,7 @@ AC_CONFIG_FILES([tests/fs-tests/fs_help_all.sh
tests/ubifs_repair-tests/tests/cycle_mount_repair_check.sh
tests/ubifs_repair-tests/tests/powercut_repair_mount.sh
tests/ubifs_repair-tests/tests/cycle_corrupted_repair_fault_inject.sh
- tests/ubifs_repair-tests/tests/cycle_powercut_mount_repair.sh])
+ tests/ubifs_repair-tests/tests/cycle_powercut_mount_repair.sh
+ tests/ubifs_repair-tests/tests/random_corrupted_repair.sh])
AC_OUTPUT([Makefile])
@@ -4,4 +4,5 @@ test_SCRIPTS += \
tests/ubifs_repair-tests/tests/cycle_mount_repair_check.sh \
tests/ubifs_repair-tests/tests/powercut_repair_mount.sh \
tests/ubifs_repair-tests/tests/cycle_corrupted_repair_fault_inject.sh \
- tests/ubifs_repair-tests/tests/cycle_powercut_mount_repair.sh
+ tests/ubifs_repair-tests/tests/cycle_powercut_mount_repair.sh \
+ tests/ubifs_repair-tests/tests/random_corrupted_repair.sh
new file mode 100755
@@ -0,0 +1,205 @@
+#!/bin/sh
+# Copyright (c), 2023-2024, Huawei Technologies Co, Ltd.
+# Author: Zhihao Cheng <chengzhihao1@huawei.com>
+#
+# Test Description:
+# For many kinds of flash, do following things
+# 1. mount UBIFS
+# 2. fsstress && unmount
+# 3. inject corruption into UBIFS image randomly
+# 3. repair ubifs
+# 4. check UBIFS mounting result
+# Running time: 10h
+
+TESTBINDIR=@TESTBINDIR@
+source $TESTBINDIR/common.sh
+
+function run_test()
+{
+ local simulator="$1";
+ local size="$2";
+ local peb_size="$3";
+ local page_size="$4";
+ local encryption=$5;
+
+ echo "======================================================================"
+ printf "%s" "$simulator: ${size}MiB PEB size ${peb_size}KiB"
+ if [ "$simulator" = "nandsim" ]; then
+ printf " %s" "page size ${page_size}KiB"
+ fi
+ printf " $encryption\n"
+
+ if [ "$simulator" = "nandsim" ]; then
+ $TESTBINDIR/load_nandsim.sh "$size" "$peb_size" "$page_size" || echo "cannot load nandsim";
+ mtdnum="$(find_mtd_device "$nandsim_patt")"
+ elif [ "$simulator" = "mtdram" ]; then
+ load_mtdram "$size" "$peb_size" || echo "cannot load mtdram"
+ mtdnum="$(find_mtd_device "$mtdram_patt")"
+ else
+ fatal "$simulator is not supported"
+ fi
+
+ flash_eraseall /dev/mtd$mtdnum
+ modprobe ubi mtd="$mtdnum,$page_size,0,0,1" fm_autoconvert || fatal "modprobe ubi fail"
+ ubimkvol -N vol_test -m -n 0 /dev/ubi$UBI_NUM || fatal "mkvol fail"
+ modprobe ubifs || fatal "modprobe ubifs fail"
+ mount_ubifs $DEV $MNT || fatal "mount ubifs fail"
+ if [[ "$encryption" == "encrypted" ]]; then
+ encryption_gen_key
+ encryption_set_key $MNT
+ fi
+
+ fsstress -d $MNT -l0 -p4 -n10000 &
+
+ while true;
+ do
+ per=`df -Th | grep ubifs | awk '{print $6}'`;
+ if [[ ${per%?} -gt 95 ]]; then
+ # Used > 95%
+ break;
+ fi
+ done
+
+ ps -e | grep -w fsstress > /dev/null 2>&1
+ while [ $? -eq 0 ]
+ do
+ killall -9 fsstress > /dev/null 2>&1
+ sleep 1
+ ps -e | grep -w fsstress > /dev/null 2>&1
+ done
+
+ while true
+ do
+ res=`mount | grep "$MNT"`
+ if [[ "$res" == "" ]]
+ then
+ break;
+ fi
+ umount $MNT
+ sleep 0.1
+ done
+
+ # injection
+ times=$((RANDOM % 10))
+ let times=$times+10
+ i=0
+ tot_peb=`cat /sys/class/ubi/ubi$UBI_NUM/total_eraseblocks`;
+
+ modprobe -r ubifs
+ modprobe -r ubi # Stop wear-leveling & erasing worker
+ while [[ $i -lt $times ]]
+ do
+ let i=$i+1;
+ peb=$((RANDOM % $tot_peb));
+ pg=`expr $peb_size \* 1024`;
+ peb_off=`expr $pg \* $peb`
+ pages=`expr $pg / $page_size`;
+ pg=`expr $pages - 2`;
+ pg=$((RANDOM % $pg));
+ pg_off=`expr $pg + 2`;
+ pg_start=`expr $pages \* $peb`;
+ pg=`expr $pg_start + $pg_off`;
+ vid_pg=`expr $pg_start + 1`;
+ dd if=/dev/mtd$mtdnum of=$TMP_FILE bs=$page_size skip=$vid_pg count=1 2>/dev/null;
+ content=`cat $TMP_FILE | grep UBI!`; # vid header magic
+ if [[ "$content" == "" ]]; then
+ # Skip free PEB, otherwise data could be overwritten in ubifs repairing process
+ continue;
+ fi
+ if [[ $((RANDOM % 2)) == 0 ]]; then
+ # Corrupts 1 page
+ dd if=/dev/urandom of=/dev/mtd$mtdnum bs=$page_size seek=$pg count=1;
+ else
+ # Erase 1 LEB, TNC points to an unmapped area
+ flash_erase /dev/mtd$mtdnum $peb_off 1
+ fi
+ done
+ rm -f $TMP_FILE 2>/dev/null
+ sync
+
+ skip=0
+ modprobe ubi mtd="$mtdnum,$page_size,0,0,1" fm_autoconvert
+ ret=$?
+ if [[ $ret != 0 ]]
+ then
+ skip=1
+ echo "UBI layout volume is corrupted, skip"
+ fi
+
+ if [[ $skip == 0 ]]; then
+ modprobe ubifs || fatal "modprobe ubifs2 fail"
+ dmesg -c > /dev/null
+ echo 'format "UBIFS DBG repair" +pflmt' > /sys/kernel/debug/dynamic_debug/control
+ echo "$DEV" > /sys/kernel/debug/ubifs/repair_fs
+ res=$?
+ if [[ $res != 0 ]]
+ then
+ log=`dmesg | grep "bad node at LEB 0:"`
+ if [[ "$log" != "" ]]
+ then
+ skip=1
+ echo "SB is corrupted, skip repairing & mounting"
+ else
+ fatal "repair fail $res"
+ fi
+ fi
+
+ check_memleak
+
+ if [[ $skip == 0 ]]; then
+ dmesg -c > /dev/null # repairing corrupted image could reproduce error messages
+
+ enable_chkfs
+
+ mount_ubifs $DEV $MNT
+ res=$?
+ if [[ $res != 0 ]]
+ then
+ fatal "mount fail $res"
+ fi
+
+ if [[ "$encryption" == "encrypted" ]]; then
+ encryption_set_key $MNT
+ fi
+
+ du -sh $MNT > /dev/null # Make sure all files are accessible
+ ret=$?
+ if [[ $ret != 0 ]]; then
+ fatal "Cannot access all files"
+ fi
+ # check_err_msg is not suggested in this testcase, because
+ # ubi_io_read(triggered by wear_leveling_worker -> ubi_eba_copy_leb)
+ # could print stack if ecc uncorrectable errors are detected.
+
+ umount $MNT
+ res=$?
+ if [[ $res != 0 ]]
+ then
+ fatal "unmount fail $res"
+ fi
+ fi
+ modprobe -r ubifs
+ modprobe -r ubi
+ fi
+ modprobe -r $simulator
+
+ echo "----------------------------------------------------------------------"
+}
+
+check_fsstress
+start_t=$(date +%s)
+echo "Do random_corrruption+repair+mount test in kinds of flashes"
+for simulator in "mtdram" "nandsim"; do
+ for encryption in "encrypted" "noencrypted"; do
+ run_test "$simulator" "16" "16" "512" $encryption
+ run_test "$simulator" "64" "16" "512" $encryption
+ run_test "$simulator" "128" "64" "2048" $encryption
+ run_test "$simulator" "256" "128" "2048" $encryption
+ run_test "$simulator" "512" "128" "2048" $encryption
+ run_test "$simulator" "1024" "512" "2048" $encryption
+ done
+done
+end_t=$(date +%s)
+time_cost=$(( end_t - start_t ))
+echo "Success, cost $time_cost seconds"
+exit 0
Inject random corruption on UBIFS image by writting random data on kinds of mtd devices (eg. nand, nor), check the consistency of UBIFS after repairing. This testcase simulate random bad UBIFS image caused by hardware exceptions(eg. ecc uncorrectable, unwritten), and makes sure that ubifs_repair could make UBIFS be consistent after repairing UBIFS image. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> --- .gitignore | 1 + configure.ac | 3 +- tests/ubifs_repair-tests/Makemodule.am | 3 +- .../tests/random_corrupted_repair.sh.in | 205 +++++++++++++++++++++ 4 files changed, 210 insertions(+), 2 deletions(-) create mode 100755 tests/ubifs_repair-tests/tests/random_corrupted_repair.sh.in