diff mbox series

[4/5] platform/x86: int3472/discrete: use gpiod_set_active_low()

Message ID 20230913115001.23183-5-brgl@bgdev.pl
State New
Headers show
Series gpio: remove gpiod_toggle_active_low() | expand

Commit Message

Bartosz Golaszewski Sept. 13, 2023, 11:50 a.m. UTC
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Use the new polarity setter instead of the more cumbersome toggle
function.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/platform/x86/intel/int3472/clk_and_regulator.c | 2 +-
 drivers/platform/x86/intel/int3472/led.c               | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

Comments

Hans de Goede Sept. 13, 2023, 2:50 p.m. UTC | #1
Hi,

On 9/13/23 13:50, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> Use the new polarity setter instead of the more cumbersome toggle
> function.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
>  drivers/platform/x86/intel/int3472/clk_and_regulator.c | 2 +-
>  drivers/platform/x86/intel/int3472/led.c               | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/platform/x86/intel/int3472/clk_and_regulator.c b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
> index ef4b3141efcd..31e520838b95 100644
> --- a/drivers/platform/x86/intel/int3472/clk_and_regulator.c
> +++ b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
> @@ -183,7 +183,7 @@ int skl_int3472_register_gpio_clock(struct int3472_discrete_device *int3472,
>  	}
>  
>  	if (polarity == GPIO_ACTIVE_LOW)
> -		gpiod_toggle_active_low(int3472->clock.ena_gpio);
> +		gpiod_set_active_low(int3472->clock.ena_gpio);
>  
>  	/* Ensure the pin is in output mode and non-active state */
>  	gpiod_direction_output(int3472->clock.ena_gpio, 0);
> diff --git a/drivers/platform/x86/intel/int3472/led.c b/drivers/platform/x86/intel/int3472/led.c
> index bca1ce7d0d0c..46c9c569df5e 100644
> --- a/drivers/platform/x86/intel/int3472/led.c
> +++ b/drivers/platform/x86/intel/int3472/led.c
> @@ -32,7 +32,7 @@ int skl_int3472_register_pled(struct int3472_discrete_device *int3472,
>  				     "getting privacy LED GPIO\n");
>  
>  	if (polarity == GPIO_ACTIVE_LOW)
> -		gpiod_toggle_active_low(int3472->pled.gpio);
> +		gpiod_set_active_low(int3472->pled.gpio);
>  
>  	/* Ensure the pin is in output mode and non-active state */
>  	gpiod_direction_output(int3472->pled.gpio, 0);


Thanks. I agree that the new API is much better:

Acked-by: Hans de Goede <hdegoede@redhat.com>

Feel free to merge this through the GPIO tree.

Regards,

Hans
diff mbox series

Patch

diff --git a/drivers/platform/x86/intel/int3472/clk_and_regulator.c b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
index ef4b3141efcd..31e520838b95 100644
--- a/drivers/platform/x86/intel/int3472/clk_and_regulator.c
+++ b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
@@ -183,7 +183,7 @@  int skl_int3472_register_gpio_clock(struct int3472_discrete_device *int3472,
 	}
 
 	if (polarity == GPIO_ACTIVE_LOW)
-		gpiod_toggle_active_low(int3472->clock.ena_gpio);
+		gpiod_set_active_low(int3472->clock.ena_gpio);
 
 	/* Ensure the pin is in output mode and non-active state */
 	gpiod_direction_output(int3472->clock.ena_gpio, 0);
diff --git a/drivers/platform/x86/intel/int3472/led.c b/drivers/platform/x86/intel/int3472/led.c
index bca1ce7d0d0c..46c9c569df5e 100644
--- a/drivers/platform/x86/intel/int3472/led.c
+++ b/drivers/platform/x86/intel/int3472/led.c
@@ -32,7 +32,7 @@  int skl_int3472_register_pled(struct int3472_discrete_device *int3472,
 				     "getting privacy LED GPIO\n");
 
 	if (polarity == GPIO_ACTIVE_LOW)
-		gpiod_toggle_active_low(int3472->pled.gpio);
+		gpiod_set_active_low(int3472->pled.gpio);
 
 	/* Ensure the pin is in output mode and non-active state */
 	gpiod_direction_output(int3472->pled.gpio, 0);