@@ -76,6 +76,8 @@ &mscc_felix_port0 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy0>;
phy-mode = "qsgmii";
+ nvmem-cells = <&base_mac_address 4>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -84,6 +86,8 @@ &mscc_felix_port1 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy1>;
phy-mode = "qsgmii";
+ nvmem-cells = <&base_mac_address 5>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -92,6 +96,8 @@ &mscc_felix_port2 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy2>;
phy-mode = "qsgmii";
+ nvmem-cells = <&base_mac_address 6>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -100,6 +106,8 @@ &mscc_felix_port3 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy3>;
phy-mode = "qsgmii";
+ nvmem-cells = <&base_mac_address 7>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -55,5 +55,7 @@ &enetc_port0 {
&enetc_port1 {
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
+ nvmem-cells = <&base_mac_address 0>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -48,6 +48,8 @@ &mscc_felix_port0 {
managed = "in-band-status";
phy-handle = <&phy0>;
phy-mode = "sgmii";
+ nvmem-cells = <&base_mac_address 0>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -56,6 +58,8 @@ &mscc_felix_port1 {
managed = "in-band-status";
phy-handle = <&phy1>;
phy-mode = "sgmii";
+ nvmem-cells = <&base_mac_address 1>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -43,5 +43,7 @@ vddh: vddh-regulator {
&enetc_port1 {
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
+ nvmem-cells = <&base_mac_address 1>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -92,6 +92,8 @@ &enetc_port0 {
phy-handle = <&phy0>;
phy-mode = "sgmii";
managed = "in-band-status";
+ nvmem-cells = <&base_mac_address 0>;
+ nvmem-cell-names = "mac-address";
status = "okay";
};
@@ -154,6 +156,17 @@ partition@3e0000 {
label = "bootloader environment";
};
};
+
+ otp-1 {
+ compatible = "kontron,sl28-vpd", "user-otp";
+
+ serial_number: serial-number {
+ };
+
+ base_mac_address: base-mac-address {
+ #nvmem-cell-cells = <1>;
+ };
+ };
};
};
Now that it is finally possible to get the MAC addresses from the OTP memory, use it to set the addresses of the network devices. There are 8 reserved MAC addresses in total per board. Distribute them as follows: +----------+------+------+------+------+------+ | | var1 | var2 | var3 | var4 | kbox | +----------+------+------+------+------+------+ | enetc #0 | +0 | | | +0 | +0 | | enetc #1 | | | +0 | +1 | +1 | | enetc #2 | rand | rand | rand | rand | rand | | enetc #3 | | | | | | | felix p0 | | +0 | | | +4 | | felix p1 | | +1 | | | +5 | | felix p2 | | | | | +6 | | felix p3 | | | | | +7 | | felix p4 | | | | | | | felix p5 | | | | | | +----------+------+------+------+------+------+ An empty cell means, the port is not available and thus doesn't need an ethernet address. Signed-off-by: Michael Walle <michael@walle.cc> --- .../freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts | 8 ++++++++ .../dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts | 2 ++ .../dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts | 4 ++++ .../dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts | 2 ++ .../boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts | 13 +++++++++++++ 5 files changed, 29 insertions(+)