@@ -570,36 +570,6 @@ static int spansion_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
return ret;
}
-/**
- * spi_nor_write_ear() - Write Extended Address Register.
- * @nor: pointer to 'struct spi_nor'.
- * @ear: value to write to the Extended Address Register.
- *
- * Return: 0 on success, -errno otherwise.
- */
-int spi_nor_write_ear(struct spi_nor *nor, u8 ear)
-{
- int ret;
-
- nor->bouncebuf[0] = ear;
-
- if (nor->spimem) {
- struct spi_mem_op op = SPI_NOR_WREAR_OP(nor->bouncebuf);
-
- spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_WREAR,
- nor->bouncebuf, 1);
- }
-
- if (ret)
- dev_dbg(nor->dev, "error %d writing EAR\n", ret);
-
- return ret;
-}
-
/**
* spi_nor_sr_ready() - Query the Status Register to see if the flash is ready
* for new commands.
@@ -72,12 +72,6 @@
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_DATA_OUT(1, buf, 0))
-#define SPI_NOR_WREAR_OP(buf) \
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREAR, 0), \
- SPI_MEM_OP_NO_ADDR, \
- SPI_MEM_OP_NO_DUMMY, \
- SPI_MEM_OP_DATA_OUT(1, buf, 0))
-
#define SPI_NOR_GBULK_OP \
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_GBULK, 0), \
SPI_MEM_OP_NO_ADDR, \
@@ -635,7 +629,6 @@ void spi_nor_spimem_setup_op(const struct spi_nor *nor,
int spi_nor_write_enable(struct spi_nor *nor);
int spi_nor_write_disable(struct spi_nor *nor);
int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable);
-int spi_nor_write_ear(struct spi_nor *nor, u8 ear);
int spi_nor_wait_till_ready(struct spi_nor *nor);
int spi_nor_global_block_unlock(struct spi_nor *nor);
int spi_nor_lock_and_prep(struct spi_nor *nor);
@@ -8,6 +8,15 @@
#include "core.h"
+#define WINBOND_NOR_OP_RDEAR 0xc8 /* Read Extended Address Register */
+#define WINBOND_NOR_OP_WREAR 0xc5 /* Write Extended Address Register */
+
+#define WINBOND_NOR_WREAR_OP(buf) \
+ SPI_MEM_OP(SPI_MEM_OP_CMD(WINBOND_NOR_OP_WREAR, 0), \
+ SPI_MEM_OP_NO_ADDR, \
+ SPI_MEM_OP_NO_DUMMY, \
+ SPI_MEM_OP_DATA_OUT(1, buf, 0))
+
static int
w25q256_post_bfpt_fixups(struct spi_nor *nor,
const struct sfdp_parameter_header *bfpt_header,
@@ -130,6 +139,37 @@ static const struct flash_info winbond_nor_parts[] = {
SPI_NOR_QUAD_READ) },
};
+/**
+ * winbond_nor_write_ear() - Write Extended Address Register.
+ * @nor: pointer to 'struct spi_nor'.
+ * @ear: value to write to the Extended Address Register.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int winbond_nor_write_ear(struct spi_nor *nor, u8 ear)
+{
+ int ret;
+
+ nor->bouncebuf[0] = ear;
+
+ if (nor->spimem) {
+ struct spi_mem_op op = WINBOND_NOR_WREAR_OP(nor->bouncebuf);
+
+ spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = spi_nor_controller_ops_write_reg(nor,
+ WINBOND_NOR_OP_WREAR,
+ nor->bouncebuf, 1);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d writing EAR\n", ret);
+
+ return ret;
+}
+
/**
* winbond_nor_set_4byte_addr_mode() - Set 4-byte address mode for Winbond
* flashes.
@@ -156,7 +196,7 @@ static int winbond_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
if (ret)
return ret;
- ret = spi_nor_write_ear(nor, 0);
+ ret = winbond_nor_write_ear(nor, 0);
if (ret)
return ret;
@@ -47,8 +47,6 @@
#define SPINOR_OP_RDID 0x9f /* Read JEDEC ID */
#define SPINOR_OP_RDSFDP 0x5a /* Read SFDP */
#define SPINOR_OP_RDCR 0x35 /* Read configuration register */
-#define SPINOR_OP_RDEAR 0xc8 /* Read Extended Address Register */
-#define SPINOR_OP_WREAR 0xc5 /* Write Extended Address Register */
#define SPINOR_OP_SRSTEN 0x66 /* Software Reset Enable */
#define SPINOR_OP_SRST 0x99 /* Software Reset */
#define SPINOR_OP_GBULK 0x98 /* Global Block Unlock */
The "Extended Address Register" is winbond specific. If the flash is larger than 16MiB and is used in 3 byte address mode, it is used to set the remaining address bits. Move the write_ear() function, the opcode macros and the spimem op template into the winbond module and rename them accordingly. Signed-off-by: Michael Walle <michael@walle.cc> --- changes since v1: - rebase to latest next - also move the opcode defines drivers/mtd/spi-nor/core.c | 30 ------------------------- drivers/mtd/spi-nor/core.h | 7 ------ drivers/mtd/spi-nor/winbond.c | 42 ++++++++++++++++++++++++++++++++++- include/linux/mtd/spi-nor.h | 2 -- 4 files changed, 41 insertions(+), 40 deletions(-)