Message ID | 20210527084959.1548-1-patrice.chotard@foss.st.com |
---|---|
State | Changes Requested |
Headers | show |
Series | [v2] mtd: spinand: add SPI-NAND MTD resume handler | expand |
Hi Patrice, <patrice.chotard@foss.st.com> wrote on Thu, 27 May 2021 10:49:59 +0200: > From: Patrice Chotard <patrice.chotard@foss.st.com> > > After power up, all SPI NAND's blocks are locked. Only read operations > are allowed, write and erase operations are forbidden. > The SPI NAND framework unlocks all the blocks during its initialization. > > During a standby low power, the memory is powered down, losing its > configuration. > During the resume, the QSPI driver state is restored but the SPI NAND > framework does not reconfigured the memory. > > This patch adds SPI-NAND MTD PM handlers for resume ops. > SPI NAND resume op re-initializes SPI NAND flash to its probed state. > > It also adds a new helper spinand_block_unlock() which is > called in spinand_init() and in spinand_mtd_resume(). > > Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> > Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> > --- > Changes in v2: > - Add helper spinand_block_unlock(). > - Add spinand_ecc_enable() call. > - Remove some dev_err(). > - Fix commit's title and message. > > drivers/mtd/nand/spi/core.c | 62 +++++++++++++++++++++++++++++++------ > 1 file changed, 53 insertions(+), 9 deletions(-) > > diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c > index 17f63f95f4a2..f77aeff11f43 100644 > --- a/drivers/mtd/nand/spi/core.c > +++ b/drivers/mtd/nand/spi/core.c > @@ -1074,6 +1074,55 @@ static int spinand_detect(struct spinand_device *spinand) > return 0; > } > > +static int spinand_block_unlock(struct spinand_device *spinand) > +{ > + struct device *dev = &spinand->spimem->spi->dev; > + struct nand_device *nand = spinand_to_nand(spinand); > + int ret = 0, i; > + > + for (i = 0; i < nand->memorg.ntargets; i++) { > + ret = spinand_select_target(spinand, i); > + if (ret) > + return ret; > + > + ret = spinand_lock_block(spinand, BL_ALL_UNLOCKED); > + if (ret) > + return ret; > + } > + > + return ret; > +} Please insert this helper (and use it in the probe) in a separate patch, so that patch 2/2 only implements the _resume hook. > + > +static void spinand_mtd_resume(struct mtd_info *mtd) > +{ > + struct spinand_device *spinand = mtd_to_spinand(mtd); > + struct nand_device *nand = mtd_to_nanddev(mtd); > + struct device *dev = &spinand->spimem->spi->dev; > + int ret; > + > + ret = spinand_reset_op(spinand); > + if (ret) > + return; > + > + ret = spinand_init_quad_enable(spinand); > + if (ret) > + return; > + > + ret = spinand_upd_cfg(spinand, CFG_OTP_ENABLE, 0); > + if (ret) > + return; > + > + ret = spinand_manufacturer_init(spinand); > + if (ret) > + return; > + > + ret = spinand_block_unlock(spinand); > + if (ret) > + return; > + > + spinand_ecc_enable(spinand, false); > +} > + > static int spinand_init(struct spinand_device *spinand) > { > struct device *dev = &spinand->spimem->spi->dev; > @@ -1137,15 +1186,9 @@ static int spinand_init(struct spinand_device *spinand) > } > > /* After power up, all blocks are locked, so unlock them here. */ > - for (i = 0; i < nand->memorg.ntargets; i++) { > - ret = spinand_select_target(spinand, i); > - if (ret) > - goto err_manuf_cleanup; > - > - ret = spinand_lock_block(spinand, BL_ALL_UNLOCKED); > - if (ret) > - goto err_manuf_cleanup; > - } > + ret = spinand_block_unlock(spinand); > + if ret) I doubt this as even be build-tested :) > + goto err_manuf_cleanup; > > ret = nanddev_init(nand, &spinand_ops, THIS_MODULE); > if (ret) > @@ -1167,6 +1210,7 @@ static int spinand_init(struct spinand_device *spinand) > mtd->_block_isreserved = spinand_mtd_block_isreserved; > mtd->_erase = spinand_mtd_erase; > mtd->_max_bad_blocks = nanddev_mtd_max_bad_blocks; > + mtd->_resume = spinand_mtd_resume; > > if (nand->ecc.engine) { > ret = mtd_ooblayout_count_freebytes(mtd); Thanks, Miquèl
Hi Miquel On 5/27/21 10:53 AM, Miquel Raynal wrote: > Hi Patrice, > > <patrice.chotard@foss.st.com> wrote on Thu, 27 May 2021 10:49:59 +0200: > >> From: Patrice Chotard <patrice.chotard@foss.st.com> >> >> After power up, all SPI NAND's blocks are locked. Only read operations >> are allowed, write and erase operations are forbidden. >> The SPI NAND framework unlocks all the blocks during its initialization. >> >> During a standby low power, the memory is powered down, losing its >> configuration. >> During the resume, the QSPI driver state is restored but the SPI NAND >> framework does not reconfigured the memory. >> >> This patch adds SPI-NAND MTD PM handlers for resume ops. >> SPI NAND resume op re-initializes SPI NAND flash to its probed state. >> >> It also adds a new helper spinand_block_unlock() which is >> called in spinand_init() and in spinand_mtd_resume(). >> >> Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> >> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> >> --- >> Changes in v2: >> - Add helper spinand_block_unlock(). >> - Add spinand_ecc_enable() call. >> - Remove some dev_err(). >> - Fix commit's title and message. >> >> drivers/mtd/nand/spi/core.c | 62 +++++++++++++++++++++++++++++++------ >> 1 file changed, 53 insertions(+), 9 deletions(-) >> >> diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c >> index 17f63f95f4a2..f77aeff11f43 100644 >> --- a/drivers/mtd/nand/spi/core.c >> +++ b/drivers/mtd/nand/spi/core.c >> @@ -1074,6 +1074,55 @@ static int spinand_detect(struct spinand_device *spinand) >> return 0; >> } >> >> +static int spinand_block_unlock(struct spinand_device *spinand) >> +{ >> + struct device *dev = &spinand->spimem->spi->dev; >> + struct nand_device *nand = spinand_to_nand(spinand); >> + int ret = 0, i; >> + >> + for (i = 0; i < nand->memorg.ntargets; i++) { >> + ret = spinand_select_target(spinand, i); >> + if (ret) >> + return ret; >> + >> + ret = spinand_lock_block(spinand, BL_ALL_UNLOCKED); >> + if (ret) >> + return ret; >> + } >> + >> + return ret; >> +} > > Please insert this helper (and use it in the probe) in a separate > patch, so that patch 2/2 only implements the _resume hook. ok > >> + >> +static void spinand_mtd_resume(struct mtd_info *mtd) >> +{ >> + struct spinand_device *spinand = mtd_to_spinand(mtd); >> + struct nand_device *nand = mtd_to_nanddev(mtd); >> + struct device *dev = &spinand->spimem->spi->dev; >> + int ret; >> + >> + ret = spinand_reset_op(spinand); >> + if (ret) >> + return; >> + >> + ret = spinand_init_quad_enable(spinand); >> + if (ret) >> + return; >> + >> + ret = spinand_upd_cfg(spinand, CFG_OTP_ENABLE, 0); >> + if (ret) >> + return; >> + >> + ret = spinand_manufacturer_init(spinand); >> + if (ret) >> + return; >> + >> + ret = spinand_block_unlock(spinand); >> + if (ret) >> + return; >> + >> + spinand_ecc_enable(spinand, false); >> +} >> + >> static int spinand_init(struct spinand_device *spinand) >> { >> struct device *dev = &spinand->spimem->spi->dev; >> @@ -1137,15 +1186,9 @@ static int spinand_init(struct spinand_device *spinand) >> } >> >> /* After power up, all blocks are locked, so unlock them here. */ >> - for (i = 0; i < nand->memorg.ntargets; i++) { >> - ret = spinand_select_target(spinand, i); >> - if (ret) >> - goto err_manuf_cleanup; >> - >> - ret = spinand_lock_block(spinand, BL_ALL_UNLOCKED); >> - if (ret) >> - goto err_manuf_cleanup; >> - } >> + ret = spinand_block_unlock(spinand); >> + if ret) > > I doubt this as even be build-tested :) I just noticed that the MTD_SPI_NAND kernel flag was disable :-( that's explain why i didn't see this compilation issue .... sorry Thanks > >> + goto err_manuf_cleanup; >> >> ret = nanddev_init(nand, &spinand_ops, THIS_MODULE); >> if (ret) >> @@ -1167,6 +1210,7 @@ static int spinand_init(struct spinand_device *spinand) >> mtd->_block_isreserved = spinand_mtd_block_isreserved; >> mtd->_erase = spinand_mtd_erase; >> mtd->_max_bad_blocks = nanddev_mtd_max_bad_blocks; >> + mtd->_resume = spinand_mtd_resume; >> >> if (nand->ecc.engine) { >> ret = mtd_ooblayout_count_freebytes(mtd); > > Thanks, > Miquèl >
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c index 17f63f95f4a2..f77aeff11f43 100644 --- a/drivers/mtd/nand/spi/core.c +++ b/drivers/mtd/nand/spi/core.c @@ -1074,6 +1074,55 @@ static int spinand_detect(struct spinand_device *spinand) return 0; } +static int spinand_block_unlock(struct spinand_device *spinand) +{ + struct device *dev = &spinand->spimem->spi->dev; + struct nand_device *nand = spinand_to_nand(spinand); + int ret = 0, i; + + for (i = 0; i < nand->memorg.ntargets; i++) { + ret = spinand_select_target(spinand, i); + if (ret) + return ret; + + ret = spinand_lock_block(spinand, BL_ALL_UNLOCKED); + if (ret) + return ret; + } + + return ret; +} + +static void spinand_mtd_resume(struct mtd_info *mtd) +{ + struct spinand_device *spinand = mtd_to_spinand(mtd); + struct nand_device *nand = mtd_to_nanddev(mtd); + struct device *dev = &spinand->spimem->spi->dev; + int ret; + + ret = spinand_reset_op(spinand); + if (ret) + return; + + ret = spinand_init_quad_enable(spinand); + if (ret) + return; + + ret = spinand_upd_cfg(spinand, CFG_OTP_ENABLE, 0); + if (ret) + return; + + ret = spinand_manufacturer_init(spinand); + if (ret) + return; + + ret = spinand_block_unlock(spinand); + if (ret) + return; + + spinand_ecc_enable(spinand, false); +} + static int spinand_init(struct spinand_device *spinand) { struct device *dev = &spinand->spimem->spi->dev; @@ -1137,15 +1186,9 @@ static int spinand_init(struct spinand_device *spinand) } /* After power up, all blocks are locked, so unlock them here. */ - for (i = 0; i < nand->memorg.ntargets; i++) { - ret = spinand_select_target(spinand, i); - if (ret) - goto err_manuf_cleanup; - - ret = spinand_lock_block(spinand, BL_ALL_UNLOCKED); - if (ret) - goto err_manuf_cleanup; - } + ret = spinand_block_unlock(spinand); + if ret) + goto err_manuf_cleanup; ret = nanddev_init(nand, &spinand_ops, THIS_MODULE); if (ret) @@ -1167,6 +1210,7 @@ static int spinand_init(struct spinand_device *spinand) mtd->_block_isreserved = spinand_mtd_block_isreserved; mtd->_erase = spinand_mtd_erase; mtd->_max_bad_blocks = nanddev_mtd_max_bad_blocks; + mtd->_resume = spinand_mtd_resume; if (nand->ecc.engine) { ret = mtd_ooblayout_count_freebytes(mtd);