| Message ID | 20200828164750.10377-9-krzk@kernel.org |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | arm64: dts: imx8: Align pins and regulators with dtschema | expand |
On Fri, 2020-08-28 at 18:47 +0200, Krzysztof Kozlowski wrote: > The ROHM BD71847 PMIC has a 32.768 kHz clock. Adding necessary > parent > allows to probe the bd718x7 clock driver fixing boot errors: > > bd718xx-clk bd71847-clk.1.auto: No parent clk found > bd718xx-clk: probe of bd71847-clk.1.auto failed with error -22 > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> FWIW: Acked-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> > --- > arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts > b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts > index 3cb8b6bcb657..0115f07bbc9d 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts > +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts > @@ -149,6 +149,10 @@ > interrupts = <3 GPIO_ACTIVE_LOW>; > rohm,reset-snvs-powered; > > + #clock-cells = <0>; > + clocks = <&osc_32k 0>; > + clock-output-names = "clk-32k-out"; > + > regulators { > buck1_reg: BUCK1 { > regulator-name = "buck1";
On Fri, Aug 28, 2020 at 06:47:39PM +0200, Krzysztof Kozlowski wrote: > The ROHM BD71847 PMIC has a 32.768 kHz clock. Adding necessary parent > allows to probe the bd718x7 clock driver fixing boot errors: > > bd718xx-clk bd71847-clk.1.auto: No parent clk found > bd718xx-clk: probe of bd71847-clk.1.auto failed with error -22 > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Applied, thanks.
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts index 3cb8b6bcb657..0115f07bbc9d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts @@ -149,6 +149,10 @@ interrupts = <3 GPIO_ACTIVE_LOW>; rohm,reset-snvs-powered; + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; + regulators { buck1_reg: BUCK1 { regulator-name = "buck1";
The ROHM BD71847 PMIC has a 32.768 kHz clock. Adding necessary parent allows to probe the bd718x7 clock driver fixing boot errors: bd718xx-clk bd71847-clk.1.auto: No parent clk found bd718xx-clk: probe of bd71847-clk.1.auto failed with error -22 Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 4 ++++ 1 file changed, 4 insertions(+)