Message ID | 20190129105757.19138-1-colin.king@canonical.com |
---|---|
State | Accepted |
Delegated to: | Boris Brezillon |
Headers | show |
Series | [next] mtd: rawnand: meson: fix missing assignment of ret on a call to meson_chip_buffer_init | expand |
Hello Colin, On 2019/1/29 18:57, Colin King wrote: > From: Colin Ian King <colin.king@canonical.com> > > The call to meson_chip_buffer_init is not assigning ret, however, ret > is being checked for failure. Fix this by adding in the missing assignment. > ok. thanks for your time. > Fixes: 2d570b34b41a ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") > Signed-off-by: Colin Ian King <colin.king@canonical.com> > --- > drivers/mtd/nand/raw/meson_nand.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c > index e858d58d97b0..b9c543d1054c 100644 > --- a/drivers/mtd/nand/raw/meson_nand.c > +++ b/drivers/mtd/nand/raw/meson_nand.c > @@ -1206,7 +1206,7 @@ static int meson_nand_attach_chip(struct nand_chip *nand) > dev_err(nfc->dev, "16bits bus width not supported"); > return -EINVAL; > } > - meson_chip_buffer_init(nand); > + ret = meson_chip_buffer_init(nand); > if (ret) > return -ENOMEM; > >
Hi Colin, On 2019/1/29 18:57, Colin King wrote: > From: Colin Ian King <colin.king@canonical.com> > > The call to meson_chip_buffer_init is not assigning ret, however, ret > is being checked for failure. Fix this by adding in the missing assignment. > > Fixes: 2d570b34b41a ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") > Signed-off-by: Colin Ian King <colin.king@canonical.com> > --- > drivers/mtd/nand/raw/meson_nand.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c > index e858d58d97b0..b9c543d1054c 100644 > --- a/drivers/mtd/nand/raw/meson_nand.c > +++ b/drivers/mtd/nand/raw/meson_nand.c > @@ -1206,7 +1206,7 @@ static int meson_nand_attach_chip(struct nand_chip *nand) > dev_err(nfc->dev, "16bits bus width not supported"); > return -EINVAL; > } > - meson_chip_buffer_init(nand); > + ret = meson_chip_buffer_init(nand); Looks good to me: Acked-by: Liang Yang <liang.yang@amlogic.com> > if (ret) > return -ENOMEM; > >
Hi Liang, Colin, Liang Yang <liang.yang@amlogic.com> wrote on Wed, 30 Jan 2019 17:26:49 +0800: > Hi Colin, > > On 2019/1/29 18:57, Colin King wrote: > > From: Colin Ian King <colin.king@canonical.com> > > > > The call to meson_chip_buffer_init is not assigning ret, however, ret > > is being checked for failure. Fix this by adding in the missing assignment. > > > > Fixes: 2d570b34b41a ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") > > Signed-off-by: Colin Ian King <colin.king@canonical.com> > > --- > > drivers/mtd/nand/raw/meson_nand.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c > > index e858d58d97b0..b9c543d1054c 100644 > > --- a/drivers/mtd/nand/raw/meson_nand.c > > +++ b/drivers/mtd/nand/raw/meson_nand.c > > @@ -1206,7 +1206,7 @@ static int meson_nand_attach_chip(struct nand_chip *nand) > > dev_err(nfc->dev, "16bits bus width not supported"); > > return -EINVAL; > > } > > - meson_chip_buffer_init(nand); > > + ret = meson_chip_buffer_init(nand); > > Looks good to me: > > Acked-by: Liang Yang <liang.yang@amlogic.com> This is nand/next material, so if you don't mind I would like to squash the two fixes you sent into the original commit inserting the driver. Thanks, Miquèl
On 30/01/2019 09:32, Miquel Raynal wrote: > Hi Liang, Colin, > > Liang Yang <liang.yang@amlogic.com> wrote on Wed, 30 Jan 2019 17:26:49 > +0800: > >> Hi Colin, >> >> On 2019/1/29 18:57, Colin King wrote: >>> From: Colin Ian King <colin.king@canonical.com> >>> >>> The call to meson_chip_buffer_init is not assigning ret, however, ret >>> is being checked for failure. Fix this by adding in the missing assignment. >>> >>> Fixes: 2d570b34b41a ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") >>> Signed-off-by: Colin Ian King <colin.king@canonical.com> >>> --- >>> drivers/mtd/nand/raw/meson_nand.c | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c >>> index e858d58d97b0..b9c543d1054c 100644 >>> --- a/drivers/mtd/nand/raw/meson_nand.c >>> +++ b/drivers/mtd/nand/raw/meson_nand.c >>> @@ -1206,7 +1206,7 @@ static int meson_nand_attach_chip(struct nand_chip *nand) >>> dev_err(nfc->dev, "16bits bus width not supported"); >>> return -EINVAL; >>> } >>> - meson_chip_buffer_init(nand); >>> + ret = meson_chip_buffer_init(nand); >> >> Looks good to me: >> >> Acked-by: Liang Yang <liang.yang@amlogic.com> > > This is nand/next material, so if you don't mind I would like to squash > the two fixes you sent into the original commit inserting the driver. Sure, ok with me, squashing them makes sense. Colin > > > Thanks, > Miquèl >
Hi Miquel, Colin, On 2019/1/30 17:34, Colin Ian King wrote: > On 30/01/2019 09:32, Miquel Raynal wrote: >> Hi Liang, Colin, >> >> Liang Yang <liang.yang@amlogic.com> wrote on Wed, 30 Jan 2019 17:26:49 >> +0800: >> >>> Hi Colin, >>> >>> On 2019/1/29 18:57, Colin King wrote: >>>> From: Colin Ian King <colin.king@canonical.com> >>>> >>>> The call to meson_chip_buffer_init is not assigning ret, however, ret >>>> is being checked for failure. Fix this by adding in the missing assignment. >>>> >>>> Fixes: 2d570b34b41a ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") >>>> Signed-off-by: Colin Ian King <colin.king@canonical.com> >>>> --- >>>> drivers/mtd/nand/raw/meson_nand.c | 2 +- >>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>> >>>> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c >>>> index e858d58d97b0..b9c543d1054c 100644 >>>> --- a/drivers/mtd/nand/raw/meson_nand.c >>>> +++ b/drivers/mtd/nand/raw/meson_nand.c >>>> @@ -1206,7 +1206,7 @@ static int meson_nand_attach_chip(struct nand_chip *nand) >>>> dev_err(nfc->dev, "16bits bus width not supported"); >>>> return -EINVAL; >>>> } >>>> - meson_chip_buffer_init(nand); >>>> + ret = meson_chip_buffer_init(nand); >>> >>> Looks good to me: >>> >>> Acked-by: Liang Yang <liang.yang@amlogic.com> >> >> This is nand/next material, so if you don't mind I would like to squash >> the two fixes you sent into the original commit inserting the driver. > > Sure, ok with me, squashing them makes sense. > > Colin ok. >> >> >> Thanks, >> Miquèl >> > > . >
Hi Colin, Colin King <colin.king@canonical.com> wrote on Tue, 29 Jan 2019 10:57:57 +0000: > From: Colin Ian King <colin.king@canonical.com> > > The call to meson_chip_buffer_init is not assigning ret, however, ret > is being checked for failure. Fix this by adding in the missing assignment. > > Fixes: 2d570b34b41a ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") > Signed-off-by: Colin Ian King <colin.king@canonical.com> > --- > drivers/mtd/nand/raw/meson_nand.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > Merged in nand/next with the original commit. Thanks, Miquèl
diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c index e858d58d97b0..b9c543d1054c 100644 --- a/drivers/mtd/nand/raw/meson_nand.c +++ b/drivers/mtd/nand/raw/meson_nand.c @@ -1206,7 +1206,7 @@ static int meson_nand_attach_chip(struct nand_chip *nand) dev_err(nfc->dev, "16bits bus width not supported"); return -EINVAL; } - meson_chip_buffer_init(nand); + ret = meson_chip_buffer_init(nand); if (ret) return -ENOMEM;