@@ -157,6 +157,9 @@ bool spi_mem_default_supports_op(struct spi_mem *mem,
if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr)
return false;
+ if (op->cmd.nbytes != 1)
+ return false;
+
return true;
}
EXPORT_SYMBOL_GPL(spi_mem_default_supports_op);
@@ -171,7 +174,7 @@ static bool spi_mem_buswidth_is_valid(u8 buswidth)
static int spi_mem_check_op(const struct spi_mem_op *op)
{
- if (!op->cmd.buswidth)
+ if (!op->cmd.buswidth || !op->cmd.nbytes)
return -EINVAL;
if ((op->addr.nbytes && !op->addr.buswidth) ||
@@ -307,8 +310,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
return ret;
}
- tmpbufsize = sizeof(op->cmd.opcode) + op->addr.nbytes +
- op->dummy.nbytes;
+ tmpbufsize = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes;
/*
* Allocate a buffer to transmit the CMD, ADDR cycles with kmalloc() so
@@ -323,7 +325,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
tmpbuf[0] = op->cmd.opcode;
xfers[xferpos].tx_buf = tmpbuf;
- xfers[xferpos].len = sizeof(op->cmd.opcode);
+ xfers[xferpos].len = op->cmd.nbytes;
xfers[xferpos].tx_nbits = op->cmd.buswidth;
spi_message_add_tail(&xfers[xferpos], &msg);
xferpos++;
@@ -425,8 +427,7 @@ int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
return ctlr->mem_ops->adjust_op_size(mem, op);
if (!ctlr->mem_ops || !ctlr->mem_ops->exec_op) {
- len = sizeof(op->cmd.opcode) + op->addr.nbytes +
- op->dummy.nbytes;
+ len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes;
if (len > spi_max_transfer_size(mem->spi))
return -EINVAL;
@@ -195,7 +195,7 @@ static int mtk_nor_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
}
}
- len = MTK_NOR_PRG_MAX_SIZE - sizeof(op->cmd.opcode) - op->addr.nbytes -
+ len = MTK_NOR_PRG_MAX_SIZE - op->cmd.nbytes - op->addr.nbytes -
op->dummy.nbytes;
if (op->data.nbytes > len)
op->data.nbytes = len;
@@ -219,7 +219,7 @@ static bool mtk_nor_supports_op(struct spi_mem *mem,
(op->dummy.buswidth == 0) &&
(op->data.buswidth == 1);
}
- len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes;
+ len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes;
if ((len > MTK_NOR_PRG_MAX_SIZE) ||
((op->data.nbytes) && (len == MTK_NOR_PRG_MAX_SIZE)))
return false;
@@ -527,20 +527,21 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
struct zynq_qspi *xqspi = spi_controller_get_devdata(mem->spi->master);
int err = 0, i;
u8 *tmpbuf;
+ u8 opcode = op->cmd.opcode;
dev_dbg(xqspi->dev, "cmd:%#x mode:%d.%d.%d.%d\n",
- op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
+ opcode, op->cmd.buswidth, op->addr.buswidth,
op->dummy.buswidth, op->data.buswidth);
zynq_qspi_chipselect(mem->spi, true);
zynq_qspi_config_op(xqspi, mem->spi);
- if (op->cmd.opcode) {
+ if (op->cmd.nbytes) {
reinit_completion(&xqspi->data_completion);
- xqspi->txbuf = (u8 *)&op->cmd.opcode;
+ xqspi->txbuf = &opcode;
xqspi->rxbuf = NULL;
- xqspi->tx_bytes = sizeof(op->cmd.opcode);
- xqspi->rx_bytes = sizeof(op->cmd.opcode);
+ xqspi->tx_bytes = op->cmd.nbytes;
+ xqspi->rx_bytes = op->cmd.nbytes;
zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
ZYNQ_QSPI_IXR_RXTX_MASK);
@@ -17,6 +17,7 @@
{ \
.buswidth = __buswidth, \
.opcode = __opcode, \
+ .nbytes = 1, \
}
#define SPI_MEM_OP_ADDR(__nbytes, __val, __buswidth) \
@@ -69,6 +70,8 @@ enum spi_mem_data_dir {
/**
* struct spi_mem_op - describes a SPI memory operation
+ * @cmd.nbytes: number of opcode bytes (only 1 or 2 are valid). The opcode is
+ * sent MSB-first.
* @cmd.buswidth: number of IO lines used to transmit the command
* @cmd.opcode: operation opcode
* @cmd.dtr: whether the command opcode should be sent in DTR mode or not
@@ -94,9 +97,10 @@ enum spi_mem_data_dir {
*/
struct spi_mem_op {
struct {
+ u8 nbytes;
u8 buswidth;
u8 dtr : 1;
- u8 opcode;
+ u16 opcode;
} cmd;
struct {