@@ -347,6 +347,84 @@ int spi_nor_write_disable(struct spi_nor *nor)
}
/**
+ * spi_nor_read_cr2() - Read the Configuration Register 2.
+ * @nor: pointer to 'struct spi_nor'.
+ * @addr: offset address to read.
+ * @cr2: pointer to a DMA-able buffer where the value of the
+ * Configuration Register 2 will be written.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_read_cr2(struct spi_nor *nor, u32 addr, u8 *cr2)
+{
+ int ret;
+ u8 cmd = nor->params->rd_reg_cmd;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(cmd, 1),
+ SPI_MEM_OP_ADDR(4, addr, 1),
+ SPI_MEM_OP_DUMMY(4, 1),
+ SPI_MEM_OP_DATA_IN(1, cr2, 1));
+
+ spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ if (spi_nor_protocol_is_dtr(nor->reg_proto))
+ ret = -ENOTSUPP;
+ else
+ ret = nor->controller_ops->read_reg(nor, cmd, cr2, 1);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d reading CR2\n", ret);
+
+ return ret;
+}
+
+/**
+ * spi_nor_write_cr2() - Write the Configuration Register 2.
+ * @nor: pointer to 'struct spi_nor'.
+ * @addr: offset address to write.
+ * @cr2: pointer to a DMA-able buffer where the value of the
+ * Configuratin Register 2 will be read.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_write_cr2(struct spi_nor *nor, u32 addr, u8 *cr2)
+{
+ int ret;
+ u8 cmd = nor->params->wr_reg_cmd;
+
+ ret = spi_nor_write_enable(nor);
+ if (ret)
+ return ret;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(cmd, 1),
+ SPI_MEM_OP_ADDR(4, addr, 1),
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_DATA_OUT(1, cr2, 1));
+
+ spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ if (spi_nor_protocol_is_dtr(nor->reg_proto))
+ ret = -ENOTSUPP;
+ else
+ ret = nor->controller_ops->write_reg(nor, cmd, cr2, 1);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d write CFG Reg 2\n", ret);
+
+ return ret;
+}
+
+/**
* spi_nor_read_sr() - Read the Status Register.
* @nor: pointer to 'struct spi_nor'.
* @sr: pointer to a DMA-able buffer where the value of the
@@ -438,6 +438,8 @@ void spi_nor_spimem_setup_op(const struct spi_nor *nor,
const enum spi_nor_protocol proto);
int spi_nor_write_enable(struct spi_nor *nor);
int spi_nor_write_disable(struct spi_nor *nor);
+int spi_nor_read_cr2(struct spi_nor *nor, u32 addr, u8 *cr2);
+int spi_nor_write_cr2(struct spi_nor *nor, u32 addr, u8 *cr2);
int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable);
int spi_nor_write_ear(struct spi_nor *nor, u8 ear);
int spi_nor_wait_till_ready(struct spi_nor *nor);
Configuration register 2 is to set the device operation condition like STR or DTR mode at address offset 0 and DQS mode at address offset 0x200. Each device has various address offset for it's specific operatoin setting. Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> --- drivers/mtd/spi-nor/core.c | 78 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/mtd/spi-nor/core.h | 2 ++ 2 files changed, 80 insertions(+)