@@ -320,6 +320,7 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va
break;
case NAND_CMD_READID:
flcmncr_val &= ~SNAND_E;
+ flcmdcr_val |= CDSRC_E;
addr_len_bytes = ADRCNT_1;
break;
case NAND_CMD_STATUS:
@@ -559,12 +560,18 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command,
case NAND_CMD_READID:
set_cmd_regs(mtd, command, command);
- set_addr(mtd, 0, 0);
- flctl->read_bytes = 4;
+ /* READID is always performed using an 8-bit bus */
+ if (flctl->chip.options & NAND_BUSWIDTH_16)
+ column <<= 1;
+ set_addr(mtd, column, 0);
+
+ flctl->read_bytes = 8;
writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
+ empty_fifo(flctl);
start_translation(flctl);
- read_datareg(flctl, 0); /* read and end */
+ read_fiforeg(flctl, flctl->read_bytes, 0);
+ wait_completion(flctl);
break;
case NAND_CMD_ERASE1:
The nand base code wants to read out 8 bytes in the READID command. Reflect this in the driver code. Signed-off-by: Bastian Hecht <hechtb@gmail.com> --- drivers/mtd/nand/sh_flctl.c | 13 ++++++++++--- 1 files changed, 10 insertions(+), 3 deletions(-)