@@ -250,7 +250,6 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
pdev->conf.Attributes = CONF_ENABLE_IRQ;
- pdev->conf.IntType = INT_MEMORY_AND_IO;
/* See if we have a manufacturer identifier. Use it to set is_kme for
vendor quirks */
@@ -866,7 +866,6 @@ static int bluecard_probe(struct pcmcia_device *link)
link->priv = info;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
return bluecard_config(link);
}
@@ -661,7 +661,6 @@ static int bt3c_probe(struct pcmcia_device *link)
link->resource[0]->end = 8;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
return bt3c_config(link);
}
@@ -590,7 +590,6 @@ static int btuart_probe(struct pcmcia_device *link)
link->resource[0]->end = 8;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
return btuart_config(link);
}
@@ -576,7 +576,6 @@ static int dtl1_probe(struct pcmcia_device *link)
link->resource[0]->end = 8;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
return dtl1_config(link);
}
@@ -1767,8 +1767,6 @@ static int cm4000_config(struct pcmcia_device * link, int devno)
if (pcmcia_loop_config(link, cm4000_config_check, NULL))
goto cs_release;
- link->conf.IntType = 00000002;
-
if (pcmcia_request_configuration(link, &link->conf))
goto cs_release;
@@ -1829,7 +1827,6 @@ static int cm4000_probe(struct pcmcia_device *link)
dev->p_dev = link;
link->priv = dev;
- link->conf.IntType = INT_MEMORY_AND_IO;
dev_table[i] = link;
init_waitqueue_head(&dev->devq);
@@ -547,8 +547,6 @@ static int reader_config(struct pcmcia_device *link, int devno)
if (pcmcia_loop_config(link, cm4040_config_check, NULL))
goto cs_release;
- link->conf.IntType = 00000002;
-
fail_rc = pcmcia_request_configuration(link, &link->conf);
if (fail_rc != 0) {
dev_printk(KERN_INFO, &link->dev,
@@ -599,7 +597,6 @@ static int reader_probe(struct pcmcia_device *link)
link->priv = dev;
dev->p_dev = link;
- link->conf.IntType = INT_MEMORY_AND_IO;
dev_table[i] = link;
init_waitqueue_head(&dev->devq);
@@ -173,7 +173,6 @@ static int config_ipwireless(struct ipw_dev *ipw)
return ret;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
INIT_WORK(&ipw->work_reboot, signalled_reboot_work);
@@ -551,7 +551,6 @@ static int mgslpc_probe(struct pcmcia_device *link)
/* Initialize the struct pcmcia_device structure */
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
ret = mgslpc_config(link);
if (ret)
@@ -595,7 +594,6 @@ static int mgslpc_config(struct pcmcia_device *link)
goto failed;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 8;
link->conf.Present = PRESENT_OPTION;
@@ -100,7 +100,6 @@ static int ide_probe(struct pcmcia_device *link)
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
return ide_config(link);
} /* ide_attach */
@@ -80,7 +80,6 @@ static int avmcs_probe(struct pcmcia_device *p_dev)
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
p_dev->conf.ConfigIndex = 1;
p_dev->conf.Present = PRESENT_OPTION;
@@ -85,7 +85,6 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev)
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
p_dev->conf.ConfigIndex = 1;
p_dev->conf.Present = PRESENT_OPTION;
@@ -130,7 +130,6 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link)
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
return elsa_cs_config(link);
} /* elsa_cs_attach */
@@ -133,7 +133,6 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link)
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
return sedlbauer_config(link);
} /* sedlbauer_attach */
@@ -110,7 +110,6 @@ static int __devinit teles_probe(struct pcmcia_device *link)
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
return teles_cs_config(link);
} /* teles_attach */
@@ -575,7 +575,6 @@ static int pcmciamtd_config(struct pcmcia_device *link)
link->vpp = 0;
}
- link->conf.IntType = INT_MEMORY;
link->conf.ConfigIndex = 0;
DEBUG(2, "Setting Configuration");
ret = pcmcia_request_configuration(link, &link->conf);
@@ -720,7 +719,6 @@ static int pcmciamtd_probe(struct pcmcia_device *link)
link->priv = dev;
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY;
return pcmciamtd_config(link);
}
@@ -281,7 +281,6 @@ static int tc574_probe(struct pcmcia_device *link)
link->resource[0]->end = 32;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
dev->netdev_ops = &el3_netdev_ops;
@@ -217,7 +217,6 @@ static int tc589_probe(struct pcmcia_device *link)
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
dev->netdev_ops = &el3_netdev_ops;
@@ -167,7 +167,6 @@ static int axnet_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = dev;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
dev->netdev_ops = &axnet_netdev_ops;
@@ -161,7 +161,6 @@ static int com20020_probe(struct pcmcia_device *p_dev)
p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
p_dev->resource[0]->end = 16;
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
info->dev = dev;
p_dev->priv = info;
@@ -253,7 +253,6 @@ static int fmvj18x_probe(struct pcmcia_device *link)
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
dev->netdev_ops = &fjn_netdev_ops;
dev->watchdog_timeo = TX_TIMEOUT;
@@ -153,7 +153,6 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link)
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
link->resource[0]->end = 4;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
info->dev = dev;
@@ -461,7 +461,6 @@ static int nmclan_probe(struct pcmcia_device *link)
link->resource[0]->end = 32;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
@@ -261,7 +261,6 @@ static int pcnet_probe(struct pcmcia_device *link)
link->priv = dev;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
dev->netdev_ops = &pcnet_netdev_ops;
@@ -327,7 +327,6 @@ static int smc91c92_probe(struct pcmcia_device *link)
link->resource[0]->end = 16;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
/* The SMC91c92-specific entries in the device structure. */
dev->netdev_ops = &smc_netdev_ops;
@@ -530,7 +530,6 @@ xirc2ps_probe(struct pcmcia_device *link)
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
/* Fill in card specific entries */
@@ -104,7 +104,6 @@ static int airo_probe(struct pcmcia_device *p_dev)
device, and can be hard-wired here.
*/
p_dev->conf.Attributes = 0;
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
@@ -114,7 +114,6 @@ static int atmel_probe(struct pcmcia_device *p_dev)
device, and can be hard-wired here.
*/
p_dev->conf.Attributes = 0;
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
@@ -73,7 +73,6 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
err = -ENODEV;
dev->conf.Attributes = CONF_ENABLE_IRQ;
- dev->conf.IntType = INT_MEMORY_AND_IO;
dev->resource[2]->flags |= WIN_ENABLE | WIN_DATA_WIDTH_16 |
WIN_USE_WAIT;
@@ -437,7 +437,6 @@ static int hostap_cs_probe(struct pcmcia_device *p_dev)
int ret;
PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info);
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
ret = prism2_config(p_dev);
if (ret) {
@@ -836,7 +836,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
p_dev->priv = card;
p_dev->conf.Attributes = 0;
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) {
lbs_pr_err("error in pcmcia_loop_config\n");
@@ -123,7 +123,6 @@ orinoco_cs_probe(struct pcmcia_device *link)
* number, sizes, and attributes of IO windows) are fixed by
* the nature of the device, and can be hard-wired here. */
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
return orinoco_cs_config(link);
} /* orinoco_cs_attach */
@@ -185,7 +185,6 @@ spectrum_cs_probe(struct pcmcia_device *link)
* number, sizes, and attributes of IO windows) are fixed by
* the nature of the device, and can be hard-wired here. */
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
return spectrum_cs_config(link);
} /* spectrum_cs_attach */
@@ -319,7 +319,6 @@ static int ray_probe(struct pcmcia_device *p_dev)
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
p_dev->conf.ConfigIndex = 1;
p_dev->priv = dev;
@@ -1889,7 +1889,6 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
p_dev->conf.ConfigIndex = 1;
dev = alloc_etherdev(sizeof(struct wl3501_card));
@@ -104,7 +104,6 @@ static int parport_probe(struct pcmcia_device *link)
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
return parport_config(link);
} /* parport_attach */
@@ -34,7 +34,6 @@ typedef struct config_t {
struct kref ref;
unsigned int state;
unsigned int Attributes;
- unsigned int IntType;
unsigned int ConfigBase;
unsigned char Option;
unsigned int CardValues;
@@ -447,11 +447,6 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
if (!(s->state & SOCKET_PRESENT))
return -ENODEV;
- if (req->IntType & INT_CARDBUS) {
- dev_dbg(&p_dev->dev, "IntType may not be INT_CARDBUS\n");
- return -EINVAL;
- }
-
mutex_lock(&s->ops_mutex);
c = p_dev->function_config;
if (c->state & CONFIG_LOCKED) {
@@ -470,12 +465,9 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
}
/* Pick memory or I/O card, DMA mode, interrupt */
- c->IntType = req->IntType;
c->Attributes = req->Attributes;
- if (req->IntType & INT_MEMORY_AND_IO)
+ if (p_dev->_io)
s->socket.flags |= SS_IOCARD;
- if (req->IntType & INT_ZOOMED_VIDEO)
- s->socket.flags |= SS_ZVCARD | SS_IOCARD;
if (req->Attributes & CONF_ENABLE_DMA)
s->socket.flags |= SS_DMA_MODE;
if (req->Attributes & CONF_ENABLE_SPKR) {
@@ -103,7 +103,6 @@ static int aha152x_probe(struct pcmcia_device *link)
link->resource[0]->end = 0x20;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
return aha152x_config_cs(link);
@@ -86,7 +86,6 @@ static int fdomain_probe(struct pcmcia_device *link)
link->resource[0]->end = 0x10;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
return fdomain_config(link);
@@ -1563,7 +1563,6 @@ static int nsp_cs_probe(struct pcmcia_device *link)
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
ret = nsp_cs_config(link);
@@ -159,7 +159,6 @@ static int qlogic_probe(struct pcmcia_device *link)
link->resource[0]->end = 16;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
return qlogic_config(link);
@@ -862,7 +862,6 @@ SYM53C500_probe(struct pcmcia_device *link)
link->resource[0]->end = 16;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
return SYM53C500_config(link);
} /* SYM53C500_attach */
@@ -337,8 +337,6 @@ static int serial_probe(struct pcmcia_device *link)
if (do_sound)
link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.IntType = INT_MEMORY_AND_IO;
-
return serial_config(link);
}
@@ -694,7 +694,6 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link)
/* Initialize the pcmcia_device structure */
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
cur_dev = link;
@@ -170,7 +170,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link)
device, and can be hard-wired here.
*/
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
cur_dev = link;
@@ -499,7 +499,6 @@ static int dio700_cs_attach(struct pcmcia_device *link)
device, and can be hard-wired here.
*/
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
pcmcia_cur_dev = link;
@@ -251,7 +251,6 @@ static int dio24_cs_attach(struct pcmcia_device *link)
device, and can be hard-wired here.
*/
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
pcmcia_cur_dev = link;
@@ -227,7 +227,6 @@ static int labpc_cs_attach(struct pcmcia_device *link)
device, and can be hard-wired here.
*/
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
pcmcia_cur_dev = link;
@@ -266,7 +266,6 @@ static int cs_attach(struct pcmcia_device *link)
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
link->resource[0]->end = 16;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
cur_dev = link;
@@ -1039,7 +1039,6 @@ static int daqp_cs_attach(struct pcmcia_device *link)
device, and can be hard-wired here.
*/
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
daqp_cs_config(link);
@@ -148,7 +148,6 @@ static int wl_adapter_attach(struct pcmcia_device *link)
link->resource[0]->end = HCF_NUM_IO_PORTS;
link->resource[0]->flags= IO_DATA_PATH_WIDTH_16;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 5;
link->conf.Present = PRESENT_OPTION;
@@ -34,7 +34,6 @@ static int ixj_probe(struct pcmcia_device *p_dev)
/* Create new ixj device */
p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
p_dev->priv = kzalloc(sizeof(struct ixj_info_t), GFP_KERNEL);
if (!p_dev->priv) {
return -ENOMEM;
@@ -228,7 +228,6 @@ static int sl811_cs_probe(struct pcmcia_device *link)
link->priv = local;
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
return sl811_cs_config(link);
}
@@ -22,7 +22,6 @@
/* For RequestConfiguration */
typedef struct config_req_t {
u_int Attributes;
- u_int IntType;
u_int ConfigBase;
u_char ConfigIndex;
u_int Present;
@@ -36,12 +35,6 @@ typedef struct config_req_t {
#define CONF_ENABLE_ESR 0x10
#define CONF_VALID_CLIENT 0x100
-/* IntType field */
-#define INT_MEMORY 0x01
-#define INT_MEMORY_AND_IO 0x02
-#define INT_CARDBUS 0x04
-#define INT_ZOOMED_VIDEO 0x08
-
/* Configuration registers present */
#define PRESENT_OPTION 0x001
#define PRESENT_STATUS 0x002
@@ -143,7 +143,6 @@ static int snd_pdacf_probe(struct pcmcia_device *link)
link->resource[0]->end = 16;
link->conf.Attributes = CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
@@ -163,7 +163,6 @@ static int snd_vxpocket_new(struct snd_card *card, int ibl,
link->resource[0]->end = 16;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;