| Message ID | 1239883865-17915-1-git-send-email-sr@denx.de |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Apr 16, 2009 at 6:11 AM, Stefan Roese <sr@denx.de> wrote: > Signed-off-by: Stefan Roese <sr@denx.de> > CC: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> I'll pick this one up too. > --- > Changes in ver3: > - Removed reference to Intel P30 parts > - Added exact chip compatible property for best practice. > > Documentation/powerpc/dts-bindings/mtd-physmap.txt | 19 ++++++++++++++++++- > 1 files changed, 18 insertions(+), 1 deletions(-) > > diff --git a/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/Documentation/powerpc/dts-bindings/mtd-physmap.txt > index cd474f9..667c9bd 100644 > --- a/Documentation/powerpc/dts-bindings/mtd-physmap.txt > +++ b/Documentation/powerpc/dts-bindings/mtd-physmap.txt > @@ -5,7 +5,9 @@ file systems on embedded devices. > > - compatible : should contain the specific model of flash chip(s) > used, if known, followed by either "cfi-flash" or "jedec-flash" > - - reg : Address range of the flash chip > + - reg : Address range(s) of the flash chip(s) > + It's possible to (optionally) define multiple "reg" tuples so that > + non-identical NOR chips can be described in one flash node. > - bank-width : Width (in bytes) of the flash bank. Equal to the > device width times the number of interleaved chips. > - device-width : (optional) Width of a single flash chip. If > @@ -61,3 +63,18 @@ Example: > read-only; > }; > }; > + > +Here an example with multiple "reg" tuples: > + > + flash@f0000000,0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "intel,PC48F4400P0VB", "cfi-flash"; > + reg = <0 0x00000000 0x02000000 > + 0 0x02000000 0x02000000>; > + bank-width = <2>; > + partition@0 { > + label = "test-part1"; > + reg = <0 0x04000000>; > + }; > + }; > -- > 1.6.2.3 > >
diff --git a/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/Documentation/powerpc/dts-bindings/mtd-physmap.txt index cd474f9..667c9bd 100644 --- a/Documentation/powerpc/dts-bindings/mtd-physmap.txt +++ b/Documentation/powerpc/dts-bindings/mtd-physmap.txt @@ -5,7 +5,9 @@ file systems on embedded devices. - compatible : should contain the specific model of flash chip(s) used, if known, followed by either "cfi-flash" or "jedec-flash" - - reg : Address range of the flash chip + - reg : Address range(s) of the flash chip(s) + It's possible to (optionally) define multiple "reg" tuples so that + non-identical NOR chips can be described in one flash node. - bank-width : Width (in bytes) of the flash bank. Equal to the device width times the number of interleaved chips. - device-width : (optional) Width of a single flash chip. If @@ -61,3 +63,18 @@ Example: read-only; }; }; + +Here an example with multiple "reg" tuples: + + flash@f0000000,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "intel,PC48F4400P0VB", "cfi-flash"; + reg = <0 0x00000000 0x02000000 + 0 0x02000000 0x02000000>; + bank-width = <2>; + partition@0 { + label = "test-part1"; + reg = <0 0x04000000>; + }; + };
Signed-off-by: Stefan Roese <sr@denx.de> CC: Grant Likely <grant.likely@secretlab.ca> --- Changes in ver3: - Removed reference to Intel P30 parts - Added exact chip compatible property for best practice. Documentation/powerpc/dts-bindings/mtd-physmap.txt | 19 ++++++++++++++++++- 1 files changed, 18 insertions(+), 1 deletions(-)