@@ -21,6 +21,7 @@
#include <linux/mmc/host.h>
#include <linux/pm.h>
#include <linux/backlight.h>
+#include <linux/mtd/sharpsl.h>
#include <video/w100fb.h>
#include <asm/setup.h>
@@ -483,6 +484,55 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
.gpio_pullup = CORGI_GPIO_USB_PULLUP,
};
+static struct mtd_partition sharpsl_nand_partitions[] = {
+ {
+ .name = "System Area",
+ .offset = 0,
+ .size = 7 * 1024 * 1024,
+ },
+ {
+ .name = "Root Filesystem",
+ .offset = 7 * 1024 * 1024,
+ .size = 25 * 1024 * 1024,
+ },
+ {
+ .name = "Home Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr sharpsl_bbt = {
+ .options = 0,
+ .offs = 4,
+ .len = 2,
+ .pattern = scan_ff_pattern
+};
+
+static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
+ .badblock_pattern = &sharpsl_bbt,
+ .partitions = sharpsl_nand_partitions,
+ .nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions),
+};
+
+static struct resource sharpsl_nand_resources[] = {
+ {
+ .start = 0x0C000000,
+ .end = 0x0C000FFF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sharpsl_nand_device = {
+ .name = "sharpsl-nand",
+ .id = -1,
+ .resource = sharpsl_nand_resources,
+ .num_resources = ARRAY_SIZE(sharpsl_nand_resources),
+ .dev.platform_data = &sharpsl_nand_platform_data,
+};
+
static struct platform_device *devices[] __initdata = {
&corgiscoop_device,
@@ -492,6 +542,7 @@ static struct platform_device *devices[] __initdata = {
&corgibl_device,
&corgits_device,
&corgiled_device,
+ &sharpsl_nand_device,
};
static void corgi_poweroff(void)
@@ -537,6 +588,9 @@ static void __init corgi_init(void)
platform_scoop_config = &corgi_pcmcia_config;
+ if (machine_is_husky())
+ sharpsl_nand_partitions[1].size = 53 * 1024 * 1024;
+
platform_add_devices(devices, ARRAY_SIZE(devices));
}
@@ -20,6 +20,7 @@
#include <linux/fb.h>
#include <linux/pm.h>
#include <linux/delay.h>
+#include <linux/mtd/sharpsl.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -320,11 +321,61 @@ static struct pxafb_mach_info poodle_fb_info = {
.lccr3 = 0,
};
+static struct mtd_partition sharpsl_nand_partitions[] = {
+ {
+ .name = "System Area",
+ .offset = 0,
+ .size = 7 * 1024 * 1024,
+ },
+ {
+ .name = "Root Filesystem",
+ .offset = 7 * 1024 * 1024,
+ .size = 22 * 1024 * 1024,
+ },
+ {
+ .name = "Home Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr sharpsl_bbt = {
+ .options = 0,
+ .offs = 4,
+ .len = 2,
+ .pattern = scan_ff_pattern
+};
+
+static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
+ .badblock_pattern = &sharpsl_bbt,
+ .partitions = sharpsl_nand_partitions,
+ .nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions),
+};
+
+static struct resource sharpsl_nand_resources[] = {
+ {
+ .start = 0x0C000000,
+ .end = 0x0C000FFF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sharpsl_nand_device = {
+ .name = "sharpsl-nand",
+ .id = -1,
+ .resource = sharpsl_nand_resources,
+ .num_resources = ARRAY_SIZE(sharpsl_nand_resources),
+ .dev.platform_data = &sharpsl_nand_platform_data,
+};
+
static struct platform_device *devices[] __initdata = {
&poodle_locomo_device,
&poodle_scoop_device,
&poodle_ssp_device,
&poodle_ts_device,
+ &sharpsl_nand_device,
};
static void poodle_poweroff(void)
@@ -22,6 +22,7 @@
#include <linux/mmc/host.h>
#include <linux/pm.h>
#include <linux/backlight.h>
+#include <linux/mtd/sharpsl.h>
#include <asm/setup.h>
#include <asm/memory.h>
@@ -522,6 +523,54 @@ static struct pxafb_mach_info spitz_pxafb_info = {
.pxafb_lcd_power = spitz_lcd_power,
};
+static struct mtd_partition sharpsl_nand_partitions[] = {
+ {
+ .name = "System Area",
+ .offset = 0,
+ .size = 7 * 1024 * 1024,
+ },
+ {
+ .name = "Root Filesystem",
+ .offset = 7 * 1024 * 1024,
+ },
+ {
+ .name = "Home Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr sharpsl_bbt = {
+ .options = 0,
+ .offs = 4,
+ .len = 2,
+ .pattern = scan_ff_pattern
+};
+
+static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
+ .badblock_pattern = &sharpsl_bbt,
+ .partitions = sharpsl_nand_partitions,
+ .nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions),
+};
+
+static struct resource sharpsl_nand_resources[] = {
+ {
+ .start = 0x0C000000,
+ .end = 0x0C000FFF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sharpsl_nand_device = {
+ .name = "sharpsl-nand",
+ .id = -1,
+ .resource = sharpsl_nand_resources,
+ .num_resources = ARRAY_SIZE(sharpsl_nand_resources),
+ .dev.platform_data = &sharpsl_nand_platform_data,
+};
+
static struct platform_device *devices[] __initdata = {
&spitzscoop_device,
@@ -552,6 +601,14 @@ static void __init common_init(void)
pm_power_off = spitz_poweroff;
arm_pm_restart = spitz_restart;
+ if (machine_is_spitz()) {
+ sharpsl_nand_partitions[1].size = 5 * 1024 * 1024;
+ } else if (machine_is_akita()) {
+ sharpsl_nand_partitions[1].size = 58 * 1024 * 1024;
+ } else if (machine_is_borzoi()) {
+ sharpsl_nand_partitions[1].size = 32 * 1024 * 1024;
+ }
+
PMCR = 0x00;
/* setup sleep mode values */
@@ -642,10 +699,29 @@ static void akita_bl_set_intensity(int intensity)
akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
}
+static struct nand_bbt_descr sharpsl_akita_bbt = {
+ .options = 0,
+ .offs = 4,
+ .len = 1,
+ .pattern = scan_ff_pattern
+};
+
+static struct nand_ecclayout akita_oobinfo = {
+ .eccbytes = 24,
+ .eccpos = {
+ 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
+ 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
+ 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
+ .oobfree = {{0x08, 0x09}}
+};
+
static void __init akita_init(void)
{
spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode;
+ sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
+ sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
+
/* We just pretend the second element of the array doesn't exist */
spitz_pcmcia_config.num_devs = 1;
platform_scoop_config = &spitz_pcmcia_config;
@@ -247,93 +247,8 @@ static struct platform_driver sharpsl_nand_driver = {
.remove = __devexit_p(sharpsl_nand_remove),
};
-/*
- * Define partitions for flash device
- */
-static struct mtd_partition sharpsl_nand_partitions[] = {
- {
- .name = "System Area",
- .offset = 0,
- .size = 7 * 1024 * 1024,
- },
- {
- .name = "Root Filesystem",
- .offset = 7 * 1024 * 1024,
- .size = 30 * 1024 * 1024,
- },
- {
- .name = "Home Filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr sharpsl_bbt = {
- .options = 0,
- .offs = 4,
- .len = 2,
- .pattern = scan_ff_pattern
-};
-
-static struct nand_bbt_descr sharpsl_akita_bbt = {
- .options = 0,
- .offs = 4,
- .len = 1,
- .pattern = scan_ff_pattern
-};
-
-static struct nand_ecclayout akita_oobinfo = {
- .eccbytes = 24,
- .eccpos = {
- 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
- 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
- 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
- .oobfree = {{0x08, 0x09}}
-};
-
-static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
- .badblock_pattern = &sharpsl_bbt,
- .partitions = sharpsl_nand_partitions,
- .nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions),
-};
-
-static struct resource sharpsl_nand_resources[] = {
- {
- .start = 0x0C000000,
- .end = 0x0C000FFF,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device sharpsl_nand_device = {
- .name = "sharpsl-nand",
- .id = -1,
- .resource = sharpsl_nand_resources,
- .num_resources = ARRAY_SIZE(sharpsl_nand_resources),
- .dev.platform_data = &sharpsl_nand_platform_data,
-};
-
static int __init sharpsl_nand_init(void)
{
- if (machine_is_poodle()) {
- sharpsl_nand_partitions[1].size = 22 * 1024 * 1024;
- } else if (machine_is_corgi() || machine_is_shepherd()) {
- sharpsl_nand_partitions[1].size = 25 * 1024 * 1024;
- } else if (machine_is_husky()) {
- sharpsl_nand_partitions[1].size = 53 * 1024 * 1024;
- } else if (machine_is_spitz()) {
- sharpsl_nand_partitions[1].size = 5 * 1024 * 1024;
- } else if (machine_is_akita()) {
- sharpsl_nand_partitions[1].size = 58 * 1024 * 1024;
- sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
- sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
- } else if (machine_is_borzoi()) {
- sharpsl_nand_partitions[1].size = 32 * 1024 * 1024;
- }
-
- platform_device_register(&sharpsl_nand_device);
return platform_driver_register(&sharpsl_nand_driver);
}
module_init(sharpsl_nand_init);
@@ -341,10 +256,10 @@ module_init(sharpsl_nand_init);
static void __exit sharpsl_nand_exit(void)
{
platform_driver_unregister(&sharpsl_nand_driver);
- platform_device_unregister(&sharpsl_nand_device);
}
module_exit(sharpsl_nand_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
MODULE_DESCRIPTION("Device specific logic for NAND flash on Sharp SL-C7xx Series");
+
Finally move registration of sharpsl-nand device to board-specific code. sharpsl nand driver is now clean and simple. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> --- arch/arm/mach-pxa/corgi.c | 54 +++++++++++++++++++++++++++ arch/arm/mach-pxa/poodle.c | 51 ++++++++++++++++++++++++++ arch/arm/mach-pxa/spitz.c | 76 ++++++++++++++++++++++++++++++++++++++ drivers/mtd/nand/sharpsl.c | 87 +------------------------------------------- 4 files changed, 182 insertions(+), 86 deletions(-)