diff mbox

[v2,1/2] ARM: cache-l2x0: remove __init annotation from initialization functions

Message ID CAGsJ_4yzbN4xZOvkL+RgPCiuF_sy=KZSV+0Di7Qu7e6q_RGqFg@mail.gmail.com
State New
Headers show

Commit Message

Barry Song Sept. 19, 2011, 3:36 a.m. UTC 
2011/9/17 Russell King - ARM Linux <linux@arm.linux.org.uk>:
> On Sat, Sep 17, 2011 at 10:41:58PM +0800, Barry Song wrote:
>> for aux ctrl, it is really simple. but how about the following:
>>
>>  393 static void __init pl310_of_setup(const struct device_node *np,
>>  394                                   __u32 *aux_val, __u32 *aux_mask)
>>  395 {
>>  396         u32 data[3] = { 0, 0, 0 };
>>  397         u32 tag[3] = { 0, 0, 0 };
>>  398         u32 filter[2] = { 0, 0 };
>>  399
>>  400         of_property_read_u32_array(np, "arm,tag-latency", tag,
>> ARRAY_SIZE(tag));
>>  401         if (tag[0] && tag[1] && tag[2])
>>  402                 writel_relaxed(
>>  403                         ((tag[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
>>  404                         ((tag[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
>>  405                         ((tag[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
>>  406                         l2x0_base + L2X0_TAG_LATENCY_CTRL);
>>  407
>>  408         of_property_read_u32_array(np, "arm,data-latency",
>>  409                                    data, ARRAY_SIZE(data));
>>  410         if (data[0] && data[1] && data[2])
>>  411                 writel_relaxed(
>>  412                         ((data[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
>>  413                         ((data[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
>>  414                         ((data[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
>>  415                         l2x0_base + L2X0_DATA_LATENCY_CTRL);
>>  416
>>  417         of_property_read_u32_array(np, "arm,filter-ranges",
>>  418                                    filter, ARRAY_SIZE(filter));
>>  419         if (filter[0] && filter[1]) {
>>  420                 writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M),
>>  421                                l2x0_base + L2X0_ADDR_FILTER_END);
>>  422                 writel_relaxed((filter[0] & ~(SZ_1M - 1)) |
>> L2X0_ADDR_FILTER_EN,
>>  423                                l2x0_base + L2X0_ADDR_FILTER_START);
>>  424         }
>>  425 }
>>
>> not all l2 have all these registers. for example, it seems only prima2
>> has L2X0_ADDR_FILTER_START/END by now. and only some platforms set
>> latency too.
>
> Save them as normal.  If there aren't the values in DT, read them in the
> above functions and save the value.  Then...
>
>> > and we can do a similar thing when initializing the PL310 and resuming
>> > the PL310 - add a new outer_cache callback called 'resume' to be pointed
>> > at the relevant resume function which knows which registers to restore.
>
> Do that.
>
>> in my last reply, i also suggested this:
>> struct outer_cache_fns {
>>        void (*inv_range)(unsigned long, unsigned long);
>>        void (*clean_range)(unsigned long, unsigned long);
>>        void (*flush_range)(unsigned long, unsigned long);
>>        void (*flush_all)(void);
>>        void (*inv_all)(void);
>>        void (*disable)(void);
>> #ifdef CONFIG_OUTER_CACHE_SYNC
>>        void (*sync)(void);
>> #endif
>>        void (*set_debug)(unsigned long);
>>  +       void (*save)(void);
>>  +      void (*restore)(void);
>> };
>>
>> but it looks we only need resume since we can save all in init phase:
>
> Correct.
Do you think the following is what you want?

 {
@@ -280,7 +288,7 @@ static void l2x0_disable(void)
 	spin_unlock_irqrestore(&l2x0_lock, flags);
 }

-static void __init l2x0_unlock(__u32 cache_id)
+static void l2x0_unlock(__u32 cache_id)
 {
 	int lockregs;
 	int i;
@@ -356,6 +364,8 @@ void __init l2x0_init(void __iomem *base, __u32
aux_val, __u32 aux_mask)
 		/* l2x0 controller is disabled */
 		writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL);

+		l2x0_aux_ctrl = aux;
+
 		l2x0_inv_all();

 		/* enable L2X0 */
@@ -445,18 +455,64 @@ static void __init pl310_of_setup(const struct
device_node *np,
 	}
 }

+static void __init pl310_save(void)
+{
+	l2x0_tag_latency = readl_relaxed(l2x0_base + L2X0_TAG_LATENCY_CTRL);
+	l2x0_data_latency = readl_relaxed(l2x0_base + L2X0_DATA_LATENCY_CTRL);
+	l2x0_filter_end = readl_relaxed(l2x0_base + L2X0_ADDR_FILTER_END);
+	l2x0_filter_start = readl_relaxed(l2x0_base + L2X0_ADDR_FILTER_START);
+}
+
+static void l2x0_resume(void)
+{
+	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
+		/* restore aux ctrl and enable l2 */
+		l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID));
+
+		writel_relaxed(l2x0_aux_ctrl, l2x0_base + L2X0_AUX_CTRL);
+
+		l2x0_inv_all();
+
+		writel_relaxed(1, l2x0_base + L2X0_CTRL);
+	}
+}
+
+static void pl310_resume(void)
+{
+	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
+		/* restore pl310 setup */
+		writel_relaxed(l2x0_tag_latency, l2x0_base + L2X0_TAG_LATENCY_CTRL);
+		writel_relaxed(l2x0_data_latency, l2x0_base + L2X0_DATA_LATENCY_CTRL);
+		writel_relaxed(l2x0_filter_end, l2x0_base + L2X0_ADDR_FILTER_END);
+		writel_relaxed(l2x0_filter_start, l2x0_base + L2X0_ADDR_FILTER_START);
+	}
+
+	l2x0_resume();
+}
+
+static const struct l2x0_of_data pl310_data = {
+	pl310_of_setup,
+	pl310_save,
+	pl310_resume,
+};
+
+static const struct l2x0_of_data l2x0_data = {
+	l2x0_of_setup,
+	NULL,
+	l2x0_resume,
+};
+
 static const struct of_device_id l2x0_ids[] __initconst = {
-	{ .compatible = "arm,pl310-cache", .data = pl310_of_setup },
-	{ .compatible = "arm,l220-cache", .data = l2x0_of_setup },
-	{ .compatible = "arm,l210-cache", .data = l2x0_of_setup },
+	{ .compatible = "arm,pl310-cache", .data = (void *)&pl310_data },
+	{ .compatible = "arm,l220-cache", .data = (void *)&l2x0_data },
+	{ .compatible = "arm,l210-cache", .data = (void *)&l2x0_data },
 	{}
 };

 int __init l2x0_of_init(__u32 aux_val, __u32 aux_mask)
 {
 	struct device_node *np;
-	void (*l2_setup)(const struct device_node *np,
-		__u32 *aux_val, __u32 *aux_mask);
+	struct l2x0_of_data *data;

 	np = of_find_matching_node(NULL, l2x0_ids);
 	if (!np)
@@ -465,13 +521,20 @@ int __init l2x0_of_init(__u32 aux_val, __u32 aux_mask)
 	if (!l2x0_base)
 		return -ENOMEM;

+	data = of_match_node(l2x0_ids, np)->data;
+
 	/* L2 configuration can only be changed if the cache is disabled */
 	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
-		l2_setup = of_match_node(l2x0_ids, np)->data;
-		if (l2_setup)
-			l2_setup(np, &aux_val, &aux_mask);
+		if (data->setup)
+			data->setup(np, &aux_val, &aux_mask);
 	}
+
+	if (data->save)
+		data->save();
+
 	l2x0_init(l2x0_base, aux_val, aux_mask);
+
+	outer_cache.resume = data->resume;
 	return 0;
 }
 #endif


-barry
diff mbox

Patch

diff --git a/arch/arm/include/asm/outercache.h
b/arch/arm/include/asm/outercache.h
index d838743..53426c6 100644
--- a/arch/arm/include/asm/outercache.h
+++ b/arch/arm/include/asm/outercache.h
@@ -34,6 +34,7 @@  struct outer_cache_fns {
 	void (*sync)(void);
 #endif
 	void (*set_debug)(unsigned long);
+	void (*resume)(void);
 };

 #ifdef CONFIG_OUTER_CACHE
@@ -74,6 +75,12 @@  static inline void outer_disable(void)
 		outer_cache.disable();
 }

+static inline void outer_resume(void)
+{
+	if (outer_cache.resume)
+		outer_cache.resume();
+}
+
 #else

 static inline void outer_inv_range(phys_addr_t start, phys_addr_t end)
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 0d85d22..4722707 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -32,6 +32,14 @@  static void __iomem *l2x0_base;
 static DEFINE_SPINLOCK(l2x0_lock);
 static uint32_t l2x0_way_mask;	/* Bitmask of active ways */
 static uint32_t l2x0_size;
+static u32 l2x0_aux_ctrl;
+static u32 l2x0_tag_latency, l2x0_data_latency, l2x0_filter_start,
l2x0_filter_end;
+
+struct l2x0_of_data {
+	void (*setup)(const struct device_node *,__u32 *, __u32 *);
+	void (*save)(void);
+	void (*resume)(void);
+};

 static inline void cache_wait_way(void __iomem *reg, unsigned long mask)