mbox series

[GIT,PULL,4/6] i.MX arm64 device tree changes for 5.16

Message ID 20211016140138.1603-4-shawnguo@kernel.org
State New
Headers show
Series [GIT,PULL,1/6] i.MX DT bindings update for 5.16 | expand

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.16

Message

Shawn Guo Oct. 16, 2021, 2:01 p.m. UTC
The following changes since commit 6880fa6c56601bb8ed59df6c30fd390cc5f6dd8f:

  Linux 5.15-rc1 (2021-09-12 16:28:37 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.16

for you to fetch changes up to ec1e91d400bf21def54c441552bdf2976ce36e3b:

  arm64: dts: imx8mm-kontron: Add support for ultra high speed modes on SD card (2021-10-16 15:28:27 +0800)

----------------------------------------------------------------
i.MX arm64 device tree changes for 5.16:

- New board support: LX2160A based BlueBox3, S32G2 EVB and RDB2 boards.
- Quite some updates on imx8mq-librem5 board: delay the startup of the
  SDIO, add power sequencing for M.2 cards, add wifi regulator, add
  panel reset GPIO, fix led_r and led_g pinctrl, etc.
- Fix the SPI chipselect polarity for a couple of i.MX8MM boards.
- Add GPU nodes for i.MX8MM 2D and 3D core.
- Add VPU and DISP blk-ctrl devices for i.MX8MM.
- A series from Michael Walle to LS1028A device trees and add GPU
  support.
- Random and small updates on various boards.

----------------------------------------------------------------
Angus Ainslie (3):
      arm64: dts: imx8mq-librem5: delay the startup of the SDIO
      arm64: dts: imx8mq-librem5: add power sequencing for M.2 cards
      arm64: dts: imx8mq-librem5: Limit the max sdio frequency

Chester Lin (4):
      arm64: dts: add NXP S32G2 support
      arm64: dts: s32g2: add serial/uart support
      arm64: dts: s32g2: add VNP-EVB and VNP-RDB2 support
      arm64: dts: s32g2: add memory nodes for evb and rdb2

Fabio Estevam (2):
      arm64: dts: imx8mm-kontron-n801x-som: Fix the SPI chipselect polarity
      arm64: dts: imx8mm-venice: Fix the SPI chipselect polarity

Frieder Schrempf (3):
      arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core
      arm64: dts: imx8mm-kontron: Fix reset delays for ethernet PHY
      arm64: dts: imx8mm-kontron: Add support for ultra high speed modes on SD card

Guido Günther (1):
      arm64: dts: imx8mq-librem5: wire up the wifi regulator

Krzysztof Kozlowski (1):
      arm64: dts: freescale: imx8mq-librem5: align operating-points table name with dtschema

Kuldeep Singh (2):
      arm64: dts: imx8mp: Reorder flexspi clock-names entry
      arm64: dts: ls1012a: Add serial alias for ls1012a-rdb

Lucas Stach (6):
      arm64: dts: imx8mq-reform2: add uSDHC2 CD pinctrl
      arm64: dts: zii-ultra: add PCIe PHY supply
      arm64: dts: imx8mm: add GPC node
      arm64: dts: imx8mm: put USB controllers into power-domains
      arm64: dts: imx8mm: add VPU blk-ctrl
      arm64: dts: imx8mm: add DISP blk-ctrl

Martin Kepplinger (1):
      arm64: dts: imx8mq-librem5: add reset gpio to mantix panel description

Michael Walle (7):
      arm64: dts: freescale: fix arm,sp805 compatible string
      arm64: dts: ls1028a: move pixel clock pll into /soc
      arm64: dts: ls1028a: move Mali DP500 node into /soc
      arm64: dts: ls1028a: add Vivante GPU node
      arm64: dts: ls1028a: disable usb controller by default
      arm64: dts: ls1028a: move PHY nodes to MDIO controller
      arm64: dts: ls1028a: use phy-mode instead of phy-connection-type

Richard Zhu (1):
      arm64: dts: imx8mq: fix the schema check errors

Rob Herring (1):
      arm64: dts: freescale: Fix 'interrupt-map' parent address cells

Sebastian Krzyszkowiak (2):
      arm64: dts: imx8mq-librem5: Fix led_r and led_g pinctrl assignments
      arm64: dts: imx8mq-librem5: set debounce interval of volume buttons to 50ms

Tim Harvey (1):
      arm64: dts: imx8mm-venice-gw7901.dts: disable pgc_gpumix

Vladimir Oltean (1):
      arm64: dts: ls1028a: mark internal links between Felix and ENETC as capable of flow control

Wasim Khan (1):
      arm64: dts: add device tree for the LX2160A on the NXP BlueBox3 board

 arch/arm64/boot/dts/freescale/Makefile             |   4 +
 arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts  |   1 +
 .../freescale/fsl-ls1028a-kontron-sl28-var1.dts    |  60 +-
 .../freescale/fsl-ls1028a-kontron-sl28-var2.dts    |  17 +-
 .../freescale/fsl-ls1028a-kontron-sl28-var4.dts    |  49 +-
 .../dts/freescale/fsl-ls1028a-kontron-sl28.dts     |  31 +-
 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts  |  10 +-
 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts  |  19 +-
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi     |  72 ++-
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi     |  40 +-
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi     |  40 +-
 .../dts/freescale/fsl-lx2160a-bluebox3-rev-a.dts   |  34 ++
 .../boot/dts/freescale/fsl-lx2160a-bluebox3.dts    | 658 +++++++++++++++++++++
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi     |  24 +-
 .../boot/dts/freescale/imx8mm-kontron-n801x-s.dts  |  32 +-
 .../dts/freescale/imx8mm-kontron-n801x-som.dtsi    |   4 +-
 .../boot/dts/freescale/imx8mm-venice-gw71xx.dtsi   |   2 +-
 .../boot/dts/freescale/imx8mm-venice-gw72xx.dtsi   |   2 +-
 .../boot/dts/freescale/imx8mm-venice-gw73xx.dtsi   |   2 +-
 .../boot/dts/freescale/imx8mm-venice-gw7901.dts    |  24 +
 arch/arm64/boot/dts/freescale/imx8mm.dtsi          | 180 ++++++
 arch/arm64/boot/dts/freescale/imx8mp.dtsi          |   2 +-
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi  |  46 +-
 .../boot/dts/freescale/imx8mq-mnt-reform2.dts      |   1 +
 .../arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi |   2 +
 arch/arm64/boot/dts/freescale/imx8mq.dtsi          |  10 +-
 arch/arm64/boot/dts/freescale/s32g2.dtsi           | 124 ++++
 arch/arm64/boot/dts/freescale/s32g274a-evb.dts     |  34 ++
 arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts    |  40 ++
 29 files changed, 1374 insertions(+), 190 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3-rev-a.dts
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts
 create mode 100644 arch/arm64/boot/dts/freescale/s32g2.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/s32g274a-evb.dts
 create mode 100644 arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts

Comments

Arnd Bergmann Oct. 20, 2021, 2:50 p.m. UTC | #1
From: Arnd Bergmann <arnd@arndb.de>

On Sat, 16 Oct 2021 22:01:36 +0800, Shawn Guo wrote:
> The following changes since commit 6880fa6c56601bb8ed59df6c30fd390cc5f6dd8f:
> 
>   Linux 5.15-rc1 (2021-09-12 16:28:37 -0700)
> 
> are available in the Git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.16
> 
> [...]

Merged into arm/dt, thanks!

merge commit: 8d2214d3a64cdbe5d1b6e1afbcc3ad4d5ca0f396

       Arnd