mbox series

[GIT,PULL,4/6] i.MX device tree change for 5.13

Message ID 20210331041019.31345-4-shawnguo@kernel.org
State New
Headers show
Series [GIT,PULL,1/6] i.MX drivers change for 5.13 | expand

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.13

Message

Shawn Guo March 31, 2021, 4:10 a.m. UTC 
The following changes since commit a38fd8748464831584a19438cbb3082b5a2dab15:

  Linux 5.12-rc2 (2021-03-05 17:33:41 -0800)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.13

for you to fetch changes up to 45b78dd39f04f6198f8e2e9fe9d155a5e8326aab:

  ARM: dts: imx6: pbab01: Set USB OTG port to peripheral (2021-03-30 16:33:16 +0800)

----------------------------------------------------------------
i.MX device tree change for 5.13:

- New board support: i.MX7D based reMarkable2.
- Clean up imx6ql-pfla02 hog group by moving pins into corresponded
  client groups.
- Add Netronix embedded controller for imx50-kobo-aura.
- A series from Sebastian Reichel to improve GE Bx50v3 device trees.
- Support I2C bus recovery for imx6qdl-wandboard by adding SCL/SDA
  GPIOs.
- Remove unnecessary #address-cells/#size-cells from imx6qdl-gw boards.
- Various small and random device tree update.

----------------------------------------------------------------
Alexander Shiyan (3):
      ARM: dts: imx6qdl-ts7970: Drop redundant "fsl,mode" option
      ARM: dts: imx6qdl-phytec-pbab01: Select synchronous mode for AUDMUX
      ARM: dts: imx6ql-pfla02: Move "hog" pins into corresponded pin groups

Alistair Francis (1):
      ARM: imx7d-remarkable2: Initial device tree for reMarkable2

Andreas Kemnade (1):
      ARM: dts: imx6sl-tolino-shine2hd: Add Netronix embedded controller

Dima Azarkin (1):
      ARM: dts: imx6qdl-wandboard: add scl/sda gpios definitions for i2c bus recovery

Fabio Estevam (3):
      ARM: dts: imx53-qsb: Describe the esdhc1 card detect pin
      ARM: dts: imx6dl-plybas: Fix gpio-keys W=1 warnings
      ARM: dts: imx7d-mba7: Remove unsupported PCI properties

Horia Geantă (1):
      ARM: dts: ls1021a: mark crypto engine dma coherent

Ian Ray (1):
      ARM: dts: imx: bx50v3: Define GPIO line names

Jonathan Neuschäfer (1):
      ARM: dts: imx50-kobo-aura: Add Netronix embedded controller

Philippe Schenker (1):
      ARM: dts: colibri-imx6ull: Change drive strength for usdhc2

Sebastian Reichel (4):
      ARM: dts: imx: Mark IIM as syscon on i.MX51/i.MX53
      ARM: dts: imx6q-ba16: add USB OTG VBUS enable GPIO
      ARM: dts: imx6q-ba16: improve PHY information
      ARM: dts: imx: bx50v3: i2c GPIOs are open drain

Serge Semin (1):
      ARM: dts: ls1021a: Harmonize DWC USB3 DT nodes name

Stefan Riedmueller (2):
      ARM: dts: imx6: pfla02: Fix USB vbus enable pinmuxing
      ARM: dts: imx6: pbab01: Set USB OTG port to peripheral

Tim Harvey (1):
      ARM: dts: imx6qdl-gw*: Remove unnecessary #address-cells/#size-cells

 arch/arm/boot/dts/Makefile                   |   1 +
 arch/arm/boot/dts/imx50-kobo-aura.dts        |  16 ++-
 arch/arm/boot/dts/imx51.dtsi                 |   2 +-
 arch/arm/boot/dts/imx53-qsb-common.dtsi      |   2 +
 arch/arm/boot/dts/imx53.dtsi                 |   2 +-
 arch/arm/boot/dts/imx6dl-plybas.dts          |   6 +-
 arch/arm/boot/dts/imx6q-b450v3.dts           |   5 +
 arch/arm/boot/dts/imx6q-b650v3.dts           |   5 +
 arch/arm/boot/dts/imx6q-b850v3.dts           |   5 +
 arch/arm/boot/dts/imx6q-ba16.dtsi            |  21 ++++
 arch/arm/boot/dts/imx6q-bx50v3.dtsi          |  12 +--
 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi        |   2 -
 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi        |   2 -
 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi        |   2 -
 arch/arm/boot/dts/imx6qdl-gw551x.dtsi        |   2 -
 arch/arm/boot/dts/imx6qdl-gw552x.dtsi        |   2 -
 arch/arm/boot/dts/imx6qdl-gw560x.dtsi        |   2 -
 arch/arm/boot/dts/imx6qdl-gw5903.dtsi        |   2 -
 arch/arm/boot/dts/imx6qdl-gw5904.dtsi        |   2 -
 arch/arm/boot/dts/imx6qdl-gw5907.dtsi        |   2 -
 arch/arm/boot/dts/imx6qdl-gw5910.dtsi        |   2 -
 arch/arm/boot/dts/imx6qdl-gw5912.dtsi        |   2 -
 arch/arm/boot/dts/imx6qdl-gw5913.dtsi        |   2 -
 arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi |   6 +-
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi |  38 +++----
 arch/arm/boot/dts/imx6qdl-ts7970.dtsi        |   1 -
 arch/arm/boot/dts/imx6qdl-wandboard.dtsi     |  24 ++++-
 arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts |   7 +-
 arch/arm/boot/dts/imx6ull-colibri.dtsi       |  12 +--
 arch/arm/boot/dts/imx7d-mba7.dts             |   2 -
 arch/arm/boot/dts/imx7d-remarkable2.dts      | 146 +++++++++++++++++++++++++++
 arch/arm/boot/dts/ls1021a.dtsi               |   3 +-
 32 files changed, 270 insertions(+), 70 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx7d-remarkable2.dts

Comments

Arnd Bergmann April 1, 2021, 8:15 p.m. UTC | #1 
From: Arnd Bergmann <arnd@arndb.de>

On Wed, 31 Mar 2021 12:10:17 +0800, Shawn Guo wrote:
> The following changes since commit a38fd8748464831584a19438cbb3082b5a2dab15:
> 
>   Linux 5.12-rc2 (2021-03-05 17:33:41 -0800)
> 
> are available in the Git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.13
> 
> [...]

Merged into arm/dt, thanks!

merge commit: 4f662ba2be220044bb965f36826723c8f1e14eec

       Arnd