[GIT,PULL] Qualcomm ARM64 DT updates for v5.6

The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a:

  Linux 5.5-rc1 (2019-12-08 14:57:55 -0800)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm64-for-5.6

for you to fetch changes up to f489b13dae02a0217b9702913074526d3669bdc8:

  arm64: dts: qcom: sdm845: move gpu zap nodes to per-device dts (2020-01-13 11:45:51 -0800)

----------------------------------------------------------------
Qualcomm ARM64 DT updates for v5.6

* Align SDM845 firmware paths with linux-firmware
* Make WiFi work on Dragonboard845c
* Wire up wakeup controller for SDM845
* Critical thermal interrupt support for SDM845, MSM8996 and MSM8998
* Enable UFS for SM8150
* Add remoteproc enablers and nodes for SM8150
* Add CPUfreq for SM8150
* Add RPMH power-domain node for SM8150
* Cleanup and refactor MSM8996 dts structure
* Add initial Inforce Computing IFC6640 dts
* Increase MSM8996 core voltage
* Fix MSM8996 USB phy settings
* Add missing alias for BLSP UART in MSM8998 MTP
* Add remoteproc nodes for ADSP, modem and sensor core for MSM8998
* Enable WiFI for MSM8998
* Introduce the SC7180 platform and the IDP development board
* Add CPUfreq, QUPs, USB, remoteproc etc for SC7180
* Enable USB OTG for Dragonboard 410c
* Add vibrator motor node for PM8916
* Properly specify APCS clocks for MSM8916
* Add CPR and HFPLL for QCS404
* Enable full CPUfreq (with AVS) for QCS404

----------------------------------------------------------------
Amit Kucheria (4):
      arm64: dts: sdm845: thermal: Add critical interrupt support
      arm64: dts: msm8916: thermal: Add interrupt support
      arm64: dts: msm8996: thermal: Add critical interrupt support
      arm64: dts: msm8998: thermal: Add critical interrupt support

AngeloGioacchino Del Regno (1):
      arm64: dts: pm8004: Add SPMI regulator and add phandles to lsids

Bjorn Andersson (15):
      arm64: dts: qcom: db845c: Enable ath10k 8bit host-cap quirk
      arm64: dts: qcom: db820c: Move non-soc entries out of /soc
      arm64: dts: qcom: msm8996: Use node references in db820c
      arm64: dts: qcom: msm8996: Move regulator consumers to db820c
      arm64: dts: qcom: msm8996: Move regulators to db820c
      arm64: dts: qcom: db820c: Group root nodes
      arm64: dts: qcom: db820c: Sort all nodes
      arm64: dts: qcom: db820c: Remove pin specific files
      arm64: dts: qcom: msm8996: Pad addresses
      arm64: dts: qcom: msm8996: Sort all nodes in msm8996.dtsi
      arm64: dts: qcom: db820c: Use regulator names from schematics
      arm64: dts: qcom: msm8996: Introduce IFC6640
      arm64: dts: qcom: db845c: Move remoteproc firmware to sdm845
      arm64: dts: qcom: msm8998-mtp: Add alias for blsp1_uart3
      arm64: dts: qcom: sm8150: Hard code rpmhpd constants

Douglas Anderson (9):
      arm64: dts: sc7180: Fix indentation/ordering of qspi nodes in sc7180-idp
      arm64: dts: sc7180: Add a comment to i2c7 about external pullup
      arm64: dts: qcom: sc7180: Add SoC name to compatible
      arm64: dts: qcom: sc7180: Rename gic-its node to msi-controller
      arm64: dts: qcom: sc7180: Add "#clock-cells" property to usb_1_ssphy
      arm64: dts: qcom: pm6150: Remove macro from unit name of adc-chan
      arm64: dts: qcom: sc7180: Avoid "phy" for USB QMP PHY wrapper
      arm64: dts: qcom: sc7180: Fix I2C/UART numbers 2, 4, 7, and 9
      arm64: dts: qcom: sdm845: Rename gic-its node to msi-controller

Jeffrey Hugo (6):
      arm64: dts: qcom: msm8998: Add anoc2 smmu node
      arm64: dts: qcom: msm8998: Add wifi node
      arm64: dts: qcom: msm8998: Fix tcsr syscon size
      arm64: dts: qcom: msm8998: Add gpucc node
      arm64: dts: qcom: msm8998: Fixup uart3 gpio config for bluetooth
      arm64: dts: msm8998-clamshell: Add pm8005_s1 regulator

Jorge Ramirez-Ortiz (4):
      arm64: dts: qcom: msm8916: Add the clocks for the APCS mux/divider
      arm64: dts: qcom: qcs404: Add HFPLL node
      arm64: dts: qcom: qcs404: Add the clocks for APCS mux/divider
      arm64: dts: qcom: qcs404: Add DVFS support

Kiran Gunda (3):
      arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device
      arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals
      arm64: dts: qcom: sc7180-idp: Add RPMh regulators

Lina Iyer (2):
      arm64: dts: qcom: add PDC interrupt controller for SDM845
      arm64: dts: qcom: setup PDC as the wakeup parent for TLMM on SDM845

Loic Poulain (2):
      arm: dts: qcom: db410c: Enable USB OTG support
      arm64: dts: apq8096-db820c: Fix VDD core voltage

Manu Gautam (1):
      arm64: dts: qcom: msm8996: Disable USB2 PHY suspend by core

Matthias Kaehlcke (1):
      arm64: dts: qcom: sc7180: Fix node order

Maulik Shah (4):
      arm64: dts: qcom: sc7180: Add cmd_db reserved area
      arm64: dts: qcom: sc7180: Add rpmh-rsc node
      arm64: dts: qcom: sc7180: Add pdc interrupt controller
      arm64: dts: qcom: sc7180: Add wakeup parent for TLMM

Niklas Cassel (2):
      arm64: dts: qcom: qcs404: Add CPR and populate OPP table
      arm64: dts: qcom: qcs404-evb: Set vdd_apc regulator in high power mode

Rajendra Nayak (4):
      dt-bindings: qcom: Add SC7180 bindings
      arm64: dts: sc7180: Add minimal dts/dtsi files for SC7180 soc
      arm64: dts: sc7180: Remove additional spi chip select muxes
      arm64: dts: sc7180: Add aliases for all i2c and spi devices

Rajeshwari (2):
      arm64: dts: qcom: sc7180: Add device node support for TSENS in SC7180
      arm64: dts: qcom: sc7180: Add critical interrupt and cooling maps for TSENS in SC7180

Rob Clark (1):
      arm64: dts: qcom: sdm845: move gpu zap nodes to per-device dts

Roja Rani Yarubandi (1):
      arm64: dts: sc7180: Add qupv3_0 and qupv3_1

Sai Prakash Ranjan (5):
      arm64: dts: sdm845: Update the device tree node for LLCC
      arm64: dts: qcom: sc7180: Add APSS watchdog node
      arm64: dts: qcom: sm8150: Add APSS watchdog node
      arm64: dts: qcom: sc7180: Add Last level cache controller node
      arm64: dts: qcom: qcs404: Update the compatible for watchdog timer

Sandeep Maheswaram (1):
      arm64: dts: qcom: sc7180: Add USB related nodes

Sibi Sankar (8):
      arm64: dts: sm8150: Add rpmh power-domain node
      arm64: dts: qcom: sm8150: Add ADSP, CDSP, MPSS and SLPI smp2p
      arm64: dts: qcom: sm8150: Add ADSP, CDSP, MPSS and SLPI remoteprocs
      arm64: dts: qcom: sm8150: Add cpufreq HW device node
      arm64: dts: qcom: sc7180: Add remoteproc enablers
      arm64: dts: qcom: msm8998: Update reserved memory map
      arm64: dts: qcom: msm8998: Add ADSP, MPSS and SLPI nodes
      arm64: dts: qcom: sc7180: Add rpmh power-domain node

Stanimir Varbanov (1):
      arm64: dts: qcom: msm8996: Fix venus iommu nodename error

Stephan Gerhold (1):
      arm64: dts: qcom: pm8916: Add vibration motor node

Stephen Boyd (1):
      arm64: dts: qcom: sdm845-cheza: Add cr50 spi node

Taniya Das (2):
      arm64: dts: qcom: SC7180: Add node for rpmhcc clock driver
      arm64: dts: sc7180: Add cpufreq HW node for cpu scaling

Vinod Koul (6):
      arm64: dts: qcom: Use gcc clock enums
      arm64: dts: qcom: sm8150: Add ufs nodes
      arm64: dts: qcom: sm8150-mtp: Enable UFS nodes
      arm64: dts: qcom: sm8150-mtp: Add UFS gpio reset
      arm64: dts: qcom: sm8150: Fix UFS phy register size
      arm64: dts: qcom: sdm845: add the ufs reset

Vivek Gautam (1):
      arm64: dts: sc7180: Add device node for apps_smmu

 Documentation/devicetree/bindings/arm/qcom.yaml    |   44 +-
 arch/arm64/boot/dts/qcom/Makefile                  |    2 +
 .../arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi |   19 +
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi          |   11 +-
 arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi  |  109 -
 .../boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi    |   92 -
 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi       | 1408 +++++---
 arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts       |  385 +++
 arch/arm64/boot/dts/qcom/msm8916.dtsi              |    5 +-
 arch/arm64/boot/dts/qcom/msm8996.dtsi              | 3530 ++++++++++----------
 arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi    |   49 +
 arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi          |   41 +
 arch/arm64/boot/dts/qcom/msm8998-pins.dtsi         |   25 +-
 arch/arm64/boot/dts/qcom/msm8998.dtsi              |  262 +-
 arch/arm64/boot/dts/qcom/pm6150.dtsi               |   72 +
 arch/arm64/boot/dts/qcom/pm6150l.dtsi              |   31 +
 arch/arm64/boot/dts/qcom/pm8004.dtsi               |   10 +-
 arch/arm64/boot/dts/qcom/pm8916.dtsi               |    6 +
 arch/arm64/boot/dts/qcom/pm8994.dtsi               |    4 +
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi           |    1 +
 arch/arm64/boot/dts/qcom/qcs404.dtsi               |  160 +-
 arch/arm64/boot/dts/qcom/sc7180-idp.dts            |  430 +++
 arch/arm64/boot/dts/qcom/sc7180.dtsi               | 2187 ++++++++++++
 arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi         |   15 +-
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts         |   18 +-
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts            |    7 +
 arch/arm64/boot/dts/qcom/sdm845.dtsi               |   32 +-
 .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts      |    7 +
 arch/arm64/boot/dts/qcom/sm8150-mtp.dts            |   35 +
 arch/arm64/boot/dts/qcom/sm8150.dtsi               |  391 ++-
 30 files changed, 6766 insertions(+), 2622 deletions(-)
 delete mode 100644 arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
 delete mode 100644 arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
 create mode 100644 arch/arm64/boot/dts/qcom/pm6150.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pm6150l.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180-idp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180.dtsi