mbox series

[GIT,PULL,5/7] i.MX arm32 device tree changes for 5.4

Message ID 20190825153237.28829-5-shawnguo@kernel.org
State New
Headers show
Series [GIT,PULL,1/7] i.MX drivers update for 5.4 | expand

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.4

Message

Shawn Guo Aug. 25, 2019, 3:32 p.m. UTC
The following changes since commit 5f9e832c137075045d15cd6899ab0505cfb2ca4b:

  Linus 5.3-rc1 (2019-07-21 14:05:38 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.4

for you to fetch changes up to b04f537caab4deae1b839438e8fd5ed4bc598b43:

  ARM: dts: vf610-zii-scu4-aib: Configure IRQ line for GPIO expander (2019-08-25 09:15:17 +0200)

----------------------------------------------------------------
i.MX arm32 device tree changes for 5.4:
 - New board support: ZII i.MX7 RMU2, Kontron i.MX6UL N6310, and
   PHYTEC phyBOARD-Segin based on i.MX6ULL.
 - A series from Andrey Smirnov to update vf610-zii boards on I2C
   pinmux, switch watchdog, GPIO expander IRQ.
 - Move GIC node into soc node for i.MX6 SoCs.
 - Add OV5645 camera support for imx6qdl-wandboard board.
 - Drop unneeded snvs_pwrkey node for imx7d-zii-rpu2 and imx7-colibri.
 - Use simple-mfd instead of simple-bus for i.MX6 ANATOP.
 - Move the native-mode property inside the display-timings node for
   various i.MX25 and i.MX27 boards.
 - Add EDMA devices for i.MX7ULP SoC.
 - A series from Stefan Riedmueller to update imx6ul-phytec-segin board
   on various devices.
 - Use OF graph to describe the display for opos6uldev board.
 - Misc random updates on i.MX7/6 boards.

----------------------------------------------------------------
Alexandre Belloni (1):
      ARM: dts: pbab01: correct rtc vendor

Andrey Smirnov (7):
      ARM: dts: Add ZII support for ZII i.MX7 RMU2 board
      ARM: dts: vf610-zii-spb4: Drop unused pinctrl_i2c1 pinmux config
      ARM: dts: vf610-zii-scu4-aib: Fix pinctrl_i2c1's identation
      ARM: dts: vf610-zii-scu4-aib: Drop unused pinctrl_i2c3 pinmux config
      ARM: vf610-zii-cfu1: Add node for switch watchdog
      ARM: dts: vf610-zii-cfu1: Slow I2C0 down to 100 kHz
      ARM: dts: vf610-zii-scu4-aib: Configure IRQ line for GPIO expander

André Draszik (2):
      ARM: dts: imx7d: cl-som-imx7: make ethernet work again
      ARM: dts: imx7d: cl-som-imx7: add compatible for phy

Anson Huang (4):
      ARM: dts: imx6sx: move GIC to right location in DT
      ARM: dts: imx6sl: move GIC to right location in DT
      ARM: dts: imx6ul: move GIC to right location in DT
      ARM: dts: imx6sll: move GIC to right location in DT

Ezequiel Garcia (1):
      ARM: dts: imx6qdl-wandboard: Add OV5645 camera support

Fabio Estevam (3):
      ARM: dts: imx7d-zii-rpu2: Remove unneeded snvs_pwrkey node
      ARM: dts: imx7-colibri: Remove unneeded snvs_pwrkey node
      ARM: dts: imx6qdl-nit6xlite: Remove invalid properties

Krzysztof Kozlowski (2):
      ARM: dts: imx: Cleanup style around assignment operator
      ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards

Marcel Ziswiler (1):
      ARM: dts: imx7-colibri: make sure module supplies are always on

Marco Felsch (2):
      ARM: dts: imx6: replace simple-bus by simple-mfd for anatop
      ARM: dts: imx6: drop gpmi-nand address and size cells

Marek Vasut (1):
      ARM: dts: imx53: Update LCD panel node on M53Menlo

Martin Kaiser (9):
      ARM: dts: imx25-pdk: native-mode is part of display-timings
      ARM: dts: imx27 phyCARD-S: native-mode is part of display-timings
      ARM: dts: imx25: mbimxsd25: native-mode is part of display-timings
      ARM: dts: eukrea-mbimxsd27: native-mode is part of display-timings
      ARM: dts: mbimxsd25: native-mode is part of display-timings
      ARM: dts: imx27-phytec-phycore-rdk: native-mode is part of display-timings
      ARM: dts: edb7211: native-mode is part of display-timings
      ARM: dts: apf27dev: native-mode is part of display-timings
      ARM: dts: imx25: mbimxsd25: native-mode is part of display-timings

Oleksandr Suvorov (1):
      ARM: dts: imx7-colibri: add recovery for I2C for iMX7

Philippe Schenker (3):
      ARM: dts: imx7-colibri: prepare module device tree for FlexCAN
      ARM: dts: imx7-colibri: Add sleep pinctrl to ethernet
      ARM: dts: imx6qdl-colibri: add phy to fec

Robin Gong (3):
      ARM: dts: imx6ul: add dma support on ecspi
      ARM: dts: imx6sll: correct sdma compatible
      ARM: dts: imx7ulp: add edma device node

Stefan Agner (1):
      ARM: dts: imx7-colibri: disable HS400

Stefan Riedmueller (10):
      ARM: dts: imx6ul: phyboard-segin: Rename dts to PHYTEC name scheme
      ARM: dts: imx6ul: segin: Add boot media to dts filename
      ARM: dts: imx6ul: segin: Reduce eth drive strength
      ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01
      ARM: dts: imx6ul: segin: Make FEC and ethphy configurable in dts
      ARM: dts: imx6ul: segin: Only enable NAND if it is populated
      ARM: dts: imx6ul: phycore: Add eMMC at usdhc2
      ARM: dts: imx6ul: segin: Move ECSPI interface to board include file
      ARM: dts: imx6ul: segin: Move machine include to dts files
      ARM: dts: imx6ull: Add support for PHYTEC phyBOARD-Segin with i.MX 6ULL

Sébastien Szymanski (2):
      ARM: dts: opos6uldev: use OF graph to describe the display
      ARM: dts: imx6ul: Add csi node

 arch/arm/boot/dts/Makefile                         |   8 +-
 arch/arm/boot/dts/ep7211-edb7211.dts               |   2 +-
 .../imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts  |   2 +-
 .../imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts  |   2 +-
 .../imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts   |   2 +-
 arch/arm/boot/dts/imx25-pdk.dts                    |   2 +-
 arch/arm/boot/dts/imx27-apf27dev.dts               |   2 +-
 .../boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts  |   2 +-
 arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts   |   2 +-
 arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts     |   2 +-
 arch/arm/boot/dts/imx53-m53menlo.dts               |   3 +-
 arch/arm/boot/dts/imx6qdl-colibri.dtsi             |  11 +
 arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi           |   2 -
 arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi       |   2 +-
 arch/arm/boot/dts/imx6qdl-wandboard.dtsi           |  73 +++-
 arch/arm/boot/dts/imx6qdl.dtsi                     |   4 +-
 arch/arm/boot/dts/imx6sl.dtsi                      |  18 +-
 arch/arm/boot/dts/imx6sll.dtsi                     |  24 +-
 arch/arm/boot/dts/imx6sx.dtsi                      |  22 +-
 arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts    | 102 +++++
 arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts       | 420 +++++++++++++++++++++
 arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi    | 134 +++++++
 arch/arm/boot/dts/imx6ul-opos6uldev.dts            |  37 +-
 ...-pcl063.dtsi => imx6ul-phytec-phycore-som.dtsi} |  53 ++-
 ...ull.dts => imx6ul-phytec-segin-ff-rdk-nand.dts} |  42 ++-
 ...1.dtsi => imx6ul-phytec-segin-peb-eval-01.dtsi} |  16 +-
 ...hyboard-segin.dtsi => imx6ul-phytec-segin.dtsi} |  31 +-
 arch/arm/boot/dts/imx6ul.dtsi                      |  53 ++-
 arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi  |  24 ++
 .../boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts  |  93 +++++
 .../boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts  |  93 +++++
 .../boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts  |  45 +++
 .../boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi |  19 +
 arch/arm/boot/dts/imx6ull-phytec-segin.dtsi        |  38 ++
 arch/arm/boot/dts/imx7-colibri.dtsi                |  86 ++++-
 arch/arm/boot/dts/imx7d-cl-som-imx7.dts            |   6 +-
 arch/arm/boot/dts/imx7d-zii-rmu2.dts               | 357 ++++++++++++++++++
 arch/arm/boot/dts/imx7d-zii-rpu2.dts               |   4 -
 arch/arm/boot/dts/imx7d.dtsi                       |   4 +-
 arch/arm/boot/dts/imx7s.dtsi                       |   6 +-
 arch/arm/boot/dts/imx7ulp.dtsi                     |  36 +-
 arch/arm/boot/dts/vf610-zii-cfu1.dts               |  21 +-
 arch/arm/boot/dts/vf610-zii-scu4-aib.dts           |  12 +-
 arch/arm/boot/dts/vf610-zii-spb4.dts               |   7 -
 44 files changed, 1741 insertions(+), 183 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
 create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
 create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
 rename arch/arm/boot/dts/{imx6ul-phytec-pcl063.dtsi => imx6ul-phytec-phycore-som.dtsi} (71%)
 rename arch/arm/boot/dts/{imx6ul-phytec-phyboard-segin-full.dts => imx6ul-phytec-segin-ff-rdk-nand.dts} (51%)
 rename arch/arm/boot/dts/{imx6ul-phytec-peb-eval-01.dtsi => imx6ul-phytec-segin-peb-eval-01.dtsi} (84%)
 rename arch/arm/boot/dts/{imx6ul-phytec-phyboard-segin.dtsi => imx6ul-phytec-segin.dtsi} (91%)
 create mode 100644 arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi
 create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
 create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
 create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
 create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
 create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
 create mode 100644 arch/arm/boot/dts/imx7d-zii-rmu2.dts

Comments

Arnd Bergmann Sept. 3, 2019, 2:10 p.m. UTC | #1
On Sun, Aug 25, 2019 at 5:33 PM Shawn Guo <shawnguo@kernel.org> wrote:
>

> ----------------------------------------------------------------
> i.MX arm32 device tree changes for 5.4:
>  - New board support: ZII i.MX7 RMU2, Kontron i.MX6UL N6310, and
>    PHYTEC phyBOARD-Segin based on i.MX6ULL.
>  - A series from Andrey Smirnov to update vf610-zii boards on I2C
>    pinmux, switch watchdog, GPIO expander IRQ.
>  - Move GIC node into soc node for i.MX6 SoCs.
>  - Add OV5645 camera support for imx6qdl-wandboard board.
>  - Drop unneeded snvs_pwrkey node for imx7d-zii-rpu2 and imx7-colibri.
>  - Use simple-mfd instead of simple-bus for i.MX6 ANATOP.
>  - Move the native-mode property inside the display-timings node for
>    various i.MX25 and i.MX27 boards.
>  - Add EDMA devices for i.MX7ULP SoC.
>  - A series from Stefan Riedmueller to update imx6ul-phytec-segin board
>    on various devices.
>  - Use OF graph to describe the display for opos6uldev board.
>  - Misc random updates on i.MX7/6 boards.

Pulled into arm/dt, thanks!

        Arnd