| Message ID | 20190625075305.29082-5-shawnguo@kernel.org |
|---|---|
| State | New |
| Headers | show |
| Series | [GIT,PULL,1/7] i.MX drivers change for 5.3 | expand |
On Tue, Jun 25, 2019 at 03:53:03PM +0800, Shawn Guo wrote: > The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9: > > Linux 5.2-rc1 (2019-05-19 15:47:09 -0700) > > are available in the Git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.3 > > for you to fetch changes up to 48cbd9ff53b7391111e8460c3d9307ba14a5f8c0: > > ARM: dts: imx7ulp-evk: enable USBOTG1 support (2019-06-24 23:12:18 +0800) > > ---------------------------------------------------------------- > i.MX arm32 DT changes for 5.3: > - New board support: iMX6-based Kontron SMARC-sAMX6i, i.MX7D based > Meerkat96 board, and NXP LS1021A-TSN board. > - A series from Andrey Smirnov to update vf610-zii-dev and > imx7d-zii-rpu2 board, fixing UART2 pin assignment and stdout-path, > adding QSPI device, and dropping unused pinmux. > - Update imx6sl and imx6qdl device tree to assign corresponding clocks > instead of dummy clock. > - Update i.MX6/7 boards from NXP to assign corresponding power supply > for LDOs. > - Update i.MX6/7 device trees to enable SNVS poweroff key support > according to board design. > - Update coresight DT binding for i.MX7 according to consolidations > for CoreSight replicator and funnel. > - A series from Marek Vasut to update M53Menlo board on various devices > like UART, USB, ethernet PHY, GPIOs etc. > - Enable USBOTG support for imx7ulp and evk board. > - A series from Peter Robinson to update imx6sx-udoo board, switching > to SPDX License Identifier, enabling I2C devices and bluetooth > support. > - Add video capture support for i.MX53 and imx53-smd board. > - Add PXP device for i.MX6UL. > - Other random small updates on various boards. Merged, thanks! -Olof
The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9: Linux 5.2-rc1 (2019-05-19 15:47:09 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.3 for you to fetch changes up to 48cbd9ff53b7391111e8460c3d9307ba14a5f8c0: ARM: dts: imx7ulp-evk: enable USBOTG1 support (2019-06-24 23:12:18 +0800) ---------------------------------------------------------------- i.MX arm32 DT changes for 5.3: - New board support: iMX6-based Kontron SMARC-sAMX6i, i.MX7D based Meerkat96 board, and NXP LS1021A-TSN board. - A series from Andrey Smirnov to update vf610-zii-dev and imx7d-zii-rpu2 board, fixing UART2 pin assignment and stdout-path, adding QSPI device, and dropping unused pinmux. - Update imx6sl and imx6qdl device tree to assign corresponding clocks instead of dummy clock. - Update i.MX6/7 boards from NXP to assign corresponding power supply for LDOs. - Update i.MX6/7 device trees to enable SNVS poweroff key support according to board design. - Update coresight DT binding for i.MX7 according to consolidations for CoreSight replicator and funnel. - A series from Marek Vasut to update M53Menlo board on various devices like UART, USB, ethernet PHY, GPIOs etc. - Enable USBOTG support for imx7ulp and evk board. - A series from Peter Robinson to update imx6sx-udoo board, switching to SPDX License Identifier, enabling I2C devices and bluetooth support. - Add video capture support for i.MX53 and imx53-smd board. - Add PXP device for i.MX6UL. - Other random small updates on various boards. ---------------------------------------------------------------- Andrey Smirnov (4): ARM: dts: vf610-zii-dev: Fix incorrect UART2 pin assignment ARM: dts: vf610-zii-dev: Add QSPI node ARM: dts: imx7d-zii-rpu2: Fix incorrrect 'stdout-path' ARM: dts: imx7d-zii-rpu2: Drop unused pinmux entries Anson Huang (17): ARM: dts: imx6sl: Assign corresponding clocks instead of dummy clock ARM: dts: imx6qdl: Assign corresponding clocks instead of dummy clock ARM: dts: imx7ulp: Add tpm pwm support ARM: dts: imx7ulp-evk: Add backlight support ARM: dts: imx6ul: add clock-frequency to CPU node ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs ARM: dts: imx7d-sdb: Assign corresponding power supply for LDOs ARM: dts: imx6sl-evk: Assign corresponding power supply for LDOs ARM: dts: imx6sll-evk: Assign corresponding power supply for vdd3p0 ARM: dts: imx6sx-sdb: Assign corresponding power supply for LDOs ARM: dts: imx7d-sdb: Make SW2's voltage fixed ARM: dts: imx6qdl: Enable SNVS power key according to board design ARM: dts: imx6sx: Enable SNVS power key according to board design ARM: dts: imx6ul: Enable SNVS power key according to board design ARM: dts: imx6sll: Enable SNVS power key according to board design ARM: dts: imx7s: Enable SNVS power key according to board design ARM: dts: imx6sll: Enable SNVS poweroff according to board design Igor Opaniuk (1): ARM: dts: imx6ull-colibri: enable UHS-I for USDHC1 Leo Yan (1): ARM: dts: imx7s: Update coresight DT bindings Leonard Crestez (1): ARM: dts: imx7d: Update cpufreq OPP table Manivannan Sadhasivam (1): ARM: dts: Add support for 96Boards Meerkat96 board Marek Vasut (9): ARM: dts: imx53: Update UART configuration on M53Menlo ARM: dts: imx53: Update USB configuration on M53Menlo ARM: dts: imx53: Add ethernet PHY reset on M53Menlo ARM: dts: imx53: Select netdev trigger for Yellow LED on M53Menlo ARM: dts: imx53: Add power GPIOs on M53Menlo ARM: dts: imx53: Add GPIO beeper on M53Menlo ARM: dts: imx53: Add GPIO line names on M53Menlo ARM: dts: imx53: Update pinmux settings on M53Menlo ARM: dts: imx53: Bind CPLD on M53Menlo Michael Grzeschik (1): ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support Peter Chen (2): ARM: dts: imx7ulp: add imx7ulp USBOTG1 support ARM: dts: imx7ulp-evk: enable USBOTG1 support Peter Robinson (3): ARM: dts: imx6sx-udoo: Use the correct style for SPDX License Identifier ARM: dts: imx6sx-udoo-neo: enable i2c-2 and i2c-4 for onboard sensors ARM: dts: imx6sx-udoo-neo: add bluetooth config to uart3 Priit Laes (1): ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module Rob Herring (1): ARM: dts: imx: Avoid colliding 'display' node and property names Steve Longerbeam (2): ARM: dts: imx53: Add capture-subsystem device ARM: dts: imx53-smd: Add OV5642 video capture support Sébastien Szymanski (1): ARM: dts: imx6ul: Add PXP node Vladimir Oltean (1): ARM: dts: Introduce the NXP LS1021A-TSN board arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imx53-m53menlo.dts | 266 ++++++-- arch/arm/boot/dts/imx53-smd.dts | 73 +++ arch/arm/boot/dts/imx53.dtsi | 12 + arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi | 12 + arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi | 36 ++ arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi | 815 +++++++++++++++++++++++++ arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 16 + arch/arm/boot/dts/imx6qdl.dtsi | 11 +- arch/arm/boot/dts/imx6sl-evk.dts | 12 + arch/arm/boot/dts/imx6sl.dtsi | 12 +- arch/arm/boot/dts/imx6sll-evk.dts | 12 + arch/arm/boot/dts/imx6sll.dtsi | 2 + arch/arm/boot/dts/imx6sx-sdb-reva.dts | 16 + arch/arm/boot/dts/imx6sx-sdb.dts | 16 + arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts | 39 +- arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts | 47 +- arch/arm/boot/dts/imx6sx-udoo-neo-full.dts | 47 +- arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 89 ++- arch/arm/boot/dts/imx6sx.dtsi | 7 +- arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 4 + arch/arm/boot/dts/imx6ul-geam.dts | 2 +- arch/arm/boot/dts/imx6ul-isiot.dtsi | 2 +- arch/arm/boot/dts/imx6ul.dtsi | 14 + arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi | 11 +- arch/arm/boot/dts/imx6ull-colibri.dtsi | 6 + arch/arm/boot/dts/imx6ull.dtsi | 7 + arch/arm/boot/dts/imx7d-meerkat96.dts | 375 ++++++++++++ arch/arm/boot/dts/imx7d-sdb.dts | 16 +- arch/arm/boot/dts/imx7d-zii-rpu2.dts | 16 +- arch/arm/boot/dts/imx7d.dtsi | 16 +- arch/arm/boot/dts/imx7s.dtsi | 11 +- arch/arm/boot/dts/imx7ulp-evk.dts | 55 ++ arch/arm/boot/dts/imx7ulp.dtsi | 38 ++ arch/arm/boot/dts/ls1021a-tsn.dts | 289 +++++++++ arch/arm/boot/dts/vf610-zii-dev.dtsi | 52 +- 36 files changed, 2198 insertions(+), 258 deletions(-) create mode 100644 arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi create mode 100644 arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi create mode 100644 arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi create mode 100644 arch/arm/boot/dts/imx7d-meerkat96.dts create mode 100644 arch/arm/boot/dts/ls1021a-tsn.dts