| Message ID | 20190211141333.28725-3-u.kleine-koenig@pengutronix.de |
|---|---|
| State | New |
| Headers | show |
| Series | [01/15] ARM: dts: imx6qdl-fdi-fs700-m60: Use explicit swpad values | expand |
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 2ffb21dd89f2..305dc4f11e3f 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -216,8 +216,8 @@ hummingboard { pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 { fsl,pins = < - MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000 - MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000 + MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x0001b0b0 + MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x0001b0b0 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi index e4231331f04e..af5f0cfa518b 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi @@ -366,7 +366,7 @@ pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9 { fsl,pins = < - MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000 + MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x0001b0b0 >; };
Instead of relying on reset defaults or a bootloader to configure use explicit values for the swpad configuration. Here the reset defaults are used owing to lack of other evidence. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- arch/arm/boot/dts/imx6qdl-hummingboard.dtsi | 4 ++-- arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)