@@ -555,7 +555,7 @@
pinctrl_mic_gnd: gpiomicgnd {
fsl,pins = <
/* Controls Mic GND, PU or '1' pull Mic GND to GND */
- MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b030
>;
};
@@ -607,7 +607,7 @@
pinctrl_touch_int: gpiotouchintgrp {
fsl,pins = <
/* STMPE811 interrupt */
- MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b030
>;
};
@@ -658,9 +658,9 @@
/* USBC_DET */
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
/* USBC_DET_EN */
- MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x0f058
+ MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x0f018
/* USBC_DET_OVERWRITE */
- MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x0f058
+ MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x0f018
>;
};
@@ -757,14 +757,14 @@
pinctrl_weim_rdnwr: weimrdnwr {
fsl,pins = <
MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x0040
- MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x130b0
+ MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x13030
>;
};
pinctrl_weim_npwe: weimnpwe {
fsl,pins = <
MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x0040
- MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x130b0
+ MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x13030
>;
};
Bits 6 and 7 of the RGMII_* swpad registers are not writeable and read as zero. So change the corresponding configuration values to write a zero to these bits. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- arch/arm/boot/dts/imx6qdl-colibri.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)