From patchwork Tue Nov 13 13:44:08 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 997104 Return-Path: X-Original-To: incoming-imx@patchwork.ozlabs.org Delivered-To: patchwork-incoming-imx@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=lists.infradead.org (client-ip=2607:7c80:54:e::133; helo=bombadil.infradead.org; envelope-from=linux-arm-kernel-bounces+incoming-imx=patchwork.ozlabs.org@lists.infradead.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=nic.cz Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="kUONgqbG"; dkim=fail reason="signature verification failed" (1024-bit key; secure) header.d=nic.cz header.i=@nic.cz header.b="ZPN1FEoA"; dkim-atps=neutral Received: from bombadil.infradead.org (bombadil.infradead.org [IPv6:2607:7c80:54:e::133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 42vTQ547Jgz9sBZ for ; Wed, 14 Nov 2018 00:44:45 +1100 (AEDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:Message-Id:Date:Subject:To :From:Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:In-Reply-To:References: List-Owner; bh=n/+kDerniOvjgwPV22FiYBsm3plaS6rF+VuTfITGKIY=; b=kUONgqbGmAr7dn o60nfzwdt49OpxpZgdUxLZcbXycCW2Sjqeltox/Qpa/PBhyhdSHwBt7jGSSQj7ytiUq+7eL0GnCYN vHvSfRc5rpvFr+qGURmMFV3m9ERybMoFXwJkI63vbfAd3Ns9o9XVddu4fv3d4XI8xpF3VoIt2zKsu xpeJc+YNsgB6RzvcPyBanfrsGU6lJmtBUybO7OJzdLR3BRFGzgGNlA9Sp7sgJ+q8b9oK674hRFRQZ 9ZTINGs2fVIl5oLSCsM+VyW+e/TdPLmgxUtuLQSXQjNGMVg4Di1HnEJOhngaJq7LmU7sDg33GLX52 1n3yeUgSVDsII/NwuRoA==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1gMYzg-0002Cg-DF; Tue, 13 Nov 2018 13:44:40 +0000 Received: from mail.nic.cz ([2001:1488:800:400::400]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gMYzb-0002Bm-A6 for linux-arm-kernel@lists.infradead.org; Tue, 13 Nov 2018 13:44:38 +0000 Received: from dellmb.labs.office.nic.cz (unknown [IPv6:2001:1488:fffe:6:cac7:3539:7f1f:463]) by mail.nic.cz (Postfix) with ESMTP id E3DE162C0B; Tue, 13 Nov 2018 14:44:19 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=nic.cz; s=default; t=1542116660; bh=v0ETVszvOwnCZ/Tb+oRgAjuR5oGW6cM2tHcHRwN0x7w=; h=From:To:Date; b=ZPN1FEoAFn9osWn+hiDn0txu+xIspxqaufpF6GqBGhe35lDlM6S21tJOfEwXlWySR D5KV16f71Ul4QEAss5s6WLNI4D8RmMMEne/8g1D8BgBli4AjvJqp7rmXK12Q8EgjBK SHMkgUufYf6n/2Szi25g6apXzvfoCuwV951iA6rE= From: =?utf-8?q?Marek_Beh=C3=BAn?= To: devicetree@vger.kernel.org Subject: [PATCH RFC] ARM64: dts: marvell: Add DTS file for Turris Mox Date: Tue, 13 Nov 2018 14:44:08 +0100 Message-Id: <20181113134408.5681-1-marek.behun@nic.cz> X-Mailer: git-send-email 2.18.1 MIME-Version: 1.0 X-Virus-Scanned: clamav-milter 0.99.2 at mail X-Virus-Status: Clean X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20181113_054435_650685_90AA7ACD X-CRM114-Status: GOOD ( 18.06 ) X-Spam-Score: -5.2 (-----) X-Spam-Report: SpamAssassin version 3.4.2 on bombadil.infradead.org summary: Content analysis details: (-5.2 points) pts rule name description ---- ---------------------- -------------------------------------------------- -5.0 RCVD_IN_DNSWL_HI RBL: Sender listed at http://www.dnswl.org/, high trust [2001:1488:800:400:0:0:0:400 listed in] [list.dnswl.org] -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Rob Herring , Andrew Lunn , Gregory CLEMENT , linux-kernel@vger.kernel.org, =?utf-8?q?Marek_Beh=C3=BAn?= , linux-arm-kernel@lists.infradead.org Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+incoming-imx=patchwork.ozlabs.org@lists.infradead.org List-Id: linux-imx-kernel.lists.patchwork.ozlabs.org This is a RFC, please do not merge. This adds basic support for the Turris Mox board from CZ.NIC. Turris Mox is as modular router based on the Armada 3720 SOC (same as EspressoBin). The basic module can be extended by different modules. When those modules are connected, U-Boot has to let kernel know via device-tree. Since modules can be connected in different order and some modules can be connected multiple times (up to three 8-port switch modules can be connected), using dtb overlays would result in too files. I therefore chose to put all the possible connected devices in one dts and disable them. If U-Boot finds these modules, it fixes the device tree accrodginly, by enabling some nodes (setting status to "okay") and by setting some addresses and references. For example there are 6 switch nodes - three for 8-port switch module and three for 4-port switch module. This is because another switch (either 8-port or 4-port) can be connected to a 8-port switch, in DSA, and interface names have to be defined (from lan1 to lan24). Another way (for defining switch nodes) would have to be either: - including a file where switch nodes are defined, which would need #defining lan interface names (and some other things), and #undefing them after the #include - defining a macro for switch nodes - have a separate DTBs for each possible configuration (this would result in too many DTBs) - not defining these nodes in device-tree at all, instead creating them in U-Boot when patching the device-tree (I actually tried this, but the resulting code in U-Boot was horrible) Please let me know if doing it this way is acceptable, or if I should try something different (and if yes, what?). Signed-off-by: Marek Behún Cc: Rob Herring Cc: linux-kernel@vger.kernel.org Cc: Gregory CLEMENT Cc: linux-arm-kernel@lists.infradead.org Cc: Andrew Lunn --- .../arm/marvell/armada-3720-turris-mox.txt | 6 + MAINTAINERS | 1 + arch/arm64/boot/dts/marvell/Makefile | 1 + .../dts/marvell/armada-3720-turris-mox.dts | 838 ++++++++++++++++++ 4 files changed, 846 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/marvell/armada-3720-turris-mox.txt create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-3720-turris-mox.txt b/Documentation/devicetree/bindings/arm/marvell/armada-3720-turris-mox.txt new file mode 100644 index 000000000000..408fc07a9bbf --- /dev/null +++ b/Documentation/devicetree/bindings/arm/marvell/armada-3720-turris-mox.txt @@ -0,0 +1,6 @@ +CZ.NIC's Turris Mox SOHO router Device Tree Bindings +---------------------------------------------------- + +Required root node property: + +compatible: must contain "cznic,turris-mox" diff --git a/MAINTAINERS b/MAINTAINERS index f6e60e7f6c11..81b57260b110 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1348,6 +1348,7 @@ ARM/CZ.NIC TURRIS MOX SUPPORT M: Marek Behun W: http://mox.turris.cz S: Maintained +F: arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts F: include/mfd/moxtet.h F: drivers/gpio/gpio-moxtet.c F: drivers/mfd/moxtet.c diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 5633676fa9d0..51782b31b441 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb # Mvebu SoC Family dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts new file mode 100644 index 000000000000..1315c59ecef3 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -0,0 +1,838 @@ +// SPDX-License-Identifier: GPL-2.0+ or X11 +/* + * Device Tree file for CZ.NIC Turris Mox Board + * 2018 by Marek Behun + */ + +/dts-v1/; + +#include +#include +#include "armada-372x.dtsi" + +/ { + model = "CZ.NIC Turris Mox Board"; + compatible = "cznic,turris-mox", "marvell,armada3720", + "marvell,armada3710"; + + aliases { + spi0 = &spi0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + red { + gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + reset_button { + label = "reset"; + linux,code = ; + gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + exp_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>; + }; + + usb3_phy: usb3-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&exp_usb3_vbus>; + }; + + vsdc_reg: vsdc_reg { + compatible = "regulator-gpio"; + regulator-name = "vsdc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; + + vsdio_reg: vsdio_reg { + compatible = "regulator-gpio"; + regulator-name = "vsdio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpiosb 22 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; + + sdhci1_pwrseq: sdhci1_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpionb 19 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + sfp: sfp { + compatible = "sff,sfp+"; + i2c-bus = <&i2c0>; + los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&moxtet_sfp 3 GPIO_ACTIVE_HIGH>; + rate-select0-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; +}; + +&pinctrl_nb { + spi_cs1_pins: spi-cs1-pins { + groups = "spi_cs1"; + function = "spi"; + }; + + sdio0_pins: sdio0-pins { + groups = "sdio0"; + function = "sdio"; + }; +}; + +&pinctrl_sb { + sdio_sb_pins: sdio-sb-pins { + groups = "sdio_sb"; + function = "sdio"; + }; + + smi_pins: smi-pins { + groups = "smi"; + function = "smi"; + }; + + pcie_pins: pcie1-pins { + groups = "pcie1"; + function = "gpio"; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + + rtc@6f { + compatible = "microchip,mcp7940x"; + reg = <0x6f>; + }; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + status = "okay"; + max-link-speed = <2>; + reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>; + + /* this shall be enabled by u-boot if the PCIe module is present */ + status = "disabled"; +}; + +&uart0 { + status = "okay"; +}; + +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii-id"; + phy = <&phy1>; + status = "okay"; +}; + +ð1 { + phy-mode = "1000base-x"; + managed = "in-band-status"; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&smi_pins>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + + switch0@10 { + compatible = "marvell,mv88e6190"; + reg = <0x10 0>; + dsa,member = <0 0>; + interrupt-parent = <&gpiosb>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1: switch0phy1@1 { + reg = <0x1>; + }; + + switch0phy2: switch0phy2@2 { + reg = <0x2>; + }; + + switch0phy3: switch0phy3@3 { + reg = <0x3>; + }; + + switch0phy4: switch0phy4@4 { + reg = <0x4>; + }; + + switch0phy5: switch0phy5@5 { + reg = <0x5>; + }; + + switch0phy6: switch0phy6@6 { + reg = <0x6>; + }; + + switch0phy7: switch0phy7@7 { + reg = <0x7>; + }; + + switch0phy8: switch0phy8@8 { + reg = <0x8>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan1"; + phy-handle = <&switch0phy1>; + }; + + port@2 { + reg = <0x2>; + label = "lan2"; + phy-handle = <&switch0phy2>; + }; + + port@3 { + reg = <0x3>; + label = "lan3"; + phy-handle = <&switch0phy3>; + }; + + port@4 { + reg = <0x4>; + label = "lan4"; + phy-handle = <&switch0phy4>; + }; + + port@5 { + reg = <0x5>; + label = "lan5"; + phy-handle = <&switch0phy5>; + }; + + port@6 { + reg = <0x6>; + label = "lan6"; + phy-handle = <&switch0phy6>; + }; + + port@7 { + reg = <0x7>; + label = "lan7"; + phy-handle = <&switch0phy7>; + }; + + port@8 { + reg = <0x8>; + label = "lan8"; + phy-handle = <&switch0phy8>; + }; + + port@9 { + reg = <0x9>; + label = "cpu"; + ethernet = <ð1>; + }; + + switch0port10: port@a { + reg = <0xa>; + label = "dsa"; + phy-mode = "2500base-x"; + link = <&switch1port9 &switch2port9>; + status = "disabled"; + }; + + port-sfp@a { + reg = <0xa>; + label = "sfp"; + sfp = <&sfp>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "disabled"; + }; + }; + }; + + switch0@2 { + compatible = "marvell,mv88e6085"; + reg = <0x2 0>; + dsa,member = <0 0>; + interrupt-parent = <&gpiosb>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1_topaz: switch0phy1@11 { + reg = <0x11>; + }; + + switch0phy2_topaz: switch0phy2@12 { + reg = <0x12>; + }; + + switch0phy3_topaz: switch0phy3@13 { + reg = <0x13>; + }; + + switch0phy4_topaz: switch0phy4@14 { + reg = <0x14>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan1"; + phy-handle = <&switch0phy1_topaz>; + }; + + port@2 { + reg = <0x2>; + label = "lan2"; + phy-handle = <&switch0phy2_topaz>; + }; + + port@3 { + reg = <0x3>; + label = "lan3"; + phy-handle = <&switch0phy3_topaz>; + }; + + port@4 { + reg = <0x4>; + label = "lan4"; + phy-handle = <&switch0phy4_topaz>; + }; + + port@5 { + reg = <0x5>; + label = "cpu"; + ethernet = <ð1>; + }; + }; + }; + + switch1@11 { + compatible = "marvell,mv88e6190"; + reg = <0x11 0>; + dsa,member = <0 1>; + interrupt-parent = <&gpiosb>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch1phy1: switch1phy1@1 { + reg = <0x1>; + }; + + switch1phy2: switch1phy2@2 { + reg = <0x2>; + }; + + switch1phy3: switch1phy3@3 { + reg = <0x3>; + }; + + switch1phy4: switch1phy4@4 { + reg = <0x4>; + }; + + switch1phy5: switch1phy5@5 { + reg = <0x5>; + }; + + switch1phy6: switch1phy6@6 { + reg = <0x6>; + }; + + switch1phy7: switch1phy7@7 { + reg = <0x7>; + }; + + switch1phy8: switch1phy8@8 { + reg = <0x8>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan9"; + phy-handle = <&switch1phy1>; + }; + + port@2 { + reg = <0x2>; + label = "lan10"; + phy-handle = <&switch1phy2>; + }; + + port@3 { + reg = <0x3>; + label = "lan11"; + phy-handle = <&switch1phy3>; + }; + + port@4 { + reg = <0x4>; + label = "lan12"; + phy-handle = <&switch1phy4>; + }; + + port@5 { + reg = <0x5>; + label = "lan13"; + phy-handle = <&switch1phy5>; + }; + + port@6 { + reg = <0x6>; + label = "lan14"; + phy-handle = <&switch1phy6>; + }; + + port@7 { + reg = <0x7>; + label = "lan15"; + phy-handle = <&switch1phy7>; + }; + + port@8 { + reg = <0x8>; + label = "lan16"; + phy-handle = <&switch1phy8>; + }; + + switch1port9: port@9 { + reg = <0x9>; + label = "dsa"; + phy-mode = "2500base-x"; + link = <&switch0port10>; + }; + + switch1port10: port@a { + reg = <0xa>; + label = "dsa"; + phy-mode = "2500base-x"; + link = <&switch2port9>; + status = "disabled"; + }; + + port-sfp@a { + reg = <0xa>; + label = "sfp"; + sfp = <&sfp>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "disabled"; + }; + }; + }; + + switch1@2 { + compatible = "marvell,mv88e6085"; + reg = <0x2 0>; + dsa,member = <0 1>; + interrupt-parent = <&gpiosb>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch1phy1_topaz: switch1phy1@11 { + reg = <0x11>; + }; + + switch1phy2_topaz: switch1phy2@12 { + reg = <0x12>; + }; + + switch1phy3_topaz: switch1phy3@13 { + reg = <0x13>; + }; + + switch1phy4_topaz: switch1phy4@14 { + reg = <0x14>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan9"; + phy-handle = <&switch1phy1_topaz>; + }; + + port@2 { + reg = <0x2>; + label = "lan10"; + phy-handle = <&switch1phy2_topaz>; + }; + + port@3 { + reg = <0x3>; + label = "lan11"; + phy-handle = <&switch1phy3_topaz>; + }; + + port@4 { + reg = <0x4>; + label = "lan12"; + phy-handle = <&switch1phy4_topaz>; + }; + + port@5 { + reg = <0x5>; + label = "dsa"; + phy-mode = "2500base-x"; + link = <&switch0port10>; + }; + }; + }; + + switch2@12 { + compatible = "marvell,mv88e6190"; + reg = <0x12 0>; + dsa,member = <0 2>; + interrupt-parent = <&gpiosb>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch2phy1: switch2phy1@1 { + reg = <0x1>; + }; + + switch2phy2: switch2phy2@2 { + reg = <0x2>; + }; + + switch2phy3: switch2phy3@3 { + reg = <0x3>; + }; + + switch2phy4: switch2phy4@4 { + reg = <0x4>; + }; + + switch2phy5: switch2phy5@5 { + reg = <0x5>; + }; + + switch2phy6: switch2phy6@6 { + reg = <0x6>; + }; + + switch2phy7: switch2phy7@7 { + reg = <0x7>; + }; + + switch2phy8: switch2phy8@8 { + reg = <0x8>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan17"; + phy-handle = <&switch2phy1>; + }; + + port@2 { + reg = <0x2>; + label = "lan18"; + phy-handle = <&switch2phy2>; + }; + + port@3 { + reg = <0x3>; + label = "lan19"; + phy-handle = <&switch2phy3>; + }; + + port@4 { + reg = <0x4>; + label = "lan20"; + phy-handle = <&switch2phy4>; + }; + + port@5 { + reg = <0x5>; + label = "lan21"; + phy-handle = <&switch2phy5>; + }; + + port@6 { + reg = <0x6>; + label = "lan22"; + phy-handle = <&switch2phy6>; + }; + + port@7 { + reg = <0x7>; + label = "lan23"; + phy-handle = <&switch2phy7>; + }; + + port@8 { + reg = <0x8>; + label = "lan24"; + phy-handle = <&switch2phy8>; + }; + + switch2port9: port@9 { + reg = <0x9>; + label = "dsa"; + phy-mode = "2500base-x"; + link = <&switch1port10 &switch0port10>; + }; + + port-sfp@a { + reg = <0xa>; + label = "sfp"; + sfp = <&sfp>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "disabled"; + }; + }; + }; + + switch2@2 { + compatible = "marvell,mv88e6085"; + reg = <0x2 0>; + dsa,member = <0 2>; + interrupt-parent = <&gpiosb>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch2phy1_topaz: switch2phy1@11 { + reg = <0x11>; + }; + + switch2phy2_topaz: switch2phy2@12 { + reg = <0x12>; + }; + + switch2phy3_topaz: switch2phy3@13 { + reg = <0x13>; + }; + + switch2phy4_topaz: switch2phy4@14 { + reg = <0x14>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan17"; + phy-handle = <&switch2phy1_topaz>; + }; + + port@2 { + reg = <0x2>; + label = "lan18"; + phy-handle = <&switch2phy2_topaz>; + }; + + port@3 { + reg = <0x3>; + label = "lan19"; + phy-handle = <&switch2phy3_topaz>; + }; + + port@4 { + reg = <0x4>; + label = "lan20"; + phy-handle = <&switch2phy4_topaz>; + }; + + port@5 { + reg = <0x5>; + label = "dsa"; + phy-mode = "2500base-x"; + link = <&switch1port10 &switch0port10>; + }; + }; + }; + +}; + +&sdhci0 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 10 GPIO_ACTIVE_HIGH>; + vqmmc-supply = <&vsdc_reg>; + marvell,pad-type = "sd"; + status = "okay"; +}; + +&sdhci1 { + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_pins &sdio_sb_pins>; + non-removable; + bus-width = <4>; + marvell,pad-type = "sd"; + vqmmc-supply = <&vsdio_reg>; + mmc-pwrseq = <&sdhci1_pwrseq>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins &spi_cs1_pins>; + assigned-clocks = <&nb_periph_clk 7>; + assigned-clock-parents = <&tbg 1>; + assigned-clock-rates = <20000000>; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + + partition@0 { + label = "secure-firmware"; + reg = <0x0 0x20000>; + }; + + partition@20000 { + label = "u-boot"; + reg = <0x20000 0x160000>; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x10000>; + }; + + partition@190000 { + label = "Rescue system"; + reg = <0x190000 0x660000>; + }; + + partition@7f0000 { + label = "dtb"; + reg = <0x7f0000 0x10000>; + }; + }; + + moxtet@1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cznic,moxtet"; + reg = <1>; + devrst-gpio = <&gpiosb 2 GPIO_ACTIVE_LOW>; + spi-max-frequency = <10000000>; + spi-cpol; + spi-cpha; + + moxtet_sfp: moxtet-sfp@0 { + compatible = "cznic,moxtet-gpio"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + moxtet,id = <1>; + moxtet,input-mask = <0x7>; + moxtet,output-mask = <0x3>; + status = "disabled"; + }; + }; +}; + +&usb2 { + status = "okay"; +}; + +&usb3 { + status = "okay"; + usb-phy = <&usb3_phy>; +};