mbox

[GIT,PULL,6/6,V2] Broadcom drivers changes for 4.14

Message ID 20170825005632.29599-1-f.fainelli@gmail.com
State New
Headers show

Pull-request

http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.14/drivers

Message

Florian Fainelli Aug. 25, 2017, 12:56 a.m. UTC 
The following changes since commit 5771a8c08880cdca3bfb4a3fc6d309d6bba20877:

  Linux v4.13-rc1 (2017-07-15 15:22:10 -0700)

are available in the git repository at:

  http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.14/drivers

for you to fetch changes up to ed70bd0aa574d4922382ead47cd370174e31cb0e:

  soc bcm: brcmstb: Add support for S2/S3/S5 suspend states (MIPS) (2017-08-24 17:49:43 -0700)

----------------------------------------------------------------
This pull request contains Broadcom ARM/ARM64 SoC drivers changes for 4.14,
please pull the following:

- Markus adds support for the Broadcom STB DDR PHY frontend which supports
  dynamic firmware loading and offers the ability to respond with DRAM refresh
  rates. He also adds a proper documentation binding document for that
  peripheral

- Brian adds support for S2/S3/S5 system suspend/resume modes on ARM-based SoCs
  which is not new but had been lingering for a long time.

- Justin adds S2/S3 system suspend/resume modes on MIPS-based SoCs which is a
  bit new newer and builds on top of the ARM-based support.

- Florian adds Device Tree binding documents for both ARM and MIPS based systems
  describing the necessary nodes for S2/S3/S5 on these SoCs.

----------------------------------------------------------------
Brian Norris (1):
      soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)

Florian Fainelli (2):
      dt-bindings: ARM: brcmstb: Update Broadcom STB Power Management binding
      dt-bindings: Document MIPS Broadcom STB power management nodes

Justin Chen (1):
      soc bcm: brcmstb: Add support for S2/S3/S5 suspend states (MIPS)

Markus Mayer (2):
      dt-bindings: Add bindings for Broadcom STB DRAM Sensors
      memory: brcmstb: Add driver for DPFE

 .../devicetree/bindings/arm/bcm/brcm,brcmstb.txt   |   6 +-
 .../bindings/memory-controllers/brcm,dpfe-cpu.txt  |  27 +
 .../devicetree/bindings/mips/brcm/soc.txt          | 153 ++++
 MAINTAINERS                                        |   8 +
 drivers/memory/Makefile                            |   1 +
 drivers/memory/brcmstb_dpfe.c                      | 701 ++++++++++++++++++
 drivers/soc/bcm/Kconfig                            |   2 +
 drivers/soc/bcm/brcmstb/Kconfig                    |   9 +
 drivers/soc/bcm/brcmstb/Makefile                   |   1 +
 drivers/soc/bcm/brcmstb/pm/Makefile                |   3 +
 drivers/soc/bcm/brcmstb/pm/aon_defs.h              | 113 +++
 drivers/soc/bcm/brcmstb/pm/pm-arm.c                | 822 +++++++++++++++++++++
 drivers/soc/bcm/brcmstb/pm/pm-mips.c               | 461 ++++++++++++
 drivers/soc/bcm/brcmstb/pm/pm.h                    |  89 +++
 drivers/soc/bcm/brcmstb/pm/s2-arm.S                |  76 ++
 drivers/soc/bcm/brcmstb/pm/s2-mips.S               | 200 +++++
 drivers/soc/bcm/brcmstb/pm/s3-mips.S               | 146 ++++
 17 files changed, 2817 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt
 create mode 100644 drivers/memory/brcmstb_dpfe.c
 create mode 100644 drivers/soc/bcm/brcmstb/Kconfig
 create mode 100644 drivers/soc/bcm/brcmstb/pm/Makefile
 create mode 100644 drivers/soc/bcm/brcmstb/pm/aon_defs.h
 create mode 100644 drivers/soc/bcm/brcmstb/pm/pm-arm.c
 create mode 100644 drivers/soc/bcm/brcmstb/pm/pm-mips.c
 create mode 100644 drivers/soc/bcm/brcmstb/pm/pm.h
 create mode 100644 drivers/soc/bcm/brcmstb/pm/s2-arm.S
 create mode 100644 drivers/soc/bcm/brcmstb/pm/s2-mips.S
 create mode 100644 drivers/soc/bcm/brcmstb/pm/s3-mips.S

Comments

Olof Johansson Sept. 6, 2017, 12:55 a.m. UTC | #1 
Hi,

On Thu, Aug 24, 2017 at 5:56 PM, Florian Fainelli <f.fainelli@gmail.com> wrote:
> The following changes since commit 5771a8c08880cdca3bfb4a3fc6d309d6bba20877:
>
>   Linux v4.13-rc1 (2017-07-15 15:22:10 -0700)
>
> are available in the git repository at:
>
>   http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.14/drivers
>
> for you to fetch changes up to ed70bd0aa574d4922382ead47cd370174e31cb0e:
>
>   soc bcm: brcmstb: Add support for S2/S3/S5 suspend states (MIPS) (2017-08-24 17:49:43 -0700)

Per discussion on IRC earlier today -- I had missed this updated pull
request. Since it's been sitting in -next for a while through your
tree, I've queued it up as next/late now and we'll try to get it
merged later in the merge window.


-Olof