| Message ID | 20170817183748.1450-3-f.fainelli@gmail.com |
|---|---|
| State | New |
| Headers | show |
On Thu, Aug 17, 2017 at 8:37 PM, Florian Fainelli <f.fainelli@gmail.com> wrote: > The following changes since commit 5771a8c08880cdca3bfb4a3fc6d309d6bba20877: > > Linux v4.13-rc1 (2017-07-15 15:22:10 -0700) > > are available in the git repository at: > > http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.14/devicetree > > for you to fetch changes up to 0173b2cd6948b5b96ac4e8dbc3bcb4dd0b45c296: > > ARM: BCM53573: Specify ports for USB LED for Tenda AC9 (2017-08-17 10:18:07 -0700) > > ---------------------------------------------------------------- > This pull request contains Broadcom ARM-based SoCs Device Tree changes for > 4.14, please pull the following: > > - Eric moves the bcm2837 DT file from arm64 to arm because it created a maintenance > problem and would have required either duplication or cross merges > > - Stefan changes how the pinmuxing is defined and pushes it at the board level > to support Raspberry Pi Zero Wireless. He then adds supports for the actual > Raspberry Pi Zero Wireless board along with binding documentation. Stefan > also defines a proper SMP enable-method property and binding for BCM2836 > (Raspbery Pi 2) > > - Rafal describes the BCM5301X USB ports correctly in Device Tree such that > it becomes possible to assign them to specific LED triggers (e.g: USB activity). > He does the same thing for BCM53573 and defines default LED triggers for USB. > > - Jon provides a fix for Northstar Plus which consists in correctly defining > the "dma-coherent" property for peripherals which are DMA coherent. He also > does a bit of re-arrangement of the USB DT nodes and finally adds USB 3 PHY > and host controller support for NorthStar Plus > > - Florian adds support for Broadcom's BCM947189ACDBMR reference board which is > based on BCM47182/53573 and which supports external MoCA (BCM6802) > > - Ray fixes the wrong UART2 base address for Cygnus > > - Scott moves the v3d node in the proper unit address order and defines the correct > UART alias for the BCM91130_entphn reference board to be UART3 > > - Jason adds the DT node for the Cygnus Cortex-A9 Performance Monitoring Unit > > - Jonathan adds a bunch of additional peripherals to the Cygnus DTS include file: > SDHCI, Keypad, SPI, DMA and pinmux configurations > > - Raveendra adds the Cygnus OHCI and EHCI Device Tree nodes Pulled into next/dt, thanks! Arnd
The following changes since commit 5771a8c08880cdca3bfb4a3fc6d309d6bba20877: Linux v4.13-rc1 (2017-07-15 15:22:10 -0700) are available in the git repository at: http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.14/devicetree for you to fetch changes up to 0173b2cd6948b5b96ac4e8dbc3bcb4dd0b45c296: ARM: BCM53573: Specify ports for USB LED for Tenda AC9 (2017-08-17 10:18:07 -0700) ---------------------------------------------------------------- This pull request contains Broadcom ARM-based SoCs Device Tree changes for 4.14, please pull the following: - Eric moves the bcm2837 DT file from arm64 to arm because it created a maintenance problem and would have required either duplication or cross merges - Stefan changes how the pinmuxing is defined and pushes it at the board level to support Raspberry Pi Zero Wireless. He then adds supports for the actual Raspberry Pi Zero Wireless board along with binding documentation. Stefan also defines a proper SMP enable-method property and binding for BCM2836 (Raspbery Pi 2) - Rafal describes the BCM5301X USB ports correctly in Device Tree such that it becomes possible to assign them to specific LED triggers (e.g: USB activity). He does the same thing for BCM53573 and defines default LED triggers for USB. - Jon provides a fix for Northstar Plus which consists in correctly defining the "dma-coherent" property for peripherals which are DMA coherent. He also does a bit of re-arrangement of the USB DT nodes and finally adds USB 3 PHY and host controller support for NorthStar Plus - Florian adds support for Broadcom's BCM947189ACDBMR reference board which is based on BCM47182/53573 and which supports external MoCA (BCM6802) - Ray fixes the wrong UART2 base address for Cygnus - Scott moves the v3d node in the proper unit address order and defines the correct UART alias for the BCM91130_entphn reference board to be UART3 - Jason adds the DT node for the Cygnus Cortex-A9 Performance Monitoring Unit - Jonathan adds a bunch of additional peripherals to the Cygnus DTS include file: SDHCI, Keypad, SPI, DMA and pinmux configurations - Raveendra adds the Cygnus OHCI and EHCI Device Tree nodes ---------------------------------------------------------------- Eric Anholt (1): ARM: dts: bcm283x: Move the BCM2837 DT contents from arm64 to arm. Florian Fainelli (3): ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support Merge tag 'bcm2835-dt-next-2017-08-07' into devicetree/next Merge tag 'bcm2835-dt-next-2017-08-15' into devicetree/next Jason Uy (1): ARM: dts: cygnus: Enable Performance Monitoring Unit Jon Mason (3): ARM: dts: NSP: Add dma-coherent to relevant DT entries ARM: dts: NSP: Rearrage USB entries ARM: dts: NSP: Add USB3 and USB3 PHY to NSP Jonathan Richardson (1): ARM: dts: cygnus: Add additional peripherals to dtsi Rafał Miłecki (3): ARM: dts: BCM5301X: Specify USB ports for each controller ARM: dts: BCM5301X: Specify USB ports for USB LEDs of few devices ARM: BCM53573: Specify ports for USB LED for Tenda AC9 Raveendra Padasalagi (1): ARM: dts: cygnus: Add generic-ehci/ohci nodes Ray Jui (1): ARM: dts: cygnus: Fix incorrect UART2 register base Scott Branden (2): ARM: dts: cygnus: place v3d in proper address ordered location ARM: dts: cygnus: add serial0 alias for uart3 on bcm91130_entphn Stefan Wahren (5): ARM: bcm283x: Define UART pinmuxing on board level dt-bindings: bcm: Add Raspberry Pi Zero W ARM: dts: bcm2835: Add Raspberry Pi Zero W dt-bindings: arm: add SMP enable-method for BCM2836 ARM: dts: bcm283x: Add 32-bit enable method for SMP .../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 4 + Documentation/devicetree/bindings/arm/cpus.txt | 1 + arch/arm/boot/dts/Makefile | 6 +- arch/arm/boot/dts/bcm-cygnus.dtsi | 149 +++++++++++++++++++-- arch/arm/boot/dts/bcm-nsp.dtsi | 59 ++++++-- arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 6 + arch/arm/boot/dts/bcm2835-rpi-a.dts | 6 + arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 6 + arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 6 + arch/arm/boot/dts/bcm2835-rpi-b.dts | 6 + arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 139 +++++++++++++++++++ arch/arm/boot/dts/bcm2835-rpi-zero.dts | 6 + arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 +- arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 6 + arch/arm/boot/dts/bcm2836.dtsi | 1 + arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 52 ++++++- .../dts/broadcom => arm/boot/dts}/bcm2837.dtsi | 1 + arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 + arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 + arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 6 + arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 + arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 5 + arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 3 + arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 3 + arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 2 + arch/arm/boot/dts/bcm5301x.dtsi | 34 +++++ arch/arm/boot/dts/bcm53573.dtsi | 4 + arch/arm/boot/dts/bcm911360_entphn.dts | 7 +- arch/arm/boot/dts/bcm947189acdbmr.dts | 97 ++++++++++++++ arch/arm/boot/dts/bcm958522er.dts | 8 ++ arch/arm/boot/dts/bcm958525er.dts | 8 ++ arch/arm/boot/dts/bcm958525xmc.dts | 8 ++ arch/arm/boot/dts/bcm958622hr.dts | 8 ++ arch/arm/boot/dts/bcm958623hr.dts | 8 ++ arch/arm/boot/dts/bcm958625hr.dts | 8 ++ arch/arm/boot/dts/bcm958625k.dts | 8 ++ arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi | 1 - arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 42 +----- .../boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi | 1 - .../boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi | 1 - arch/arm64/boot/dts/broadcom/bcm283x.dtsi | 1 - 41 files changed, 651 insertions(+), 79 deletions(-) create mode 100644 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts rename arch/{arm64/boot/dts/broadcom => arm/boot/dts}/bcm2837.dtsi (96%) create mode 100644 arch/arm/boot/dts/bcm947189acdbmr.dts delete mode 120000 arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi delete mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi delete mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi delete mode 120000 arch/arm64/boot/dts/broadcom/bcm283x.dtsi