| Message ID | 20170613201044.9808-3-f.fainelli@gmail.com |
|---|---|
| State | New |
| Headers | show |
On 06/13/2017 01:10 PM, Florian Fainelli wrote: > The following changes since commit 2ea659a9ef488125eb46da6eb571de5eae5c43f6: > > Linux 4.12-rc1 (2017-05-13 13:19:49 -0700) > > are available in the git repository at: > > http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.13/devicetree-arm64 > > for you to fetch changes up to 39b1aae758de6f933f8b45698b56221f6e817dc9: > > Merge tag 'bcm2835-dt-64-next-2017-06-08' into devicetree-arm64/next (2017-06-13 12:39:57 -0700) > > ---------------------------------------------------------------- > This pull request contains Broadcom ARM64-based SoCs Device Tree changes for > 4.13. Please note the following from Eric: > > I've based this summary on the bcm2835-dt-next tag, to clarify what's in this > patch series, but it does require being careful since it involves a cross-merge > between branches. > > - Anup documents the Broadcom Stingray binding, common clocks, adds initial > support for the Stingray DTSI and DTS files and adds support for the PL022, > PL330 and SP805 > > - Sandeep adds the clock nodes to the Stingray Device Tree nodes > > - Pramod adds support for the NAND, pinctrl, GPIO to the Stingray Device Tree nodes > > - Oza adds I2C Device Tree nodes to the Stingray DTSes > > - Srinath adds PWM and SDHCI Device Tree nodes for the Stingray SoC > > - Ravijeta adds support for the USB Dual Role PHY on Northstar 2 > > - Gerd starts adding references to the sdhost and sdhci controllers, and then > switches the sdcard to to use the SDHOST (faster than SDHCI) > > - Stefan defines the BCM2837 thermal coefficients in order for the Raspberry Pi > thermal driver to work correctly > > ---------------------------------------------------------------- And here: https://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git/log/?h=brcm/dt64
The following changes since commit 2ea659a9ef488125eb46da6eb571de5eae5c43f6: Linux 4.12-rc1 (2017-05-13 13:19:49 -0700) are available in the git repository at: http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.13/devicetree-arm64 for you to fetch changes up to 39b1aae758de6f933f8b45698b56221f6e817dc9: Merge tag 'bcm2835-dt-64-next-2017-06-08' into devicetree-arm64/next (2017-06-13 12:39:57 -0700) ---------------------------------------------------------------- This pull request contains Broadcom ARM64-based SoCs Device Tree changes for 4.13. Please note the following from Eric: I've based this summary on the bcm2835-dt-next tag, to clarify what's in this patch series, but it does require being careful since it involves a cross-merge between branches. - Anup documents the Broadcom Stingray binding, common clocks, adds initial support for the Stingray DTSI and DTS files and adds support for the PL022, PL330 and SP805 - Sandeep adds the clock nodes to the Stingray Device Tree nodes - Pramod adds support for the NAND, pinctrl, GPIO to the Stingray Device Tree nodes - Oza adds I2C Device Tree nodes to the Stingray DTSes - Srinath adds PWM and SDHCI Device Tree nodes for the Stingray SoC - Ravijeta adds support for the USB Dual Role PHY on Northstar 2 - Gerd starts adding references to the sdhost and sdhci controllers, and then switches the sdcard to to use the SDHOST (faster than SDHCI) - Stefan defines the BCM2837 thermal coefficients in order for the Raspberry Pi thermal driver to work correctly ---------------------------------------------------------------- Anup Patel (3): dt-bindings: bcm: Add Broadcom Stingray bindings document arm64: dts: Initial DTS files for Broadcom Stingray SOC arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray Baruch Siach (4): ARM: dts: bcm2835: fix uart0 pinctrl node names ARM: dts: bcm2835: fix i2c0 pins ARM: dts: bcm2835: fix uart0/uart1 pins ARM: dts: bcm2835: add index to the ethernet alias Eric Anholt (2): ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6) Merge tag 'bcm2835-dt-next-2017-06-08' into bcm2835-dt-64-next Florian Fainelli (2): Merge tag 'bcm2835-dt-next-2017-03-30' into devicetree/next Merge tag 'bcm2835-dt-64-next-2017-06-08' into devicetree-arm64/next Gerd Hoffmann (2): arm64: dts: bcm2837: add &sdhci and &sdhost ARM: dts: bcm283x: switch from &sdhci to &sdhost Oza Pawandeep (1): arm64: dts: Add I2C DT nodes for Stingray SoC Pramod Kumar (3): arm64: dts: Add NAND DT nodes for Stingray SOC arm64: dts: Add pinctrl DT nodes for Stingray SOC arm64: dts: Add GPIO DT nodes for Stingray SOC Raviteja Garimella (1): arm64: dts: NS2: Add USB DRD PHY device tree node Sandeep Tripathy (2): dt-bindings: clk: Extend binding doc for Stingray SOC arm64: dts: Add clock DT nodes for Stingray SOC Srinath Mannam (1): arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC Stefan Wahren (2): ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point ARM64: dts: bcm2837: Define CPU thermal coefficients .../devicetree/bindings/arm/bcm/brcm,stingray.txt | 12 + .../bindings/clock/brcm,iproc-clocks.txt | 76 ++++ arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 +- arch/arm/boot/dts/bcm2835.dtsi | 4 + arch/arm/boot/dts/bcm2836.dtsi | 4 + arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 1 + arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi | 2 +- arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi | 2 +- arch/arm/boot/dts/bcm283x.dtsi | 43 +- arch/arm64/boot/dts/broadcom/Makefile | 1 + arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 17 + arch/arm64/boot/dts/broadcom/bcm2837.dtsi | 4 + arch/arm64/boot/dts/broadcom/ns2.dtsi | 14 + arch/arm64/boot/dts/broadcom/stingray/Makefile | 6 + .../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 131 ++++++ .../boot/dts/broadcom/stingray/bcm958742k.dts | 78 ++++ .../boot/dts/broadcom/stingray/bcm958742t.dts | 40 ++ .../boot/dts/broadcom/stingray/stingray-clock.dtsi | 170 ++++++++ .../dts/broadcom/stingray/stingray-pinctrl.dtsi | 345 ++++++++++++++++ .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 460 +++++++++++++++++++++ include/dt-bindings/clock/bcm-sr.h | 101 +++++ .../dt-bindings/pinctrl/brcm,pinctrl-stingray.h | 68 +++ 23 files changed, 1570 insertions(+), 12 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b.dts create mode 100644 arch/arm64/boot/dts/broadcom/stingray/Makefile create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi create mode 100644 include/dt-bindings/clock/bcm-sr.h create mode 100644 include/dt-bindings/pinctrl/brcm,pinctrl-stingray.h