| Message ID | 20170119012553.2844-1-f.fainelli@gmail.com |
|---|---|
| State | New |
| Headers | show |
On Wed, Jan 18, 2017 at 05:25:53PM -0800, Florian Fainelli wrote: > The following changes since commit 7ce7d89f48834cefece7804d38fc5d85382edf77: > > Linux 4.10-rc1 (2016-12-25 16:13:08 -0800) > > are available in the git repository at: > > http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.11/devicetree > > for you to fetch changes up to c5a8e3add28ca4063410353acfbe6e650174e432: > > Merge tag 'bcm2835-dt-next-2017-01-17' into devicetree/next (2017-01-18 17:20:32 -0800) > > ---------------------------------------------------------------- > This pull request contains Broadcom ARM-based SoC Device Tree changes for 4.11, > please pull the following changes: > > - Rafal enables the UART by default on all BCM5301x, BCM4708, BCM4709 since > every device found out there has it enabled by default. He also fixes the > LED definitions for the Luxul XWR-3100 device, enables USB controllers and > their respective PHY devices, specifies the correct GPIO to power on USB > HUBs, adds the additional RAM bank for somes devices, and finally sets the > correct 5Ghz frequency limits on the Netgear R8000 > > - Jon does a number of Norsthar Plus SoC cleanups, fixes NAND partitions unit > addresses, adds QSPI support to a bunch of boards, adds Ethernet switch ports > to the BCM958625K reference board, enables 3rd Ethernet MAC instance to > relevant DTSes, enables Ethernet on the XMC board, and finally adds SD/MMC > support to the XMC board > > - Boris adds the Video Encoder nodes to the Raspberry Pi DTS include files > ands enables it on the relevant boards > > - Dan adds support for two new Luxul devices: XAP-1410 and XWR-1200, both > BCM47081 based SoCs Merged, thanks! -Olof
The following changes since commit 7ce7d89f48834cefece7804d38fc5d85382edf77: Linux 4.10-rc1 (2016-12-25 16:13:08 -0800) are available in the git repository at: http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.11/devicetree for you to fetch changes up to c5a8e3add28ca4063410353acfbe6e650174e432: Merge tag 'bcm2835-dt-next-2017-01-17' into devicetree/next (2017-01-18 17:20:32 -0800) ---------------------------------------------------------------- This pull request contains Broadcom ARM-based SoC Device Tree changes for 4.11, please pull the following changes: - Rafal enables the UART by default on all BCM5301x, BCM4708, BCM4709 since every device found out there has it enabled by default. He also fixes the LED definitions for the Luxul XWR-3100 device, enables USB controllers and their respective PHY devices, specifies the correct GPIO to power on USB HUBs, adds the additional RAM bank for somes devices, and finally sets the correct 5Ghz frequency limits on the Netgear R8000 - Jon does a number of Norsthar Plus SoC cleanups, fixes NAND partitions unit addresses, adds QSPI support to a bunch of boards, adds Ethernet switch ports to the BCM958625K reference board, enables 3rd Ethernet MAC instance to relevant DTSes, enables Ethernet on the XMC board, and finally adds SD/MMC support to the XMC board - Boris adds the Video Encoder nodes to the Raspberry Pi DTS include files ands enables it on the relevant boards - Dan adds support for two new Luxul devices: XAP-1410 and XWR-1200, both BCM47081 based SoCs ---------------------------------------------------------------- Boris Brezillon (2): ARM: dts: bcm283x: Add VEC node in bcm283x.dtsi ARM: dts: bcm283x: Enable the VEC IP on all RaspberryPi boards Dan Haab (2): ARM: dts: BCM5301X: Add DT for Luxul XAP-1410 ARM: dts: BCM5301X: Add DT for Luxul XWR-1200 Florian Fainelli (1): Merge tag 'bcm2835-dt-next-2017-01-17' into devicetree/next Jon Mason (7): ARM: dts: NSP: DT Clean-ups ARM: dts: NSP: Correct NAND partition unit address ARM: dts: NSP: Add QSPI support to missing boards ARM: dts: NSP: Add BCM958625K switch ports ARM: dts: NSP: Add and enable amac2 ARM: dts: NSP: Add Ethernet to NSP XMC ARM: dts: NSP: Add SD/MMC support Rafał Miłecki (7): ARM: dts: BCM5301X: Enable UART by default for BCM4708(1), BCM4709(4) & BCM53012 ARM: dts: BCM5301X: Fix LAN LED labels for Luxul XWR-3100 ARM: dts: BCM5301X: Specify USB controllers in DT ARM: dts: BCM5301X: Set GPIO enabling USB power on Netgear R7000 ARM: dts: BCM5301X: Specify all RAM by including an extra block ARM: dts: BCM53573: Specify USB ports of on-SoC controllers ARM: dts: BCM5301X: Set 5 GHz wireless frequency limits on Netgear R8000 arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/bcm-nsp.dtsi | 64 +++++---- arch/arm/boot/dts/bcm2835-rpi.dtsi | 5 + arch/arm/boot/dts/bcm283x.dtsi | 8 ++ arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 3 +- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 3 +- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 7 +- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 4 - arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 4 - arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 7 +- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 3 +- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 7 +- arch/arm/boot/dts/bcm4708.dtsi | 4 + arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 3 +- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 7 +- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 3 +- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 60 ++++++++ arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 107 +++++++++++++++ arch/arm/boot/dts/bcm47081.dtsi | 4 + arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 3 +- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 3 +- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 11 +- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 51 ++++++- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 4 - arch/arm/boot/dts/bcm4709.dtsi | 1 + arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 7 +- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 13 +- arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 7 +- arch/arm/boot/dts/bcm47094.dtsi | 1 + arch/arm/boot/dts/bcm5301x.dtsi | 41 +++++- arch/arm/boot/dts/bcm53573.dtsi | 22 +++ arch/arm/boot/dts/bcm94708.dts | 4 - arch/arm/boot/dts/bcm94709.dts | 4 - arch/arm/boot/dts/bcm953012er.dts | 4 - arch/arm/boot/dts/bcm953012k.dts | 1 - arch/arm/boot/dts/bcm958522er.dts | 35 ++++- arch/arm/boot/dts/bcm958525er.dts | 35 ++++- arch/arm/boot/dts/bcm958525xmc.dts | 68 ++++++++-- arch/arm/boot/dts/bcm958622hr.dts | 42 ++++++ arch/arm/boot/dts/bcm958623hr.dts | 58 ++++++-- arch/arm/boot/dts/bcm958625hr.dts | 72 ++++++++-- arch/arm/boot/dts/bcm958625k.dts | 151 ++++++++++++++++----- arch/arm/boot/dts/bcm988312hr.dts | 42 ++++++ 43 files changed, 813 insertions(+), 172 deletions(-) create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts