Message ID | 20160824110006.1866-2-nsekhar@ti.com |
---|---|
State | New |
Headers | show |
On Wednesday, August 24, 2016 4:30:05 PM CEST Sekhar Nori wrote: > DaVinci DA850 device-tree enhancements include: > > - Support for new board OMAP-L138 LCDK > - Add AEMIF node on DA850 EVM and use it for NAND > - Audio support for LCDK > - Cleanups for PWM and UART > > This one fails to build: ERROR (phandle_references): Reference to non-existent node or label "nand_cs3_pins" ERROR: Input tree has errors, aborting (use -f to force output) DTC arch/arm/boot/dts/bcm47081-asus-rt-n18u.dtb Can you send a fixed version please? Arnd
Hi Arnd, On Wednesday 14 September 2016 09:23 PM, Arnd Bergmann wrote: > On Wednesday, August 24, 2016 4:30:05 PM CEST Sekhar Nori wrote: >> DaVinci DA850 device-tree enhancements include: >> >> - Support for new board OMAP-L138 LCDK >> - Add AEMIF node on DA850 EVM and use it for NAND >> - Audio support for LCDK >> - Cleanups for PWM and UART >> >> > > This one fails to build: > > > ERROR (phandle_references): Reference to non-existent node or label "nand_cs3_pins" > > ERROR: Input tree has errors, aborting (use -f to force output) > DTC arch/arm/boot/dts/bcm47081-asus-rt-n18u.dtb > > > Can you send a fixed version please? Did the merge happen cleanly? There should be no nand_cs3_pins if the merge was clean. It should be removed with 31e3a8817b66 ("ARM: dts: da850,da850-evm: Add an aemif node and use it for the NAND"). If the merge was clean, can you please push the offending tree to some place I can fetch and take a look. I dont have "nand_cs3_pins" in my tree anymore nor I can reproduce the build break. Thanks, Sekhar
On Thursday, September 15, 2016 2:11:03 PM CEST Sekhar Nori wrote: > On Wednesday 14 September 2016 09:23 PM, Arnd Bergmann wrote: > > On Wednesday, August 24, 2016 4:30:05 PM CEST Sekhar Nori wrote: > > Can you send a fixed version please? > > Did the merge happen cleanly? There should be no nand_cs3_pins if the > merge was clean. It should be removed with 31e3a8817b66 ("ARM: dts: > da850,da850-evm: Add an aemif node and use it for the NAND"). > > If the merge was clean, can you please push the offending tree to some > place I can fetch and take a look. I dont have "nand_cs3_pins" in my > tree anymore nor I can reproduce the build break. > > I must have made a mistake, it now all works, sorry for the confusion. I don't have the error in my scrollback buffer any more, but I suspect that the file that caused the problem was not actually the .dts file but the .dts.orig file from resolving the conflict. Pulled it into next/dt now. Arnd