| Message ID | 20160222215612.GV13417@atomide.com |
|---|---|
| State | New |
| Headers | show |
* Arnd Bergmann <arnd@arndb.de> [160226 13:35]: > On Monday 22 February 2016 13:56:12 Tony Lindgren wrote: > > Device tree changes for omaps for v4.6 merge window. Mostly just > > adding board specific devices and few new boards: > > Pulled into next/dt, with a trivial conflict resolution: > > --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi > +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi > @@@ -110,6 -110,19 +110,11 @@@ > > &i2c3 { > clock-frequency = <400000>; > -}; > - > -&i2c2 { > - clock-frequency = <400000>; > -}; > - > -&i2c3 { > - clock-frequency = <400000>; > + at24@50 { > + compatible = "at24,24c02"; > + readonly; > + reg = <0x50>; > + }; > }; > > /* OK looks god to me thanks. Tony
The following changes since commit 92e963f50fc74041b5e9e744c330dca48e04f08d: Linux 4.5-rc1 (2016-01-24 13:06:47 -0800) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.6/dt-pt1 for you to fetch changes up to b9d3ec1d98c658226606e66e55c940491447e617: ARM: dts: am57xx-beagle-x15: Add eeprom information (2016-02-22 11:18:40 -0800) ---------------------------------------------------------------- Device tree changes for omaps for v4.6 merge window. Mostly just adding board specific devices and few new boards: - N900 improvments for adp1653 and gpio keys - Add missing bandgap data for omap3 - Add more devices for compulab cm-t335 - Add n950 WLAN support, enable modem, add pinctrl for SSI - Correct dm814x and dra62x auxclk rate, add support for GPMC and NAND - Add syscon node for PHY's on dra7 - Add support more devices on logicpd torpedo - Add USB host support for igep and specify boot console - Fix audio clock for am335x-sl50 and specify boot console - Remove deprecated tx-fifo-resize for dwc3 that was only used on omap5 es1.0 - Add dra7 thermal data - Update am43x-epos-evm compatible string to am438 - Add support for logicpd dm3730 som-lv ---------------------------------------------------------------- Adam Ford (8): ARM: dts: LogicPD Torpedo: Add MT9P031 Support ARM: dts: LogicPD Torpedo: Add AT24 EEPROM Support ARM: dts: LogicPD Torpedo: Fix Panel Sleep ARM: dts: LogicPD Torpedo: Add SPI EEPROM ARM: dts: LogicPD Torpedo: Set HSUSB0 Pin Mux ARM: dts: omap3logic: Add PWM-Backlight ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV ARM: dts: Add HSUSB2 EHCI Support to Logic PD DM37xx SOM-LV Enric Balletbo i Serra (3): ARM: dts: igep00x0: Specify the device to be used for boot console output. ARM: dts: am335x-sl50: Specify the device to be used for boot console output. ARM: dts: am335x-sl50: Fix audio codec setup. Felipe Balbi (1): ARM: dts: remove deprecated property dwc3 Ivaylo Dimitrov (1): ARM: dts: omap3-n900: Allow gpio keys to be disabled Keerthy (4): ARM: dts: DRA7: Add DSPEVE thermal data ARM: dts: DRA7: Add IVA thermal data ARM: dts: DRA7: Add missing IVA and DSPEVE thermal domain data ARM: dts: am43x-epos-evm: Add the am438 compatible string Kishon Vijay Abraham I (4): ARM: dts: dra7: Add dt node for the sycon pcie ARM: dts: dra7: Use "syscon-phy-power" and "syscon-pcs" in PCIe PHY node ARM: dts: dra7: Use "ti,dra7x-usb2-phy2" compatible string for USB2 PHY2 ARM: dts: am4372/dra7/omap5: Use "syscon-phy-power" instead of "ctrl-module" Nishanth Menon (1): ARM: dts: am57xx-beagle-x15: Add eeprom information Pali Rohár (3): ARM: dts: n900: Include adp1653 device ARM: dts: omap3: Include missing bandgap data for ti-soc-thermal driver ARM: dts: n900: Use linux input defines instead hardcoded constants Pau Pajuel (1): ARM: dts: omap3-igep0030-common: Add USB Host support Sebastian Reichel (4): ARM: dts: N950: Add wlan support ARM: dts: OMAP3-N950-N9: Enable SSI module ARM: dts: OMAP3-N950-N9: Enable modem ARM: dts: OMAP3-N950-N9: Add ssi idle pinctrl state Tony Lindgren (5): ARM: dts: The rate for auxclk is 22.59792 by default ARM: dts: Add support for GPMC for dm814x and dra62x ARM: dts: Add NAND support for j5-eco evm ARM: dts: Add NAND support for dm8148-evm Merge branch 'n900-keys' into omap-for-v4.6/dt Uri Mashiach (4): ARM: dts: cm-t335: Add support for CAN bus ARM: dts: cm-t335: add touchscreen support ARM: dts: cm-t335: add audio support ARM: dts: add spi wifi support to cm-t335 .../devicetree/bindings/arm/omap/omap.txt | 2 +- arch/arm/boot/dts/am335x-cm-t335.dts | 171 +++++++++++++ arch/arm/boot/dts/am335x-sl50.dts | 24 +- arch/arm/boot/dts/am4372.dtsi | 16 +- arch/arm/boot/dts/am43x-epos-evm.dts | 2 +- arch/arm/boot/dts/am57xx-beagle-x15.dts | 5 + arch/arm/boot/dts/dm8148-evm.dts | 56 +++++ arch/arm/boot/dts/dm814x-clocks.dtsi | 4 +- arch/arm/boot/dts/dm814x.dtsi | 12 + arch/arm/boot/dts/dra62x-j5eco-evm.dts | 56 +++++ arch/arm/boot/dts/dra7-dspeve-thermal.dtsi | 27 +++ arch/arm/boot/dts/dra7-iva-thermal.dtsi | 27 +++ arch/arm/boot/dts/dra7.dtsi | 80 ++---- arch/arm/boot/dts/dra74x.dtsi | 1 - arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts | 268 +++++++++++++++++++++ arch/arm/boot/dts/logicpd-som-lv.dtsi | 265 ++++++++++++++++++++ arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts | 163 ++++++++++--- arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 35 +++ arch/arm/boot/dts/omap3-igep.dtsi | 4 + arch/arm/boot/dts/omap3-igep0030-common.dtsi | 41 ++++ arch/arm/boot/dts/omap3-n9.dts | 4 + arch/arm/boot/dts/omap3-n900.dts | 44 ++-- arch/arm/boot/dts/omap3-n950-n9.dtsi | 93 +++++++ arch/arm/boot/dts/omap3-n950.dts | 33 +++ arch/arm/boot/dts/omap34xx.dtsi | 6 + arch/arm/boot/dts/omap36xx.dtsi | 6 + arch/arm/boot/dts/omap5.dtsi | 27 +-- 27 files changed, 1324 insertions(+), 148 deletions(-) create mode 100644 arch/arm/boot/dts/dra7-dspeve-thermal.dtsi create mode 100644 arch/arm/boot/dts/dra7-iva-thermal.dtsi create mode 100644 arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts create mode 100644 arch/arm/boot/dts/logicpd-som-lv.dtsi