@@ -28,7 +28,6 @@ config ARCH_OMAP4
select ARM_CPU_SUSPEND if PM
select ARM_ERRATA_720789
select ARM_GIC
- select CACHE_L2X0
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select OMAP_INTERCONNECT
May look as if it's the right thing to do, but there's symbols lower down
(PL310_ERRATA_*) which are selected which depend on this symbol being
enabled.
What this means is that it's now possible for OMAP to be configured with
CACHE_L2X0 disabled _and_ for the PL310_ERRATA_* options to be forced on,
which results in:
warning: (SOC_IMX6 && SOC_VF610 && ARCH_OMAP4) selects PL310_ERRATA_588369 which has unmet direct dependencies (CACHE_L2X0)
warning: (SOC_IMX6 && SOC_VF610 && ARCH_OMAP4) selects PL310_ERRATA_727915 which has unmet direct dependencies (CACHE_L2X0)
So, let's clean up this sillyness by doing the job properly - ensuring
that /all/ PL310_ERRATA_* symbols are selected conditionally on
CACHE_L2X0 (whether or not CACHE_L2X0 is selected), so when people remove
that select statement, it doesn't cause these kinds of side effects.
The patch below will be in linux-next tomorrow.
From: Russell King <rmk+kernel@arm.linux.org.uk>
Subject: [PATCH] ARM: l2c: fix dependencies on PL310 errata symbols
A number of configurations spit out warnings similar to:
warning: (SOC_IMX6 && SOC_VF610 && ARCH_OMAP4) selects PL310_ERRATA_588369 which has unmet direct dependencies (CACHE_L2X0)
warning: (SOC_IMX6 && SOC_VF610 && ARCH_OMAP4) selects PL310_ERRATA_727915 which has unmet direct dependencies (CACHE_L2X0)
Clean up the dependencies here:
* PL310 symbols should only be selected when CACHE_L2X0 is enabled.
* Since the cache-l2x0 code detects PL310 presence at runtime, and we will
eventually get rid of CACHE_PL310, surround these errata options with an
if CACHE_L2X0 conditional rather than repeating the dependency against
each.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/mach-imx/Kconfig | 12 ++++++------
arch/arm/mach-omap2/Kconfig | 4 ++--
arch/arm/mach-sti/Kconfig | 4 ++--
arch/arm/mach-ux500/Kconfig | 2 +-
arch/arm/mach-vexpress/Kconfig | 2 +-
arch/arm/mm/Kconfig | 9 ++++-----
6 files changed, 16 insertions(+), 17 deletions(-)
@@ -738,9 +738,9 @@ config SOC_IMX6
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select MFD_SYSCON
- select PL310_ERRATA_588369 if CACHE_PL310
- select PL310_ERRATA_727915 if CACHE_PL310
- select PL310_ERRATA_769419 if CACHE_PL310
+ select PL310_ERRATA_588369 if CACHE_L2X0
+ select PL310_ERRATA_727915 if CACHE_L2X0
+ select PL310_ERRATA_769419 if CACHE_L2X0
config SOC_IMX6Q
bool "i.MX6 Quad/DualLite support"
@@ -775,9 +775,9 @@ config SOC_VF610
select ARM_GIC
select PINCTRL_VF610
select VF_PIT_TIMER
- select PL310_ERRATA_588369 if CACHE_PL310
- select PL310_ERRATA_727915 if CACHE_PL310
- select PL310_ERRATA_769419 if CACHE_PL310
+ select PL310_ERRATA_588369 if CACHE_L2X0
+ select PL310_ERRATA_727915 if CACHE_L2X0
+ select PL310_ERRATA_769419 if CACHE_L2X0
help
This enable support for Freescale Vybrid VF610 processor.
@@ -32,8 +32,8 @@ config ARCH_OMAP4
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select OMAP_INTERCONNECT
- select PL310_ERRATA_588369
- select PL310_ERRATA_727915
+ select PL310_ERRATA_588369 if CACHE_L2X0
+ select PL310_ERRATA_727915 if CACHE_L2X0
select PM_OPP if PM
select PM_RUNTIME if CPU_IDLE
select ARM_ERRATA_754322
@@ -11,8 +11,8 @@ menuconfig ARCH_STI
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420
- select PL310_ERRATA_753970 if CACHE_PL310
- select PL310_ERRATA_769419 if CACHE_PL310
+ select PL310_ERRATA_753970 if CACHE_L2X0
+ select PL310_ERRATA_769419 if CACHE_L2X0
help
Include support for STiH41x SOCs like STiH415/416 using the device tree
for discovery
@@ -16,7 +16,7 @@ config ARCH_U8500
select PINCTRL
select PINCTRL_ABX500
select PINCTRL_NOMADIK
- select PL310_ERRATA_753970 if CACHE_PL310
+ select PL310_ERRATA_753970 if CACHE_L2X0
help
Support for ST-Ericsson's Ux500 architecture
@@ -44,7 +44,7 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
bool "Enable A5 and A9 only errata work-arounds"
default y
select ARM_ERRATA_720789
- select PL310_ERRATA_753970 if CACHE_PL310
+ select PL310_ERRATA_753970 if CACHE_L2X0
help
Provides common dependencies for Versatile Express platforms
based on Cortex-A5 and Cortex-A9 processors. In order to
@@ -889,9 +889,10 @@ config CACHE_L2X0
help
This option enables the L2x0 PrimeCell.
+if CACHE_L2X0
+
config CACHE_PL310
bool
- depends on CACHE_L2X0
default y if CPU_V7 && !(CPU_V6 || CPU_V6K)
help
This option enables optimisations for the PL310 cache
@@ -899,7 +900,6 @@ config CACHE_PL310
config PL310_ERRATA_588369
bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
- depends on CACHE_L2X0
help
The PL310 L2 cache controller implements three types of Clean &
Invalidate maintenance operations: by Physical Address
@@ -912,7 +912,6 @@ config PL310_ERRATA_588369
config PL310_ERRATA_727915
bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
- depends on CACHE_L2X0
help
PL310 implements the Clean & Invalidate by Way L2 cache maintenance
operation (offset 0x7FC). This operation runs in background so that
@@ -923,7 +922,6 @@ config PL310_ERRATA_727915
config PL310_ERRATA_753970
bool "PL310 errata: cache sync operation may be faulty"
- depends on CACHE_PL310
help
This option enables the workaround for the 753970 PL310 (r3p0) erratum.
@@ -938,7 +936,6 @@ config PL310_ERRATA_753970
config PL310_ERRATA_769419
bool "PL310 errata: no automatic Store Buffer drain"
- depends on CACHE_L2X0
help
On revisions of the PL310 prior to r3p2, the Store Buffer does
not automatically drain. This can cause normal, non-cacheable
@@ -948,6 +945,8 @@ config PL310_ERRATA_769419
on systems with an outer cache, the store buffer is drained
explicitly.
+endif
+
config CACHE_TAUROS2
bool "Enable the Tauros2 L2 cache controller"
depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4)