| Message ID | 20140209134701.GA22132@S2101-09.ap.freescale.net |
|---|---|
| State | New |
| Headers | show |
On Sun, Feb 09, 2014 at 09:47:07PM +0800, Shawn Guo wrote: > The following changes since commit 38dbfb59d1175ef458d006556061adeaa8751b72: > > Linus 3.14-rc1 (2014-02-02 16:42:13 -0800) > > are available in the git repository at: > > git://git.linaro.org/people/shawnguo/linux-2.6.git tags/imx6-dt-3.15 > > for you to fetch changes up to 22030dea67461df3fefb360ed33c6e2fbd578c9e: > > ARM: dts: imx6q: Add support for Zealz GK802 (2014-02-09 21:30:04 +0800) > > ---------------------------------------------------------------- > i.MX6 device tree changes for 3.15: > - A good number of new i.MX6 boards support: cm-fx6, dmo-edmqmx6, > nitrogen6x, Gateworks Ventana gw5xxx family, DFI FS700-M60 and > Zealz GK802 > - Update imx6q-sabrelite device tree and add Dual Lite/Solo support > - Move pins that are used by particular client device out of hog group > - Use GPIO_6 for FEC interrupt to workaround a hardware bug (ERR006687 > ENET: Only the ENET wake-up interrupt request can wake the system > from Wait mode.) > - Make pinctrl nodes board specific to avoid floating board specific > device tree blob with so many unused pinctrl data > - Use generic node name for fixed regulator > - Update OPP table for cpufreq support > - Random updates on various board device tree sources, adding pinctrl > settings, device nodes, properties, etc. Pulled, thanks. -Olof
The following changes since commit 38dbfb59d1175ef458d006556061adeaa8751b72: Linus 3.14-rc1 (2014-02-02 16:42:13 -0800) are available in the git repository at: git://git.linaro.org/people/shawnguo/linux-2.6.git tags/imx6-dt-3.15 for you to fetch changes up to 22030dea67461df3fefb360ed33c6e2fbd578c9e: ARM: dts: imx6q: Add support for Zealz GK802 (2014-02-09 21:30:04 +0800) ---------------------------------------------------------------- i.MX6 device tree changes for 3.15: - A good number of new i.MX6 boards support: cm-fx6, dmo-edmqmx6, nitrogen6x, Gateworks Ventana gw5xxx family, DFI FS700-M60 and Zealz GK802 - Update imx6q-sabrelite device tree and add Dual Lite/Solo support - Move pins that are used by particular client device out of hog group - Use GPIO_6 for FEC interrupt to workaround a hardware bug (ERR006687 ENET: Only the ENET wake-up interrupt request can wake the system from Wait mode.) - Make pinctrl nodes board specific to avoid floating board specific device tree blob with so many unused pinctrl data - Use generic node name for fixed regulator - Update OPP table for cpufreq support - Random updates on various board device tree sources, adding pinctrl settings, device nodes, properties, etc. ---------------------------------------------------------------- Anson Huang (7): ARM: dts: imx6q: update setting of VDDARM_CAP voltage ARM: dts: imx6q: add vddsoc/pu setpoint info ARM: dts: imx6dl: enable cpufreq support ARM: dts: imx6qdl: add necessary thermal clk ARM: dts: imx6qdl-sabresd: Add power key support ARM: dts: imx6sl: add ocram device support ARM: dts: imx6sl: add keypad support for i.mx6sl-evk board. Fabio Estevam (6): ARM: dts: imx6q-udoo: Add Ethernet support ARM: dts: imx6q-sabrelite: Remove duplicate GPIO entry ARM: dts: imx6q-sabrelite: Place 'status' as the last node ARM: dts: imx6: Use 'vddarm' as the regulator name ARM: dts: imx6qdl-sabresd: Add PFUZE100 support ARM: dts: imx6qdl-sabreauto: Add LVDS support Frank Li (1): ARM: dts: imx6qdl: enable dma for spi John Tobias (1): ARM: dts: imx6sl: Adding cpu frequency and VDDSOC/PU table. Lothar Waßmann (1): ARM: dts: imx6qdl: add aliases for can interfaces Marek Vasut (1): ARM: dts: imx6q-sabrelite: Enable PCI express Markus Pargmann (1): ARM: dts: imx6: use imx51-ssi Nicolin Chen (2): ARM: dts: imx: specify the value of audmux pinctrl instead of 0x80000000 ARM: dts: imx6qdl: add spdif support for sabreauto Peter Chen (3): ARM: dts: imx6q-arm2: enable USB OTG ARM: dts: imx6: add anatop phandle for usbphy ARM: dts: imx6: add mxs phy controller id Philipp Zabel (1): ARM: dts: imx6q-sabrelite: PHY reset is active-low Sascha Hauer (4): ARM: dts: imx6q: Add spi4 alias ARM: dts: imx6qdl: Add mmc aliases ARM: dts: imx6: Add DFI FS700-M60 board support ARM: dts: imx6q: Add support for Zealz GK802 Shawn Guo (3): ARM: dts: imx6qdl: make pinctrl nodes board specific ARM: dts: imx6sl: make pinctrl nodes board specific ARM: dts: imx6: use generic node name for fixed regulator Silvio F (2): DT: Add Data Modul vendor prefix ARM: dts: imx6: Add support for imx6q dmo edmqmx6 Tim Harvey (2): ARM: dts: disable flexcan by default ARM: dts: add Gateworks Ventana support Troy Kisky (26): ARM: dts: imx: pinfunc: add MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT ARM: dts: imx: imx6qdl.dtsi: add mipi_csi tag ARM: dts: imx: imx6q.dtsi: use IRQ_TYPE_LEVEL_HIGH ARM: dts: imx: imx6dl.dtsi: use IRQ_TYPE_LEVEL_HIGH ARM: dts: imx: imx6sl.dtsi: use IRQ_TYPE_LEVEL_HIGH ARM: dts: imx: imx6qdl.dtsi: use IRQ_TYPE_LEVEL_HIGH ARM: dts: imx: sabrelite: add Dual Lite/Solo support ARM: dts: imx6qdl-sabrelite: Add uart1 support ARM: dts: imx6qdl-sabrelite: remove usdhc4 wp-gpio ARM: dts: imx6qdl-sabrelite: move USDHC4 CD to pinctrl_usdhc4 ARM: dts: imx6qdl-sabrelite: move USDHC3 CD/WP to pinctrl_usdhc3 ARM: dts: imx6qdl-sabrelite: move spi-nor CS to pinctrl_ecspi1 ARM: dts: imx6qdl-sabrelite: move usbotg power enable to pinctrl_usbotg ARM: dts: imx6qdl-sabrelite: move phy reset to pinctrl_enet ARM: dts: imx6qdl-sabrelite: explicitly set pad for SGTL5000 sys_mclk ARM: dts: imx6qdl-sabrelite: add pwms for backlights ARM: dts: imx6qdl-sabrelite: add skews for Micrel phy ARM: dts: imx6qdl-sabrelite: fix ENET group ARM: dts: imx6qdl-sabrelite: Add over-current pin to usbotg ARM: dts: imx: add nitrogen6x board ARM: dts: imx6qdl-sabrelite: add gpio-keys ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ ARM: dts: imx6qdl: use interrupts-extended for fec ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt. ARM: dts: imx6qdl-sabreauto: use GPIO_6 for FEC interrupt. ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt. Valentin Raevsky (1): ARM: dts: Add initial support for cm-fx6. .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/Makefile | 17 + arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts | 23 + arch/arm/boot/dts/imx6dl-gw51xx.dts | 19 + arch/arm/boot/dts/imx6dl-gw52xx.dts | 19 + arch/arm/boot/dts/imx6dl-gw53xx.dts | 19 + arch/arm/boot/dts/imx6dl-gw54xx.dts | 19 + arch/arm/boot/dts/imx6dl-nitrogen6x.dts | 21 + arch/arm/boot/dts/imx6dl-pinfunc.h | 2 + arch/arm/boot/dts/imx6dl-sabrelite.dts | 20 + arch/arm/boot/dts/imx6dl.dtsi | 29 +- arch/arm/boot/dts/imx6q-arm2.dts | 140 ++- arch/arm/boot/dts/imx6q-cm-fx6.dts | 107 +++ arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts | 23 + arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 372 ++++++++ arch/arm/boot/dts/imx6q-gk802.dts | 171 ++++ arch/arm/boot/dts/imx6q-gw51xx.dts | 19 + arch/arm/boot/dts/imx6q-gw52xx.dts | 23 + arch/arm/boot/dts/imx6q-gw53xx.dts | 23 + arch/arm/boot/dts/imx6q-gw5400-a.dts | 546 ++++++++++++ arch/arm/boot/dts/imx6q-gw54xx.dts | 23 + arch/arm/boot/dts/imx6q-nitrogen6x.dts | 25 + arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi | 85 +- arch/arm/boot/dts/imx6q-pinfunc.h | 2 + arch/arm/boot/dts/imx6q-sabrelite.dts | 178 +--- arch/arm/boot/dts/imx6q-sbc6x.dts | 58 +- arch/arm/boot/dts/imx6q-udoo.dts | 54 +- arch/arm/boot/dts/imx6q.dtsi | 21 +- arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi | 199 +++++ arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 374 ++++++++ arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 490 ++++++++++ arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 553 ++++++++++++ arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 580 ++++++++++++ arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 422 +++++++++ arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 246 ++++- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 423 +++++++++ arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 272 +++++- arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 128 ++- arch/arm/boot/dts/imx6qdl.dtsi | 938 +++----------------- arch/arm/boot/dts/imx6sl-evk.dts | 210 ++++- arch/arm/boot/dts/imx6sl.dtsi | 385 +++----- 41 files changed, 5919 insertions(+), 1360 deletions(-) create mode 100644 arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts create mode 100644 arch/arm/boot/dts/imx6dl-gw51xx.dts create mode 100644 arch/arm/boot/dts/imx6dl-gw52xx.dts create mode 100644 arch/arm/boot/dts/imx6dl-gw53xx.dts create mode 100644 arch/arm/boot/dts/imx6dl-gw54xx.dts create mode 100644 arch/arm/boot/dts/imx6dl-nitrogen6x.dts create mode 100644 arch/arm/boot/dts/imx6dl-sabrelite.dts create mode 100644 arch/arm/boot/dts/imx6q-cm-fx6.dts create mode 100644 arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts create mode 100644 arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts create mode 100644 arch/arm/boot/dts/imx6q-gk802.dts create mode 100644 arch/arm/boot/dts/imx6q-gw51xx.dts create mode 100644 arch/arm/boot/dts/imx6q-gw52xx.dts create mode 100644 arch/arm/boot/dts/imx6q-gw53xx.dts create mode 100644 arch/arm/boot/dts/imx6q-gw5400-a.dts create mode 100644 arch/arm/boot/dts/imx6q-gw54xx.dts create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6x.dts create mode 100644 arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi create mode 100644 arch/arm/boot/dts/imx6qdl-gw51xx.dtsi create mode 100644 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi create mode 100644 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi create mode 100644 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi create mode 100644 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi