diff mbox

[v4,1/2] ARM: imx: add select on ARCH_MXC for cpufreq support

Message ID 20140113060102.GO23525@S2101-09.ap.freescale.net
State New
Headers show

Commit Message

Shawn Guo Jan. 13, 2014, 6:01 a.m. UTC
On Sun, Jan 12, 2014 at 08:54:18PM -0800, John Tobias wrote:
> I tested leaving the HAVE_IMX_ANATOP under SOC_IMX6Q and SOC_IMX6SL.
> The iMX6Q cpufreq driver won't show up in menu config / gconfig and
> that's the reason why I added it.

I tested the following changes against my for-next branch, and I can see
iMX6Q cpufreq driver in menuconfig.  Note, the
drivers/cpufreq/Kconfig.arm change is on cpufreq tree, so I have to make
the change locally for the testing.

Shawn

Comments

John Tobias Jan. 14, 2014, 9:37 p.m. UTC | #1
I made a mistake. The HAVE_IMX_ANATOP doesn't require to move up. It
should be ARCH_HAS_OPP.



On Sun, Jan 12, 2014 at 10:01 PM, Shawn Guo <shawn.guo@linaro.org> wrote:
> On Sun, Jan 12, 2014 at 08:54:18PM -0800, John Tobias wrote:
>> I tested leaving the HAVE_IMX_ANATOP under SOC_IMX6Q and SOC_IMX6SL.
>> The iMX6Q cpufreq driver won't show up in menu config / gconfig and
>> that's the reason why I added it.
>
> I tested the following changes against my for-next branch, and I can see
> iMX6Q cpufreq driver in menuconfig.  Note, the
> drivers/cpufreq/Kconfig.arm change is on cpufreq tree, so I have to make
> the change locally for the testing.
>
> Shawn
>
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 1e70150..7071468 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -1,5 +1,7 @@
>  config ARCH_MXC
>         bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 ||
> ARCH_MULTI_V6_V7
> +       select ARCH_HAS_CPUFREQ
> +       select ARCH_HAS_OPP
>         select ARCH_REQUIRE_GPIOLIB
>         select ARM_CPU_SUSPEND if PM
>         select ARM_PATCH_PHYS_VIRT
> @@ -12,6 +14,7 @@ config ARCH_MXC
>         select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
>         select MULTI_IRQ_HANDLER
>         select PINCTRL
> +       select PM_OPP if PM
>         select SOC_BUS
>         select SPARSE_IRQ
>         select USE_OF
> @@ -787,8 +790,6 @@ config      SOC_IMX53
>
>  config SOC_IMX6Q
>         bool "i.MX6 Quad/DualLite support"
> -       select ARCH_HAS_CPUFREQ
> -       select ARCH_HAS_OPP
>         select ARM_ERRATA_754322
>         select ARM_ERRATA_764369 if SMP
>         select ARM_ERRATA_775420
> @@ -808,7 +809,6 @@ config SOC_IMX6Q
>         select PL310_ERRATA_588369 if CACHE_PL310
>         select PL310_ERRATA_727915 if CACHE_PL310
>         select PL310_ERRATA_769419 if CACHE_PL310
> -       select PM_OPP if PM
>
>         help
>           This enables support for Freescale i.MX6 Quad processor.
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index ce52ed9..21e069e 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -80,7 +80,7 @@ config ARM_HIGHBANK_CPUFREQ
>
>  config ARM_IMX6Q_CPUFREQ
>         tristate "Freescale i.MX6Q cpufreq support"
> -       depends on SOC_IMX6Q
> +       depends on ARCH_MXC
>         depends on REGULATOR_ANATOP
>         help
>           This adds cpufreq driver support for Freescale i.MX6Q SOC.
>
>
diff mbox

Patch

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 1e70150..7071468 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,5 +1,7 @@ 
 config ARCH_MXC
        bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 ||
ARCH_MULTI_V6_V7
+       select ARCH_HAS_CPUFREQ
+       select ARCH_HAS_OPP
        select ARCH_REQUIRE_GPIOLIB
        select ARM_CPU_SUSPEND if PM
        select ARM_PATCH_PHYS_VIRT
@@ -12,6 +14,7 @@  config ARCH_MXC
        select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
        select MULTI_IRQ_HANDLER
        select PINCTRL
+       select PM_OPP if PM
        select SOC_BUS
        select SPARSE_IRQ
        select USE_OF
@@ -787,8 +790,6 @@  config      SOC_IMX53

 config SOC_IMX6Q
        bool "i.MX6 Quad/DualLite support"
-       select ARCH_HAS_CPUFREQ
-       select ARCH_HAS_OPP
        select ARM_ERRATA_754322
        select ARM_ERRATA_764369 if SMP
        select ARM_ERRATA_775420
@@ -808,7 +809,6 @@  config SOC_IMX6Q
        select PL310_ERRATA_588369 if CACHE_PL310
        select PL310_ERRATA_727915 if CACHE_PL310
        select PL310_ERRATA_769419 if CACHE_PL310
-       select PM_OPP if PM

        help
          This enables support for Freescale i.MX6 Quad processor.
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index ce52ed9..21e069e 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -80,7 +80,7 @@  config ARM_HIGHBANK_CPUFREQ

 config ARM_IMX6Q_CPUFREQ
        tristate "Freescale i.MX6Q cpufreq support"
-       depends on SOC_IMX6Q
+       depends on ARCH_MXC
        depends on REGULATOR_ANATOP
        help
          This adds cpufreq driver support for Freescale i.MX6Q SOC.