diff mbox

[REGRESSION+BISECT] imx6: 3.8+: sata failure with 24d340ac "ARM i.MX6: Fix ethernet PLL clocks"

Message ID 20130131133054.GD2735@S2101-09.ap.freescale.net
State New
Headers show

Commit Message

Shawn Guo Jan. 31, 2013, 1:30 p.m. UTC 
On Thu, Jan 31, 2013 at 12:36:27PM +0100, Paolo Pisati wrote:
> Hi,
> 
> sata doesn't work anymore in 3.8rcX (while it was ok in 3.7 + 1 patch[1]) and i've bisected
> it down to:
> 
Technically, it's not a regression since vanilla 3.7 kernel does not
have SATA work out of box.  So we do not have to maintain the function
when changing clock code.

Can you please try to see if the following change bring that SATA back
to work?

Shawn

Comments

Paolo Pisati Jan. 31, 2013, 1:53 p.m. UTC | #1 
On Thu, Jan 31, 2013 at 09:30:56PM +0800, Shawn Guo wrote:
> 
> Can you please try to see if the following change bring that SATA back
> to work?
> 
> Shawn
> 
> diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
> index c0c4e72..8f756af 100644
> --- a/arch/arm/mach-imx/clk-imx6q.c
> +++ b/arch/arm/mach-imx/clk-imx6q.c
> @@ -436,6 +436,9 @@ int __init mx6q_clocks_init(void)
>         for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
>                 clk_prepare_enable(clk[clks_init_on[i]]);
> 
> +       if (IS_ENABLED(CONFIG_SATA_AHCI_PLATFORM))
> +               clk_prepare_enable(clk[sata_ref_100m]);
> +
>         /* Set initial power mode */
>         imx6q_set_lpm(WAIT_CLOCKED);

yes, it fixes SATA.

Tested-by: <p.pisati@gmail.com>
Shawn Guo Jan. 31, 2013, 2:26 p.m. UTC | #2 
On Thu, Jan 31, 2013 at 02:53:51PM +0100, Paolo Pisati wrote:
> On Thu, Jan 31, 2013 at 09:30:56PM +0800, Shawn Guo wrote:
> > 
> > Can you please try to see if the following change bring that SATA back
> > to work?
> > 
> > Shawn
> > 
> > diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
> > index c0c4e72..8f756af 100644
> > --- a/arch/arm/mach-imx/clk-imx6q.c
> > +++ b/arch/arm/mach-imx/clk-imx6q.c
> > @@ -436,6 +436,9 @@ int __init mx6q_clocks_init(void)
> >         for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
> >                 clk_prepare_enable(clk[clks_init_on[i]]);
> > 
> > +       if (IS_ENABLED(CONFIG_SATA_AHCI_PLATFORM))
> > +               clk_prepare_enable(clk[sata_ref_100m]);
> > +
> >         /* Set initial power mode */
> >         imx6q_set_lpm(WAIT_CLOCKED);
> 
> yes, it fixes SATA.
> 
> Tested-by: <p.pisati@gmail.com>

Just to be clear, I'm not sending this change to mainline, as I expect
someone who cares about SATA function adds this code when he submits
imx6q SATA support (that out of tree patch).

Shawn
diff mbox

Patch

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index c0c4e72..8f756af 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -436,6 +436,9 @@  int __init mx6q_clocks_init(void)
        for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
                clk_prepare_enable(clk[clks_init_on[i]]);

+       if (IS_ENABLED(CONFIG_SATA_AHCI_PLATFORM))
+               clk_prepare_enable(clk[sata_ref_100m]);
+
        /* Set initial power mode */
        imx6q_set_lpm(WAIT_CLOCKED);