From patchwork Tue Apr 17 17:50:46 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Tony Lindgren X-Patchwork-Id: 153263 Return-Path: X-Original-To: incoming-imx@patchwork.ozlabs.org Delivered-To: patchwork-incoming-imx@bilbo.ozlabs.org Received: from merlin.infradead.org (merlin.infradead.org [IPv6:2001:4978:20e::2]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTPS id 3DE6AB7049 for ; Wed, 18 Apr 2012 03:53:21 +1000 (EST) Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1SKCYM-0003dv-CV; Tue, 17 Apr 2012 17:50:58 +0000 Received: from mho-01-ewr.mailhop.org ([204.13.248.71]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1SKCYG-0003c5-1N for linux-arm-kernel@lists.infradead.org; Tue, 17 Apr 2012 17:50:56 +0000 Received: from c-98-234-237-12.hsd1.ca.comcast.net ([98.234.237.12] helo=localhost.localdomain) by mho-01-ewr.mailhop.org with esmtpa (Exim 4.72) (envelope-from ) id 1SKCYD-0004bj-Hu; Tue, 17 Apr 2012 17:50:49 +0000 Received: from Mutt by mutt-smtp-wrapper.pl 1.2 (www.zdo.com/articles/mutt-smtp-wrapper.shtml) X-Mail-Handler: MailHop Outbound by DynDNS X-Originating-IP: 98.234.237.12 X-Report-Abuse-To: abuse@dyndns.com (see http://www.dyndns.com/services/mailhop/outbound_abuse.html for abuse reporting information) X-MHO-User: U2FsdGVkX19tzQEsChwVagOZC0VvMpOK Date: Tue, 17 Apr 2012 10:50:46 -0700 From: Tony Lindgren To: Russ Dill Subject: Re: [PATCH 1/2] OMAP2+: UART: Fix incorrect population of default uart pads Message-ID: <20120417175046.GE21106@atomide.com> References: <1334065246-21294-1-git-send-email-govindraj.raja@ti.com> <1334065246-21294-2-git-send-email-govindraj.raja@ti.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.5.20 (2009-06-14) X-Spam-Note: CRM114 invocation failed X-Spam-Score: -1.9 (-) X-Spam-Report: SpamAssassin version 3.3.2 on merlin.infradead.org summary: Content analysis details: (-1.9 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no trust [204.13.248.71 listed in list.dnswl.org] 0.0 UNPARSEABLE_RELAY Informational: message has unparseable relay lines -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] Cc: Kevin Hilman , "Govindraj.R" , linux-omap@vger.kernel.org, Felipe Balbi , linux-arm-kernel@lists.infradead.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.14 Precedence: list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-arm-kernel-bounces@lists.infradead.org Errors-To: linux-arm-kernel-bounces+incoming-imx=patchwork.ozlabs.org@lists.infradead.org List-Id: linux-imx-kernel.lists.patchwork.ozlabs.org * Russ Dill [120413 16:17]: > On Tue, Apr 10, 2012 at 6:40 AM, Govindraj.R wrote: > > From: "Govindraj.R" > > > > The following commit: > > (7496ba3  ARM: OMAP2+: UART: Add default mux for all uarts) > > added default pads for all uarts. But not all boards tend to > > use all uarts and most of unused uart pins are muxed for > > other purpose. This commit breaks the modules which where trying > > to use unused uart pins on their boards. > > > > So remove the default pads adding. > > > > Cc: Felipe Balbi > > Cc: Kevin Hilman > > Cc: Russ Dill > > Reported-by: Tony Lindgren > > Signed-off-by: Govindraj.R > > Acked-by: Russ Dill Applying this into fixes with the updated comments as below. Tony From: "Govindraj.R" Date: Tue, 17 Apr 2012 10:35:47 -0700 Subject: [PATCH] ARM: OMAP2+: UART: Fix incorrect population of default uart pads Commit (7496ba3 ARM: OMAP2+: UART: Add default mux for all uarts) wrongly added muxing of default pads for all uarts. This causes breakage on multiple boards using uart pins for alternate functions. For example, on zoom3 random oopses can be seen with nfsroot as the smsc911x ethernet FIFO timings on GPMC bus are controlled by gpmc_wait2 and gpmc_wait3 pins. This means we can't mux these pads to uart4 functionality as commit 7496ba3 was doing. Not all boards tend to use all uarts and most of unused uart pins are muxed for other purpose. This commit breaks the modules which where trying to use unused uart pins on their boards. So remove the default pad muxing. Note that this is not a complete fix, as we now rely on bootloader set muxing for the uart wake-up events. Further patching is needed to enable wake-up events for uarts that are already muxed to uart mode. Cc: Felipe Balbi Cc: Kevin Hilman Acked-by: Russ Dill Reported-by: Tony Lindgren Signed-off-by: Govindraj.R [tony@atomide.com: updated comments to describe oops on zoom3] Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 0cdd359..2e351f5 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -120,124 +120,8 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX -static struct omap_device_pad default_uart1_pads[] __initdata = { - { - .name = "uart1_cts.uart1_cts", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart1_rts.uart1_rts", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart1_tx.uart1_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart1_rx.uart1_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_uart2_pads[] __initdata = { - { - .name = "uart2_cts.uart2_cts", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart2_rts.uart2_rts", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart2_tx.uart2_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart2_rx.uart2_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_uart3_pads[] __initdata = { - { - .name = "uart3_cts_rctx.uart3_cts_rctx", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart3_rts_sd.uart3_rts_sd", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart3_tx_irtx.uart3_tx_irtx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart3_rx_irrx.uart3_rx_irrx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = { - { - .name = "gpmc_wait2.uart4_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "gpmc_wait3.uart4_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE2, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE2, - }, -}; - -static struct omap_device_pad default_omap4_uart4_pads[] __initdata = { - { - .name = "uart4_tx.uart4_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart4_rx.uart4_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - }, -}; - static void omap_serial_fill_default_pads(struct omap_board_data *bdata) { - switch (bdata->id) { - case 0: - bdata->pads = default_uart1_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads); - break; - case 1: - bdata->pads = default_uart2_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads); - break; - case 2: - bdata->pads = default_uart3_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads); - break; - case 3: - if (cpu_is_omap44xx()) { - bdata->pads = default_omap4_uart4_pads; - bdata->pads_cnt = - ARRAY_SIZE(default_omap4_uart4_pads); - } else if (cpu_is_omap3630()) { - bdata->pads = default_omap36xx_uart4_pads; - bdata->pads_cnt = - ARRAY_SIZE(default_omap36xx_uart4_pads); - } - break; - default: - break; - } } #else static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}