| Message ID | 20111016193301.GJ1459@game.jcrosoft.org |
|---|---|
| State | New |
| Headers | show |
On 10/16/2011 09:33 PM, Jean-Christophe PLAGNIOL-VILLARD : > Hi Arnd, > > This containts the work on > - gpio rework > - usb overcurrent support > - merge of two boards > - two new boards > - defconfig rework to have all boards compiled > - ochi clock rework Arnd, Can you hold on a little bit on this pull request. It seems that there are some rework to be done. Moreover, I guess that you prefer to get those enhancements feature-by-feature and on top of what you currently have from at91 side... We will come back to you with this material in a different shape. Best regards, > Please pull > The following changes since commit ddf28352b80c86754a6424e3a61e8bdf9213b3c7: > > Linux 3.1-rc5 (2011-09-04 15:45:10 -0700) > > are available in the git repository at: > git://github.com/at91linux/linux-at91.git j/for-arnd > > Jean-Christophe PLAGNIOL-VILLARD (17): > at91: USB-A9G20 C01 & C11 board support > at91: ohci-at91: always provide all the clocks > ARM: at91/gpio: make gpio register base soc independant > ARM: at91/boards: use -EINVAL for invalid gpio > ARM: at91/soc: use gpio_is_valid to check the gpio > ARM: at91/pata: use gpio_is_valid to check the gpio > ARM: at91/ide: use gpio_is_valid to check the gpio > ARM: at91/mmc: use gpio_is_valid to check the gpio > ARM: at92/nand: use gpio_is_valid to check the gpio > ARM: at92/udc: use gpio_is_valid to check the gpio > ARM: at92/ohci: use gpio_is_valid to check the gpio > ARM: at91/gpio: drop PIN_BASE > ARM: at91/gpio: fix display of number of irq setuped > ARM: at91: rename at91sam9260ek_defconfig to at91sam9260_defconfig > ARM: at91: rename at91sam9g20ek_defconfig to at91sam9g20_defconfig > ARM: at91: rename at91cap9adk_defconfig to at91cap9_defconfig > ARM: at91: rename at91sam9rlek_defconfig to at91sam9rl_defconfig > > Josef Holzmayr (1): > at91: add support for RSIs EWS board > > Nico Erfurth (1): > at91: merge board USB-A9260 and USB-A9263 together > > Thomas Petazzoni (3): > at91: ohci-at91: add vbus_pin_inverted platform attribute > at91: at91-ohci: support overcurrent notification > at91: at91-ohci: configure overcurrent pins as input GPIOs > > .../{at91cap9adk_defconfig => at91cap9_defconfig} | 5 - > ...91sam9260ek_defconfig => at91sam9260_defconfig} | 14 +- > ...91sam9g20ek_defconfig => at91sam9g20_defconfig} | 19 +- > ...at91sam9rlek_defconfig => at91sam9rl_defconfig} | 5 - > arch/arm/mach-at91/Kconfig | 13 + > arch/arm/mach-at91/Makefile | 6 +- > arch/arm/mach-at91/at91cap9.c | 10 +- > arch/arm/mach-at91/at91cap9_devices.c | 26 +- > arch/arm/mach-at91/at91rm9200.c | 10 +- > arch/arm/mach-at91/at91rm9200_devices.c | 30 ++- > arch/arm/mach-at91/at91sam9260.c | 8 +- > arch/arm/mach-at91/at91sam9260_devices.c | 34 ++- > arch/arm/mach-at91/at91sam9261.c | 35 +- > arch/arm/mach-at91/at91sam9261_devices.c | 22 +- > arch/arm/mach-at91/at91sam9263.c | 12 +- > arch/arm/mach-at91/at91sam9263_devices.c | 32 ++- > arch/arm/mach-at91/at91sam9g45.c | 12 +- > arch/arm/mach-at91/at91sam9g45_devices.c | 26 +- > arch/arm/mach-at91/at91sam9rl.c | 8 +- > arch/arm/mach-at91/at91sam9rl_devices.c | 16 +- > arch/arm/mach-at91/board-1arm.c | 1 + > arch/arm/mach-at91/board-afeb-9260v1.c | 7 +- > arch/arm/mach-at91/board-cam60.c | 3 +- > arch/arm/mach-at91/board-cap9adk.c | 14 +- > arch/arm/mach-at91/board-carmeva.c | 6 +- > arch/arm/mach-at91/board-cpu9krea.c | 7 +- > arch/arm/mach-at91/board-cpuat91.c | 4 + > arch/arm/mach-at91/board-csb337.c | 4 +- > arch/arm/mach-at91/board-csb637.c | 1 + > arch/arm/mach-at91/board-eb9200.c | 8 +- > arch/arm/mach-at91/board-ecbat91.c | 4 + > arch/arm/mach-at91/board-eco920.c | 4 + > arch/arm/mach-at91/board-flexibity.c | 4 +- > arch/arm/mach-at91/board-foxg20.c | 6 +- > arch/arm/mach-at91/board-gsia18s.c | 4 +- > arch/arm/mach-at91/board-kafa.c | 1 + > arch/arm/mach-at91/board-kb9202.c | 5 +- > arch/arm/mach-at91/board-neocore926.c | 4 +- > arch/arm/mach-at91/board-pcontrol-g20.c | 1 + > arch/arm/mach-at91/board-picotux200.c | 2 + > arch/arm/mach-at91/board-qil-a9260.c | 11 +- > arch/arm/mach-at91/board-rm9200dk.c | 10 +- > arch/arm/mach-at91/board-rm9200ek.c | 2 + > arch/arm/mach-at91/board-rsi-ews.c | 233 ++++++++++++++ > arch/arm/mach-at91/board-sam9-l9260.c | 7 +- > arch/arm/mach-at91/board-sam9260ek.c | 11 +- > arch/arm/mach-at91/board-sam9261ek.c | 8 +- > arch/arm/mach-at91/board-sam9263ek.c | 7 +- > arch/arm/mach-at91/board-sam9g20ek.c | 8 +- > arch/arm/mach-at91/board-sam9m10g45ek.c | 3 + > arch/arm/mach-at91/board-sam9rlek.c | 7 +- > arch/arm/mach-at91/board-snapper9260.c | 5 + > arch/arm/mach-at91/board-stamp9g20.c | 11 +- > arch/arm/mach-at91/board-usb-a9260.c | 230 -------------- > .../{board-usb-a9263.c => board-usb-a926x.c} | 184 ++++++++++-- > arch/arm/mach-at91/board-yl-9200.c | 6 +- > arch/arm/mach-at91/generic.h | 2 +- > arch/arm/mach-at91/gpio.c | 62 ++-- > arch/arm/mach-at91/include/mach/at91cap9.h | 9 +- > arch/arm/mach-at91/include/mach/at91rm9200.h | 9 +- > arch/arm/mach-at91/include/mach/at91sam9260.h | 7 +- > arch/arm/mach-at91/include/mach/at91sam9261.h | 7 +- > arch/arm/mach-at91/include/mach/at91sam9263.h | 11 +- > arch/arm/mach-at91/include/mach/at91sam9g45.h | 11 +- > arch/arm/mach-at91/include/mach/at91sam9rl.h | 9 +- > arch/arm/mach-at91/include/mach/board.h | 5 + > arch/arm/mach-at91/include/mach/gpio.h | 328 ++++++++++---------- > arch/arm/mach-at91/include/mach/timex.h | 5 + > drivers/ata/pata_at91.c | 6 +- > drivers/ide/at91_ide.c | 2 +- > drivers/mmc/host/at91_mci.c | 30 +- > drivers/mtd/nand/atmel_nand.c | 8 +- > drivers/usb/gadget/at91_udc.c | 14 +- > drivers/usb/host/ohci-at91.c | 243 +++++++++++++-- > 74 files changed, 1231 insertions(+), 713 deletions(-) > rename arch/arm/configs/{at91cap9adk_defconfig => at91cap9_defconfig} (95%) > rename arch/arm/configs/{at91sam9260ek_defconfig => at91sam9260_defconfig} (89%) > rename arch/arm/configs/{at91sam9g20ek_defconfig => at91sam9g20_defconfig} (93%) > rename arch/arm/configs/{at91sam9rlek_defconfig => at91sam9rl_defconfig} (94%) > create mode 100644 arch/arm/mach-at91/board-rsi-ews.c > delete mode 100644 arch/arm/mach-at91/board-usb-a9260.c > rename arch/arm/mach-at91/{board-usb-a9263.c => board-usb-a926x.c} (53%)
Hi Arnd, This containts the work on - gpio rework - usb overcurrent support - merge of two boards - two new boards - defconfig rework to have all boards compiled - ochi clock rework Please pull The following changes since commit ddf28352b80c86754a6424e3a61e8bdf9213b3c7: Linux 3.1-rc5 (2011-09-04 15:45:10 -0700) are available in the git repository at: git://github.com/at91linux/linux-at91.git j/for-arnd Jean-Christophe PLAGNIOL-VILLARD (17): at91: USB-A9G20 C01 & C11 board support at91: ohci-at91: always provide all the clocks ARM: at91/gpio: make gpio register base soc independant ARM: at91/boards: use -EINVAL for invalid gpio ARM: at91/soc: use gpio_is_valid to check the gpio ARM: at91/pata: use gpio_is_valid to check the gpio ARM: at91/ide: use gpio_is_valid to check the gpio ARM: at91/mmc: use gpio_is_valid to check the gpio ARM: at92/nand: use gpio_is_valid to check the gpio ARM: at92/udc: use gpio_is_valid to check the gpio ARM: at92/ohci: use gpio_is_valid to check the gpio ARM: at91/gpio: drop PIN_BASE ARM: at91/gpio: fix display of number of irq setuped ARM: at91: rename at91sam9260ek_defconfig to at91sam9260_defconfig ARM: at91: rename at91sam9g20ek_defconfig to at91sam9g20_defconfig ARM: at91: rename at91cap9adk_defconfig to at91cap9_defconfig ARM: at91: rename at91sam9rlek_defconfig to at91sam9rl_defconfig Josef Holzmayr (1): at91: add support for RSIs EWS board Nico Erfurth (1): at91: merge board USB-A9260 and USB-A9263 together Thomas Petazzoni (3): at91: ohci-at91: add vbus_pin_inverted platform attribute at91: at91-ohci: support overcurrent notification at91: at91-ohci: configure overcurrent pins as input GPIOs .../{at91cap9adk_defconfig => at91cap9_defconfig} | 5 - ...91sam9260ek_defconfig => at91sam9260_defconfig} | 14 +- ...91sam9g20ek_defconfig => at91sam9g20_defconfig} | 19 +- ...at91sam9rlek_defconfig => at91sam9rl_defconfig} | 5 - arch/arm/mach-at91/Kconfig | 13 + arch/arm/mach-at91/Makefile | 6 +- arch/arm/mach-at91/at91cap9.c | 10 +- arch/arm/mach-at91/at91cap9_devices.c | 26 +- arch/arm/mach-at91/at91rm9200.c | 10 +- arch/arm/mach-at91/at91rm9200_devices.c | 30 ++- arch/arm/mach-at91/at91sam9260.c | 8 +- arch/arm/mach-at91/at91sam9260_devices.c | 34 ++- arch/arm/mach-at91/at91sam9261.c | 35 +- arch/arm/mach-at91/at91sam9261_devices.c | 22 +- arch/arm/mach-at91/at91sam9263.c | 12 +- arch/arm/mach-at91/at91sam9263_devices.c | 32 ++- arch/arm/mach-at91/at91sam9g45.c | 12 +- arch/arm/mach-at91/at91sam9g45_devices.c | 26 +- arch/arm/mach-at91/at91sam9rl.c | 8 +- arch/arm/mach-at91/at91sam9rl_devices.c | 16 +- arch/arm/mach-at91/board-1arm.c | 1 + arch/arm/mach-at91/board-afeb-9260v1.c | 7 +- arch/arm/mach-at91/board-cam60.c | 3 +- arch/arm/mach-at91/board-cap9adk.c | 14 +- arch/arm/mach-at91/board-carmeva.c | 6 +- arch/arm/mach-at91/board-cpu9krea.c | 7 +- arch/arm/mach-at91/board-cpuat91.c | 4 + arch/arm/mach-at91/board-csb337.c | 4 +- arch/arm/mach-at91/board-csb637.c | 1 + arch/arm/mach-at91/board-eb9200.c | 8 +- arch/arm/mach-at91/board-ecbat91.c | 4 + arch/arm/mach-at91/board-eco920.c | 4 + arch/arm/mach-at91/board-flexibity.c | 4 +- arch/arm/mach-at91/board-foxg20.c | 6 +- arch/arm/mach-at91/board-gsia18s.c | 4 +- arch/arm/mach-at91/board-kafa.c | 1 + arch/arm/mach-at91/board-kb9202.c | 5 +- arch/arm/mach-at91/board-neocore926.c | 4 +- arch/arm/mach-at91/board-pcontrol-g20.c | 1 + arch/arm/mach-at91/board-picotux200.c | 2 + arch/arm/mach-at91/board-qil-a9260.c | 11 +- arch/arm/mach-at91/board-rm9200dk.c | 10 +- arch/arm/mach-at91/board-rm9200ek.c | 2 + arch/arm/mach-at91/board-rsi-ews.c | 233 ++++++++++++++ arch/arm/mach-at91/board-sam9-l9260.c | 7 +- arch/arm/mach-at91/board-sam9260ek.c | 11 +- arch/arm/mach-at91/board-sam9261ek.c | 8 +- arch/arm/mach-at91/board-sam9263ek.c | 7 +- arch/arm/mach-at91/board-sam9g20ek.c | 8 +- arch/arm/mach-at91/board-sam9m10g45ek.c | 3 + arch/arm/mach-at91/board-sam9rlek.c | 7 +- arch/arm/mach-at91/board-snapper9260.c | 5 + arch/arm/mach-at91/board-stamp9g20.c | 11 +- arch/arm/mach-at91/board-usb-a9260.c | 230 -------------- .../{board-usb-a9263.c => board-usb-a926x.c} | 184 ++++++++++-- arch/arm/mach-at91/board-yl-9200.c | 6 +- arch/arm/mach-at91/generic.h | 2 +- arch/arm/mach-at91/gpio.c | 62 ++-- arch/arm/mach-at91/include/mach/at91cap9.h | 9 +- arch/arm/mach-at91/include/mach/at91rm9200.h | 9 +- arch/arm/mach-at91/include/mach/at91sam9260.h | 7 +- arch/arm/mach-at91/include/mach/at91sam9261.h | 7 +- arch/arm/mach-at91/include/mach/at91sam9263.h | 11 +- arch/arm/mach-at91/include/mach/at91sam9g45.h | 11 +- arch/arm/mach-at91/include/mach/at91sam9rl.h | 9 +- arch/arm/mach-at91/include/mach/board.h | 5 + arch/arm/mach-at91/include/mach/gpio.h | 328 ++++++++++---------- arch/arm/mach-at91/include/mach/timex.h | 5 + drivers/ata/pata_at91.c | 6 +- drivers/ide/at91_ide.c | 2 +- drivers/mmc/host/at91_mci.c | 30 +- drivers/mtd/nand/atmel_nand.c | 8 +- drivers/usb/gadget/at91_udc.c | 14 +- drivers/usb/host/ohci-at91.c | 243 +++++++++++++-- 74 files changed, 1231 insertions(+), 713 deletions(-) rename arch/arm/configs/{at91cap9adk_defconfig => at91cap9_defconfig} (95%) rename arch/arm/configs/{at91sam9260ek_defconfig => at91sam9260_defconfig} (89%) rename arch/arm/configs/{at91sam9g20ek_defconfig => at91sam9g20_defconfig} (93%) rename arch/arm/configs/{at91sam9rlek_defconfig => at91sam9rl_defconfig} (94%) create mode 100644 arch/arm/mach-at91/board-rsi-ews.c delete mode 100644 arch/arm/mach-at91/board-usb-a9260.c rename arch/arm/mach-at91/{board-usb-a9263.c => board-usb-a926x.c} (53%) Best Regads, J.