mbox series

[GIT,PULL,1/3] bcm2835-dt-next-2018-09-09

Message ID 1536817833-3900-1-git-send-email-stefan.wahren@i2se.com
State New
Headers show
Series [GIT,PULL,1/3] bcm2835-dt-next-2018-09-09 | expand

Pull-request

git://github.com/anholt/linux tags/bcm2835-dt-next-2018-09-09

Message

Stefan Wahren Sept. 13, 2018, 5:50 a.m. UTC 
Hi Florian,

The following changes since commit 5b394b2ddf0347bef56e50c69a58773c94343ff3:

  Linux 4.19-rc1 (2018-08-26 14:11:59 -0700)

are available in the git repository at:

  git://github.com/anholt/linux tags/bcm2835-dt-next-2018-09-09

for you to fetch changes up to 6ef5bd6cfd5da9fe67aea031fd0a66ff77d64ad6:

  ARM: dts: bcm283x-rpi-lan7515: Enable Ethernet LEDs (2018-09-05 21:31:25 +0200)

----------------------------------------------------------------
This pull request brings in a board DT for the Raspberry Pi Compute
Module 3, its I/O board and enables the Ethernet LEDs for the RPi 3B+.

----------------------------------------------------------------
Stefan Wahren (3):
      dt-bindings: bcm: Add Raspberry Pi CM3 and CM3L
      ARM: dts: add Raspberry Pi Compute Module 3 and IO board
      ARM: dts: bcm283x-rpi-lan7515: Enable Ethernet LEDs

 .../devicetree/bindings/arm/bcm/brcm,bcm2835.txt   |  8 ++
 arch/arm/boot/dts/Makefile                         |  1 +
 arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts          | 87 ++++++++++++++++++++++
 arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi             | 52 +++++++++++++
 arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi         | 14 ++++
 5 files changed, 162 insertions(+)
 create mode 100644 arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
 create mode 100644 arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi

Comments

Florian Fainelli Sept. 13, 2018, 10:17 p.m. UTC | #1 
On 09/12/18 22:50, Stefan Wahren wrote:
> Hi Florian,
> 
> The following changes since commit 5b394b2ddf0347bef56e50c69a58773c94343ff3:
> 
>   Linux 4.19-rc1 (2018-08-26 14:11:59 -0700)
> 
> are available in the git repository at:
> 
>   git://github.com/anholt/linux tags/bcm2835-dt-next-2018-09-09
> 
> for you to fetch changes up to 6ef5bd6cfd5da9fe67aea031fd0a66ff77d64ad6:
> 
>   ARM: dts: bcm283x-rpi-lan7515: Enable Ethernet LEDs (2018-09-05 21:31:25 +0200)
> 
> ----------------------------------------------------------------
> This pull request brings in a board DT for the Raspberry Pi Compute
> Module 3, its I/O board and enables the Ethernet LEDs for the RPi 3B+.
> 
> ----------------------------------------------------------------

Merged into devicetree/next, thanks Stefan!