@@ -41,12 +41,9 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <asm/memblock.h>
#include <video/platform_lcd.h>
-#include <media/soc_camera.h>
-
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx35.h"
@@ -233,83 +230,10 @@ static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = {
MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
- /* CSI */
- MX35_PAD_TX1__IPU_CSI_D_6,
- MX35_PAD_TX0__IPU_CSI_D_7,
- MX35_PAD_CSI_D8__IPU_CSI_D_8,
- MX35_PAD_CSI_D9__IPU_CSI_D_9,
- MX35_PAD_CSI_D10__IPU_CSI_D_10,
- MX35_PAD_CSI_D11__IPU_CSI_D_11,
- MX35_PAD_CSI_D12__IPU_CSI_D_12,
- MX35_PAD_CSI_D13__IPU_CSI_D_13,
- MX35_PAD_CSI_D14__IPU_CSI_D_14,
- MX35_PAD_CSI_D15__IPU_CSI_D_15,
- MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC,
- MX35_PAD_CSI_MCLK__IPU_CSI_MCLK,
- MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK,
- MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC,
/*PMIC IRQ*/
MX35_PAD_GPIO2_0__GPIO2_0,
};
-/*
- * Camera support
-*/
-static phys_addr_t mx3_camera_base __initdata;
-#define MX35_3DS_CAMERA_BUF_SIZE SZ_8M
-
-static const struct mx3_camera_pdata mx35_3ds_camera_pdata __initconst = {
- .flags = MX3_CAMERA_DATAWIDTH_8,
- .mclk_10khz = 2000,
-};
-
-static int __init imx35_3ds_init_camera(void)
-{
- int dma, ret = -ENOMEM;
- struct platform_device *pdev =
- imx35_alloc_mx3_camera(&mx35_3ds_camera_pdata);
-
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- if (!mx3_camera_base)
- goto err;
-
- dma = dma_declare_coherent_memory(&pdev->dev,
- mx3_camera_base, mx3_camera_base,
- MX35_3DS_CAMERA_BUF_SIZE,
- DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
-
- if (!(dma & DMA_MEMORY_MAP))
- goto err;
-
- ret = platform_device_add(pdev);
- if (ret)
-err:
- platform_device_put(pdev);
-
- return ret;
-}
-
-static struct i2c_board_info mx35_3ds_i2c_camera = {
- I2C_BOARD_INFO("ov2640", 0x30),
-};
-
-static struct soc_camera_link iclink_ov2640 = {
- .bus_id = 0,
- .board_info = &mx35_3ds_i2c_camera,
- .i2c_adapter_id = 0,
- .power = NULL,
-};
-
-static struct platform_device mx35_3ds_ov2640 = {
- .name = "soc-camera-pdrv",
- .id = 0,
- .dev = {
- .platform_data = &iclink_ov2640,
- },
-};
-
static struct regulator_consumer_supply sw1_consumers[] = {
{
.supply = "cpu_vcc",
@@ -321,10 +245,6 @@ static struct regulator_consumer_supply vcam_consumers[] = {
REGULATOR_SUPPLY("VDDA", "0-000a"),
};
-static struct regulator_consumer_supply vaudio_consumers[] = {
- REGULATOR_SUPPLY("cmos_vio", "soc-camera-pdrv.0"),
-};
-
static struct regulator_init_data sw1_init = {
.constraints = {
.name = "SW1",
@@ -405,18 +325,6 @@ static struct regulator_init_data vvideo_init = {
}
};
-static struct regulator_init_data vaudio_init = {
- .constraints = {
- .name = "VAUDIO",
- .min_uV = 2300000,
- .max_uV = 3000000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .boot_on = 1
- },
- .num_consumer_supplies = ARRAY_SIZE(vaudio_consumers),
- .consumer_supplies = vaudio_consumers,
-};
-
static struct regulator_init_data vcam_init = {
.constraints = {
.name = "VCAM",
@@ -460,7 +368,6 @@ static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = {
{ .id = MC13892_VDIG, .init_data = &vdig_init },
{ .id = MC13892_VUSB2, .init_data = &vusb2_init },
{ .id = MC13892_VVIDEO, .init_data = &vvideo_init },
- { .id = MC13892_VAUDIO, .init_data = &vaudio_init },
{ .id = MC13892_VCAM, .init_data = &vcam_init },
{ .id = MC13892_VGEN1, .init_data = &vgen1_init },
{ .id = MC13892_VGEN2, .init_data = &vgen2_init },
@@ -583,8 +490,6 @@ static void __init mx35_3ds_init(void)
0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds));
imx35_add_ipu_core();
- platform_device_register(&mx35_3ds_ov2640);
- imx35_3ds_init_camera();
}
static void __init mx35_3ds_late_init(void)
@@ -607,13 +512,6 @@ static void __init mx35pdk_timer_init(void)
mx35_clocks_init();
}
-static void __init mx35_3ds_reserve(void)
-{
- /* reserve MX35_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
- mx3_camera_base = arm_memblock_steal(MX35_3DS_CAMERA_BUF_SIZE,
- MX35_3DS_CAMERA_BUF_SIZE);
-}
-
MACHINE_START(MX35_3DS, "Freescale MX35PDK")
/* Maintainer: Freescale Semiconductor, Inc */
.atag_offset = 0x100,
@@ -623,6 +521,5 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
.init_time = mx35pdk_timer_init,
.init_machine = mx35_3ds_init,
.init_late = mx35_3ds_late_init,
- .reserve = mx35_3ds_reserve,
.restart = mxc_restart,
MACHINE_END