| Message ID | 1473213558-11782-3-git-send-email-f.fainelli@gmail.com |
|---|---|
| State | New |
| Headers | show |
On Tuesday, September 6, 2016 6:59:17 PM CEST Florian Fainelli wrote: > This pull request contains Broadcom ARM-based Device Tree changes for v4.9, > please pull the following: > > - Jon adds support for the Ethernet MAC DT nodes (AMAC) and provides the > following updates for Broadcom references boards: > * New Northstar Plus reference boards added: BCM958525er, BCM958522er, > BCM988312hr, BCM958623hr and BCM958622hr > * Add SATA nodes to the BCM958625hr and XMC boards > * Add I2C nodes to the XMC board > * Fixes the amount of RAM on BCM958625HR, BCM958625K and BCM958525XMC boards > * Add the GPIO reboot method for BCM958625hr and XMC boards > > - Dhanajay adds PWM nodes for the Northstar Plus SoCs > > - Rafal adds the USB 2.0 PHY to the BCM5301x Device Tree file include > > - Stefan adds a missing USB clock to the BCM283x DT files, adds a DTSI file for > the USB host mode on BCM283x and finally documents and adds support for the > Raspberry Pi Zero > > - Florian adds support for the Northstar Plus Switch Register Access block which > enables the integrated switch on these SoCs and enables the switch ports on the > BCM958625HR reference board > I pulled this into next/dt last Thursday but forgot to send a notification. Florian already asked me about on Friday, thanks a lot for paying attention! Arnd
The following changes since commit 29b4817d4018df78086157ea3a55c1d9424a7cfc: Linux 4.8-rc1 (2016-08-07 18:18:00 -0700) are available in the git repository at: http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.9/devicetree for you to fetch changes up to 7260ecd22baa3c62ef6efaf59e7de53f4c8df800: Merge tag 'bcm2835-dt-next-2016-08-29' into devicetree/next (2016-08-30 20:02:04 -0700) ---------------------------------------------------------------- This pull request contains Broadcom ARM-based Device Tree changes for v4.9, please pull the following: - Jon adds support for the Ethernet MAC DT nodes (AMAC) and provides the following updates for Broadcom references boards: * New Northstar Plus reference boards added: BCM958525er, BCM958522er, BCM988312hr, BCM958623hr and BCM958622hr * Add SATA nodes to the BCM958625hr and XMC boards * Add I2C nodes to the XMC board * Fixes the amount of RAM on BCM958625HR, BCM958625K and BCM958525XMC boards * Add the GPIO reboot method for BCM958625hr and XMC boards - Dhanajay adds PWM nodes for the Northstar Plus SoCs - Rafal adds the USB 2.0 PHY to the BCM5301x Device Tree file include - Stefan adds a missing USB clock to the BCM283x DT files, adds a DTSI file for the USB host mode on BCM283x and finally documents and adds support for the Raspberry Pi Zero - Florian adds support for the Northstar Plus Switch Register Access block which enables the integrated switch on these SoCs and enables the switch ports on the BCM958625HR reference board ---------------------------------------------------------------- Florian Fainelli (3): ARM: dts: NSP: Add Switch Register Access Block node ARM: dts: NSP: Add BCM958625HR switch ports Merge tag 'bcm2835-dt-next-2016-08-29' into devicetree/next Jon Mason (14): dt-bindings: net: bgmac: add bindings documentation for bgmac ARM: dts: NSP: Add AMAC entries ARM: dts: NSP: Correct RAM amount for BCM958625HR board ARM: dts: NSP: Enable SATA on bcm958625hr ARM: dts: NSP: Enable SATA and add i2c devices on XMC ARM: dts: NSP: Specify RAM amount for BCM958625K board ARM: dts: NSP: Specify RAM amount for BCM958525XMC board ARM: dts: NSP: Add GPIO reboot method to bcm958625hr DTS file ARM: dts: NSP: Add GPIO reboot method to bcm958625xmc DTS file ARM: dts: NSP: Add new DT file for bcm958525er ARM: dts: NSP: Add new DT file for bcm958522er ARM: dts: NSP: Add new DT file for bcm988312hr ARM: dts: NSP: Add new DT file for bcm958623hr ARM: dts: NSP: Add new DT file for bcm958622hr Rafał Miłecki (1): ARM: BCM5301X: Specify PHY of USB 2.0 in DT Stefan Wahren (4): ARM: dts: bcm283x: Add missing USB clock ARM: dts: bcm283x: Add dtsi for USB host mode DT: bindings: bcm: Add Raspberry Pi Zero ARM: dts: bcm2835: Add Raspberry Pi Zero Yendapally Reddy Dhananjaya Reddy (1): ARM: dts: NSP: Add PWM Support to DT .../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 4 + .../devicetree/bindings/net/brcm,amac.txt | 24 +++ .../devicetree/bindings/net/brcm,bgmac-nsp.txt | 24 +++ arch/arm/boot/dts/Makefile | 8 +- arch/arm/boot/dts/bcm-nsp.dtsi | 37 +++++ arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 1 + arch/arm/boot/dts/bcm2835-rpi-a.dts | 1 + arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 1 + arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 1 + arch/arm/boot/dts/bcm2835-rpi-b.dts | 1 + arch/arm/boot/dts/bcm2835-rpi-zero.dts | 40 +++++ arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 1 + arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi | 3 + arch/arm/boot/dts/bcm283x.dtsi | 9 + arch/arm/boot/dts/bcm5301x.dtsi | 11 ++ arch/arm/boot/dts/bcm958522er.dts | 130 +++++++++++++++ arch/arm/boot/dts/bcm958525er.dts | 142 ++++++++++++++++ arch/arm/boot/dts/bcm958525xmc.dts | 44 ++++- arch/arm/boot/dts/bcm958622hr.dts | 170 +++++++++++++++++++ arch/arm/boot/dts/bcm958623hr.dts | 178 ++++++++++++++++++++ arch/arm/boot/dts/bcm958625hr.dts | 71 +++++++- arch/arm/boot/dts/bcm958625k.dts | 13 ++ arch/arm/boot/dts/bcm988312hr.dts | 182 +++++++++++++++++++++ 23 files changed, 1093 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/brcm,amac.txt create mode 100644 Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt create mode 100644 arch/arm/boot/dts/bcm2835-rpi-zero.dts create mode 100644 arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi create mode 100644 arch/arm/boot/dts/bcm958522er.dts create mode 100644 arch/arm/boot/dts/bcm958525er.dts create mode 100644 arch/arm/boot/dts/bcm958622hr.dts create mode 100644 arch/arm/boot/dts/bcm958623hr.dts create mode 100644 arch/arm/boot/dts/bcm988312hr.dts