@@ -26,11 +26,7 @@ Example:
ti,pmic-shutdown-controller;
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
dcdc1_reg: dcdc1 {
- reg = <0>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@@ -38,7 +34,6 @@ Example:
};
dcdc2_reg: dcdc2 {
- reg = <1>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -46,7 +41,6 @@ Example:
};
dcdc3_reg: dcc3 {
- reg = <2>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
@@ -54,7 +48,6 @@ Example:
};
ldo1_reg: ldo1 {
- reg = <3>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -62,7 +55,6 @@ Example:
};
ldo2_reg: ldo2 {
- reg = <4>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -70,7 +62,6 @@ Example:
};
ldo3_reg: ldo3 {
- reg = <5>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -78,7 +69,6 @@ Example:
};
ldo4_reg: ldo4 {
- reg = <6>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -285,8 +285,10 @@
};
};
+
+/include/ "tps65217.dtsi"
+
&tps {
- compatible = "ti,tps65217";
/*
* Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
* mode") at poweroff. Most BeagleBone versions do not support RTC-only
@@ -307,17 +309,12 @@
ti,pmic-shutdown-controller;
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
dcdc1_reg: regulator@0 {
- reg = <0>;
regulator-name = "vdds_dpr";
regulator-always-on;
};
dcdc2_reg: regulator@1 {
- reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@@ -327,7 +324,6 @@
};
dcdc3_reg: regulator@2 {
- reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@@ -337,25 +333,21 @@
};
ldo1_reg: regulator@3 {
- reg = <3>;
regulator-name = "vio,vrtc,vdds";
regulator-always-on;
};
ldo2_reg: regulator@4 {
- reg = <4>;
regulator-name = "vdd_3v3aux";
regulator-always-on;
};
ldo3_reg: regulator@5 {
- reg = <5>;
regulator-name = "vdd_1v8";
regulator-always-on;
};
ldo4_reg: regulator@6 {
- reg = <6>;
regulator-name = "vdd_3v3a";
regulator-always-on;
};
@@ -128,21 +128,16 @@
};
-&tps {
- compatible = "ti,tps65217";
+/include/ "tps65217.dtsi"
+&tps {
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
dcdc1_reg: regulator@0 {
- reg = <0>;
regulator-name = "vdds_dpr";
regulator-always-on;
};
dcdc2_reg: regulator@1 {
- reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@@ -152,7 +147,6 @@
};
dcdc3_reg: regulator@2 {
- reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@@ -162,28 +156,24 @@
};
ldo1_reg: regulator@3 {
- reg = <3>;
regulator-name = "vio,vrtc,vdds";
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: regulator@4 {
- reg = <4>;
regulator-name = "vdd_3v3aux";
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: regulator@5 {
- reg = <5>;
regulator-name = "vdd_1v8";
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: regulator@6 {
- reg = <6>;
regulator-name = "vdd_3v3d";
regulator-boot-on;
regulator-always-on;
@@ -375,15 +375,11 @@
wp-gpios = <&gpio3 18 0>;
};
-&tps {
- compatible = "ti,tps65217";
+#include "tps65217.dtsi"
+&tps {
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
dcdc1_reg: regulator@0 {
- reg = <0>;
/* +1.5V voltage with ±4% tolerance */
regulator-min-microvolt = <1450000>;
regulator-max-microvolt = <1550000>;
@@ -392,7 +388,6 @@
};
dcdc2_reg: regulator@1 {
- reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <915000>;
@@ -402,7 +397,6 @@
};
dcdc3_reg: regulator@2 {
- reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <915000>;
@@ -412,7 +406,6 @@
};
ldo1_reg: regulator@3 {
- reg = <3>;
/* +1.8V voltage with ±4% tolerance */
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <1870000>;
@@ -421,7 +414,6 @@
};
ldo2_reg: regulator@4 {
- reg = <4>;
/* +3.3V voltage with ±4% tolerance */
regulator-min-microvolt = <3175000>;
regulator-max-microvolt = <3430000>;
@@ -430,7 +422,6 @@
};
ldo3_reg: regulator@5 {
- reg = <5>;
/* +1.8V voltage with ±4% tolerance */
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <1870000>;
@@ -439,7 +430,6 @@
};
ldo4_reg: regulator@6 {
- reg = <6>;
/* +3.3V voltage with ±4% tolerance */
regulator-min-microvolt = <3175000>;
regulator-max-microvolt = <3430000>;
@@ -420,9 +420,9 @@
vin-supply = <&vbat>;
};
-&tps {
- compatible = "ti,tps65217";
+/include/ "tps65217.dtsi"
+&tps {
backlight {
isel = <1>; /* ISET1 */
fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
@@ -430,17 +430,12 @@
};
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
dcdc1_reg: regulator@0 {
- reg = <0>;
/* VDD_1V8 system supply */
regulator-always-on;
};
dcdc2_reg: regulator@1 {
- reg = <1>;
/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@@ -450,7 +445,6 @@
};
dcdc3_reg: regulator@2 {
- reg = <2>;
/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@@ -460,21 +454,18 @@
};
ldo1_reg: regulator@3 {
- reg = <3>;
/* VRTC 1.8V always-on supply */
regulator-name = "vrtc,vdds";
regulator-always-on;
};
ldo2_reg: regulator@4 {
- reg = <4>;
/* 3.3V rail */
regulator-name = "vdd_3v3aux";
regulator-always-on;
};
ldo3_reg: regulator@5 {
- reg = <5>;
/* VDD_3V3A 3.3V rail */
regulator-name = "vdd_3v3a";
regulator-min-microvolt = <3300000>;
@@ -482,7 +473,6 @@
};
ldo4_reg: regulator@6 {
- reg = <6>;
/* VDD_3V3B 3.3V rail */
regulator-name = "vdd_3v3b";
regulator-always-on;
@@ -395,19 +395,16 @@
pinctrl-0 = <&uart4_pins>;
};
+#include "tps65217.dtsi"
+
&tps {
- compatible = "ti,tps65217";
ti,pmic-shutdown-controller;
interrupt-parent = <&intc>;
interrupts = <7>; /* NNMI */
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
dcdc1_reg: regulator@0 {
- reg = <0>;
/* VDDS_DDR */
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
@@ -415,7 +412,6 @@
};
dcdc2_reg: regulator@1 {
- reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@@ -425,7 +421,6 @@
};
dcdc3_reg: regulator@2 {
- reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@@ -435,7 +430,6 @@
};
ldo1_reg: regulator@3 {
- reg = <3>;
/* VRTC / VIO / VDDS*/
regulator-always-on;
regulator-min-microvolt = <1800000>;
@@ -443,7 +437,6 @@
};
ldo2_reg: regulator@4 {
- reg = <4>;
/* VDD_3V3AUX */
regulator-always-on;
regulator-min-microvolt = <3300000>;
@@ -451,7 +444,6 @@
};
ldo3_reg: regulator@5 {
- reg = <5>;
/* VDD_1V8 */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -459,7 +451,6 @@
};
ldo4_reg: regulator@6 {
- reg = <6>;
/* VDD_3V3A */
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
new file mode 100644
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65217.pdf
+ */
+
+&tps {
+ compatible = "ti,tps65217";
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dcdc1_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "dcdc1";
+ };
+
+ dcdc2_reg: regulator@1 {
+ reg = <1>;
+ regulator-compatible = "dcdc2";
+ };
+
+ dcdc3_reg: regulator@2 {
+ reg = <2>;
+ regulator-compatible = "dcdc3";
+ };
+
+ ldo1_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "ldo1";
+ };
+
+ ldo2_reg: regulator@4 {
+ reg = <4>;
+ regulator-compatible = "ldo2";
+ };
+
+ ldo3_reg: regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo3";
+ };
+
+ ldo4_reg: regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo4";
+ };
+ };
+};
This reverts commit 8e6ebfaa9b384088002baa10f7534efa73a0794e. Without the patch reverted regulators will not work. This prevents MMC to be working for example so the boards can not boot to MMC rootfs. Tested it on beaglebone white and bisect also points to the reverted commit. The issue can be also fixed by adding "regulator-compatible =" to all board dts file for the regulators. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- Hi, I have noticed that bbw did not find the MMC with linux-next, but it turns out that even 4.5-rc4 is behaving the same way. I have run bisect and with this revert patch I can boot up fine. To be honest I don't know why the tps65217.dtsi has been deleted in the first place. .../devicetree/bindings/regulator/tps65217.txt | 10 ---- arch/arm/boot/dts/am335x-bone-common.dtsi | 14 ++---- arch/arm/boot/dts/am335x-chilisom.dtsi | 14 +----- arch/arm/boot/dts/am335x-nano.dts | 14 +----- arch/arm/boot/dts/am335x-pepper.dts | 14 +----- arch/arm/boot/dts/am335x-sl50.dts | 13 +---- arch/arm/boot/dts/tps65217.dtsi | 56 ++++++++++++++++++++++ 7 files changed, 67 insertions(+), 68 deletions(-) create mode 100644 arch/arm/boot/dts/tps65217.dtsi