| Message ID | 1449532649-6471-2-git-send-email-f.fainelli@gmail.com |
|---|---|
| State | New |
| Headers | show |
On Monday 07 December 2015 15:57:27 Florian Fainelli wrote: > This pull request contains the Broadcom ARM-based Device Tree changes for 4.5: > > - Jon Mason enables the following for Broadcom Northstar Plus SoCs: PCI (using > iProc PCI), NAND flash controller (BRCMNAND), TWD Timer and Watchdog > (Cortex-A9), I2C (iProc), clock providers, does some Device Tree cleanups > (re-parenting, fixing register sizes and hierarchy) > > - Jon Mason also adds support for some reference Broadcom Northstar reference > designs like the BCM5301X SVK reference boards, updates the existing binding > documentation to cover the Northstar chips: 4708, 4709 and 53012. > > - Pramod Kumar adds the GPIO to pinctrl mapping for the Broadcom Northstar Plus > SoCs > > - Yendapally Reddy Dhananjaya Reddy adds pinctrl Device Tree nodes for the > Broadcom Northstar Plus SoCs device tree nodes > > - Ray Jui adds Cygnus PCIe PHY Device Tree nodes and enables MSI for the iProc > PCI controller on Cygnus platforms > > - Kapil Hali adds SMP binding documentation and Device Tree nodes for the > Northstar Plus SoCs > > - Florian Fainelli adds clock provider support for the Broadcom BCM63138 DSL > SoCs by utilizing the existing iProc ARM PLL controller, this includes a > stable topic branch from Stephen Boyd to be merged > > - Rafal Milecki adds missing LEDs for the Netgear R8000 router > > Pulled into next/dt, thanks! Arnd
The following changes since commit 8005c49d9aea74d382f474ce11afbbc7d7130bec: Linux 4.4-rc1 (2015-11-15 17:00:27 -0800) are available in the git repository at: http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.5/devicetree for you to fetch changes up to f6b889358a82c1f1a34bfcecfe8ebf709deb28ec: ARM: dts: Enable MSI support for Broadcom Cygnus (2015-12-07 14:14:40 -0800) ---------------------------------------------------------------- This pull request contains the Broadcom ARM-based Device Tree changes for 4.5: - Jon Mason enables the following for Broadcom Northstar Plus SoCs: PCI (using iProc PCI), NAND flash controller (BRCMNAND), TWD Timer and Watchdog (Cortex-A9), I2C (iProc), clock providers, does some Device Tree cleanups (re-parenting, fixing register sizes and hierarchy) - Jon Mason also adds support for some reference Broadcom Northstar reference designs like the BCM5301X SVK reference boards, updates the existing binding documentation to cover the Northstar chips: 4708, 4709 and 53012. - Pramod Kumar adds the GPIO to pinctrl mapping for the Broadcom Northstar Plus SoCs - Yendapally Reddy Dhananjaya Reddy adds pinctrl Device Tree nodes for the Broadcom Northstar Plus SoCs device tree nodes - Ray Jui adds Cygnus PCIe PHY Device Tree nodes and enables MSI for the iProc PCI controller on Cygnus platforms - Kapil Hali adds SMP binding documentation and Device Tree nodes for the Northstar Plus SoCs - Florian Fainelli adds clock provider support for the Broadcom BCM63138 DSL SoCs by utilizing the existing iProc ARM PLL controller, this includes a stable topic branch from Stephen Boyd to be merged - Rafal Milecki adds missing LEDs for the Netgear R8000 router ---------------------------------------------------------------- Florian Fainelli (3): clk: iproc: Extend binding to cover BCM63138 clk: bcm: Add BCM63138 clock support ARM: dts: BCM63xx: Add ARMPLL device tree nodes Jon Mason (9): ARM: dts: NSP: Add PCI support ARM: dts: NSP: Add NAND Support to DT ARM: dts: NSP: Add TWD Support to DT dt-bindings: Add new SoCs to bcm4708 DT bindings ARM: dts: bcm5301x: Add BCM SVK DT files ARM: dts: NSP: Device Tree clean-ups ARM: dts: NSP: Add I2C support to the DT ARM: dts: enable clock support for BCM5301X ARM: dts: enable clock support for Broadcom NSP Kapil Hali (2): dt-bindings: add SMP enable-method for Broadcom NSP ARM: dts: Add SMP support for Broadcom NSP Pramod Kumar (2): dts: pinctrl: Add GPIO to Pinctrl pin mapping in DT ARM: dts: Cygnus: define ngpios property in gpio controller's node Rafał Miłecki (1): ARM: BCM5301X: Add missing Netgear R8000 LEDs Ray Jui (2): ARM: dts: enable PCIe PHY support for Cygnus ARM: dts: Enable MSI support for Broadcom Cygnus Yendapally Reddy Dhananjaya Reddy (1): ARM: dts: enable pinctrl for Broadcom NSP .../devicetree/bindings/arm/bcm/brcm,bcm4708.txt | 7 + .../bindings/arm/bcm/brcm,nsp-cpu-method.txt | 39 ++++ Documentation/devicetree/bindings/arm/cpus.txt | 1 + .../bindings/clock/brcm,iproc-clocks.txt | 5 + arch/arm/boot/dts/Makefile | 5 +- arch/arm/boot/dts/bcm-cygnus.dtsi | 101 ++++++++- arch/arm/boot/dts/bcm-nsp.dtsi | 232 +++++++++++++++++++-- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 30 +++ arch/arm/boot/dts/bcm5301x.dtsi | 92 ++++++-- arch/arm/boot/dts/bcm63138.dtsi | 36 +++- arch/arm/boot/dts/bcm94708.dts | 56 +++++ arch/arm/boot/dts/bcm94709.dts | 56 +++++ arch/arm/boot/dts/bcm953012k.dts | 63 ++++++ arch/arm/boot/dts/bcm958625k.dts | 59 ++++++ drivers/clk/bcm/Kconfig | 10 + drivers/clk/bcm/Makefile | 1 + drivers/clk/bcm/clk-bcm63xx.c | 22 ++ 17 files changed, 762 insertions(+), 53 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt create mode 100644 arch/arm/boot/dts/bcm94708.dts create mode 100644 arch/arm/boot/dts/bcm94709.dts create mode 100644 arch/arm/boot/dts/bcm953012k.dts create mode 100644 drivers/clk/bcm/clk-bcm63xx.c